029110 Sterile Liquid Paraffin

Introduction

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.

Details

Specifications

Features	Specifications
Recommended application	Small amounts of nucleic acid isolation, viral nucleic acid from cell free samples
Preservation conditions	Room temperature
Stability	Up to 4 years
Filter membrane	High quality glass fiber filter GF/F, 2 layers
Membrane aperture	0.7μm
Maximum binding yield of plasmid	30 μg
Maximum yield of alcohol mediated Binding	100 μg
Single liquid carrying capacity of column	900 μl
Minimum elution volume	80 μl
Withstand centrifugal force	5,000 x g
Centrifuge	Low speed centrifuge, Swing out Rotor, can placed a height of 6.5cm square,  (height of HiPure DNA Plate & 1.6ml Collection Plate: height, 6.2cm)

Adsorption Mechanism

Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silica gel membrane, while other pollutants, mainly proteins, are removed by membrane washing.

Ordering information

CAT.No.	Product Name	Package
C13130	HiPure DNA Plate (2 x GF/F)with 1.6ml Collection Plate	10/Bag

Purchase Guide

Item No.	Product Name	Membrane type/number of layers	Collection tubes	Plasmid DNA binding capacity (Physical adsorption)	gDNA/RNA binding capacity (Alcohol-mediated adsorption)	Minimum Elution volume	Liquid volume capacity
C13010	HiPure DNA Nano Column	2 layers GF/F	2ml without cap	5μg	20μg	10μl	700μl
C13011	HiPure DNA Micro Column	3 layers GF/F	2ml without cap	10μg	50μg	15μl	700μl
C13100	HiPure DNA Mini Column I	2 layers GF/B	2ml without cap	15μg	100μg	30μl	700μl
C13110	HiPure DNA Mini Column II	4 layers GF/B	2ml without cap	35μg	200μg	50μl	800μl
C13111	HiPure RNA Mini Column	3 layers GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13112	HiPure Viral Mini Column	3 layers GF/F	2ml without cap	30μg	200μg	30μl	800μl
C13113	HiPure CFDNA Mini Column	3 layers GF/F,1 layer GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13120	HiPure DNA Midi Column	4 layers GF/B	15ml Centrifuge tube	125μg	1mg	500μl	4ml
C13121	HiPure DNA Midi Column III	8 layers GF/B	15ml Centrifuge tube	250μg	1mg	500μl	4ml
C13122	HiPure DNA Maxi Column	4 layers GF/B	50ml Centrifuge tube	500μg	5mg	1000μl	20ml
C13123	HiPure DNA Maxi Column III	8 layers GF/B	50ml Centrifuge tube	1mg	5mg	1000μl	20ml
C13124	HiPure DNA Maxi Column C	8 layers GF/B	50ml high speed Centrifuge tube	1mg	5mg	700μl	12ml
C13130	HiPure DNA Plate	2 layers GF/F	1.6ml Plate	30μg	100μg	80μl	900μl
C13131	HiPure gDNA Plate	2 layers GF/B	1.6ml Plate	30μg	100μg	80μl	900μl

Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

Introduction

Usages:
For isolating lactose-fermenting Gram-negative enteric bacilli.

Principle:
Peptones are sources of nitrogen and other nutrients. Lactose is a fermentable carbohydrate. When lactose is fermented, alocal pH drop around the colony causes a color change in the pH indicator (neutral red) and bile precipitation. Bile salts,bile salts no. 3, oxgall and crystal violet are selective agents that inhibit growth of gram-positive organisms. Agar is the solidifying agent.

Formulation（per liter）:

Pancreatic Digest of Gelatin	17.0 g
Peptones (meat and casein)	3.0 g
Lactose Monohydrate	10.0 g
Sodium Chloride	5.0 g
Bile Salts	1.5 g
Agar	13.5 g
Neutral Red	30.0 mg
Crystal Violet	1 mg
Final pH	7.1±0.2

How to use：
1.Suspend 50 g in 1 L of distilled or deionized water. Heat to boiling to dissolve completely. Autoclave at 121°C for 15 minutes.

