How to use： 1.Suspend 18g in 1L of distilled water, stirring heated to boiling to completely dissolve, autoclave at 121℃ for 15 minutes. 2.Diluted and treated samples.
Quality control：
Item
The name and number of strain
Growth
Colony Color
1
Escherichia coli ATCC25922
Good
Turbid broth,slight precipitate
2
Staphylococcus aureus ATCC25922
Good
Turbid broth,slight precipitate
Storage: Keep container tightly closed, store in a cool, dry place, away from bright light. Storage period of 3 years.
Specifications: 250g/bottle
Other Products
1 kb Plus DNA Ladder in Ready-to-load format.
Product Info
Document
Product Info
1 kb Plus DNA Ladder in 1% agarose gel.
• For sizing and quantification of double strand DNA fragments. • Composed of 13 bands as shown on right. • The 10 kb and 4 kb bands with higher concentration are easily distinguishable from the others. • Premixed with 6X DNA loading buffer for direct gel loading.
Document
1 kb Plus DNA Ladder in 1% agarose gel.
• For sizing and quantification of double strand DNA fragments. • Composed of 13 bands as shown on right. • The 10 kb and 4 kb bands with higher concentration are easily distinguishable from the others. • Premixed with 6X DNA loading buffer for direct gel loading.
Free-circulating nucleic acids, such as tumor-specific extracellular DNA fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments, <1000bp (DNA). HiPure Circulating DNA Mini Kit enables efficient purification of these circulating nucleic acids from human plasma, serum, or urine. Samples can be fresh or frozen (provided that they have not been frozen and thawed more than once).
Details
Specifications
Features
Specifications
Main Functions
Isolation circulating DNA from 1ml plasma, serum, body fluids
Applications
qPCR, liquid or solid chip analysis, hybridization and SNP detection, etc.
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Serum, plasma and other cell-free fluid samples
Sample amount
1ml
Elution volume
≥30μl
Time per run
≤50 minutes
Liquid carrying volume per column
800µl
Binding yield of column
100µg
Principle
This product is based on silica gel purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption plate and filter column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10 Mm Tris,pH 8.0).
Advantages
High yield – most optimal process, free DNA (>50bp) can be obtained to the maximum extent
High concentration – low elution volume, ensuring high nucleic acid concentration
High purity – low alcohol binding method, completely removing inhibitor and protein pollution
High recovery – DNA can be recovered at the level of PG by silica gel column purification
Kit Contents
Contents
D318102
D318103
Purification Times
50 Preps
250 Preps
Buffer ACL
50 ml
250 ml
Buffer ACB*
60 ml
300 ml
Buffer DCW1*
22 ml
88 ml
Buffer DCW2*
10 ml
50 ml
Proteinase K
120 mg
540 mg
Protease Dissolve Buffer
10 ml
30 ml
Carrier RNA
110 μg
310 μg
Nuclease Free Water
10 ml
30 ml
HiPure CFDNA Mini Columns
50
250
2 ml Collection Tubes
100
500
Storage and Stability
Proteinase K and carrier RNA should be stored at 2–8°C upon arrival. However, short-term storage(up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remainingkit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions.The entire kit can be stored at 2–8°C, but in this case buffers shouldbe redissolved before use. Make sure that all buffers are at room temperature when used.
Document
Free-circulating nucleic acids, such as tumor-specific extracellular DNA fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments,
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
Document
Exceptional value for money Rapid detection of all clinically relevant subtypes Positive copy number standard curve for quantification Highly specific detection profile High priming efficiency Broad dynamic detection range (>6 logs) Sensitive to < 100 copies of target
Accurate controls to confirm findings
150 reactions