2.Transfer 1 mL of Soybean–Casein Digest Broth to 100 mL of MacConkey Broth, and incubate at 42 to 44 for 24 to 48 hours. Subculture on a plate of MacConkey Agar at 30 to 35 deg.C for 18 to 72 hours.

Quality control：
          　　

Item	The name and number of strain	PR/G	Reaction
Growth rate	E.Coli ATCC8739	PR≥0.7	Rose-red
Characteristic difference	Proteus mirabilis CMCC(b)49005	PR≥0.7	Colorless, no swarming
Selective	Staphylococcus aureus ATCC6538	G≤1	－

Storage: Keep container tightly closed, store in a cool, dry place, away from bright light. Storage period of three years.

Specifications: 250g/bottle

250g

Gel images of different ranges of library size selection. Sheared human genomic DNA was used as input.

.

Library size selection is an enrichment of a specific range of library sizes for NGS library preparations. The NGS library preparation is related to the quality of the sequencing data. Precise NGS library size selection can increase sequencing efficiency, improve data quality, and reduce costs.

There are two types of sequencing technologies: short-read sequencing and long-read sequencing. Short-read sequencing uses DNA libraries that contain small insert DNA fragments of similar sizes, usually several hundred base pairs. The sequencing efficiency can be improved if the DNA size selection is in the right range. Cat.# 20104S and 20104L are the best kits for NGS library size selection of illumina paired-end 100 (PE100) sequencing with 100-200 bp library inserts; Cat.# 20105S and 20105L are the best kits for NGS library size selection of illumina paired-end 150 (PE150) sequencing with 150-300 bp library inserts; and Cat.# 20106S and 20106L are the best kits for NGS library size selection of illumina paired-end 300 (PE300) sequencing with 300-600 bp library inserts.

Long-read sequencing uses a large DNA fragment as input and makes very long reads. Usually, library size selection is preferred to remove smaller fragments. Cat.# 20110S and 20110L are the best kits for long-read sequencing size selection with DNA sizes >5 kb, and Cat.# 20111S and 20111L are the best kits for long-read sequencing size selection with DNA sizes >10 kb.

The magnetic beads, or SPRI (Solid Phase Reversible Immobilization) beads, is well used for the purification of DNA due to their reversible DNA binding. The NGS library can be size-selected by the magnetic beads or SPRI beads. The properties of the magnetic beads can be changed for a specific range of DNA binding. The contaminants and other unwanted components in the libraries can also be removed during size selection.

Specific ranges of NGS libraries can be selected using magnetic beads with different buffer compositions. The first DNA-beads binding step, also called the right-side clean-up, removes large NGS library fragments. The large NGS library fragments that bind to the beads are discarded with the beads pellet. The desired NGS library fragments in the supernatant are transferred to a new well, and new beads are added to the supernatant for the second beads-DNA binding, also called the left-side clean-up. After the rinsing step, the NGS library fragments with the dual selection are eluted in water or an appropriate buffer. The magnetic beads method has great advantages over time-consuming column purification and tedious gel-based purification.

NGS library size selection with dual clean-ups.

.

Library size selection for long-read sequencing only requires a single clean-up. In this case, only the large library fragments are bound to the beads, while other small library fragments are discarded with the supernatant. The selected larger library fragments are eluted in water or an appropriate buffer after the rinsing step.

NGS library size selection with single clean-up for >5 kb and >10 kb libraries.

.

Features of NGS library size selection

• • • 5 ranges for NGS library size selection
      • • illumina PE100 sequencing: 250-350 bp
        • illumina PE150 sequencing: 300-450 bp
        • illumina PE100 sequencing: 450-750 bp
        • Long-read sequencing: >5 kb
        • Long-read sequencing: >10 kb
    • Rapid protocol: only 20 minutes
    • Simple workflow
      • • No columns required
        • No gel purification required
        • No centrifugation required