Usages： For determination of coliform confirmatory test for multi-tube fermentation.
Principle: Peptone provide carbon and nitrogen sources; lactose as fermentable sugars; ox bile powder and brilliant green inhibit the non-Enterobacteriaceae.
Formulation (per liter): Peptone: 10g Lactose: 10g Ox bile powder: 20g Brilliant green: 0.0133g Final pH7.2 ± 0.2
How to use: 1.Suspend 40g of the product, add 1 L of distilled water, stirring heated to boiling until completely dissolved, packed in a test tube with a small inverted tube, autoclave at 121 ℃ for 15min, cool to room temperature and set aside. 2.Sample handling and dilution. Slightly. 3.Transplanted LST broth tube to brilliant green lactose bile broth tube by using a inoculating loop. 4.the tube was placed in an incubator culture at 36 ± 1 ℃ for 24h. 5.Observe the results. Press production trachea number, check table report MPN MPN value per gram (mL) sample of coliform bacteria.
Quality control: Quality control strains were inoculated and culuture at 36 ± 1 ℃ for 24h ,results are as follows: Bacterial Name Bacterial No. Growth Status Gassing Escherichia coli ATCC25922 good +
Salmonella typhimurium CMCC (B) 50115 good —
Staphylococcus aureus ATCC6538 inhibited —
Storage: Store in a dark, cool and dry place, tighten the cap immediately after use. Storage period of three years.
Specifications: 250g/bottle
Other Products
iST-128 QuickSeal qPCR Optical™
Product Info
Document
Product Info
Overview
A transparent, optically clear, DMSO resistant, non-tacky film which adheres only when pressure is applied. It is non-pierceable and peelable. Clear plastic, reflective, glossy on the top. Very thin and light and doesn’t crease easily.
Crystal clear seal specifically developed for optical applications, particularly qPCR
Non-sticky when removed from the packaging aiding with handling when using gloves
When the seal is in position, pressure can be applied to burst the capsules, releasing a strong adhesive only where the seal touches the raised well rims of the plate – the rest of the seal area above the wells remains optically clear
Document
A transparent, optically clear, DMSO resistant, non-tacky film which adheres only when pressure is applied. It is non-pierceable and peelable. Clear plastic, reflective, glossy on the top. Very thin and light and doesn’t crease easily.
Hipure Microbial RNA kit is suitable for extracting high-purity total RNA from bacterial/yeast culture medium. This kit combines high-efficiency Magzol Reagent (one-step extraction reagent) and silicagel column purification technology to complete the extraction of high-purity total RNA in only 40 minutes. The obtained RNA can be directly used in RT-PCR, Northern blot, poly-A + purification, nucleic acid protection and in vitro translation.
Details
Specifications
Features
Specifications
Main Functions
Isolation total RNA from bacteria, yeast cells
Applications
RT-PCR, Northern blot, poly-A + purification, nucleic acid protection and in vitro translation
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Bacteria, yeast cells
Sample amount
Bacteria: <10^9；Yeast cells：<2 x10^7
Elution volume
≥30μl
Time per run
≤40 minutes
Liquid carrying volume per column
800µl
Binding yield of column
100µg
Principle
Hipure silica gel column is based on glass fiber filter membrane with high binding force. Under the condition of high concentration of ionizing agent (such as guanidine hydrochloride or guanidine isothiocyanate), the filter membrane can adsorb nucleic acid through hydrogen bond and electrostatic, while protein and other impurities are not adsorbed and removed. The filter membrane adsorbed with nucleic acid is washed to remove the residual protein and salt. Finally, the nucleic acid adsorbed on the filter membrane can be washed out with low salt buffer (such as buffer TE) or water. The obtained nucleic acid has high purity and can be directly used in various downstream experiments.
Advantages
Fast – several samples can be extracted in 30 minutes
High purity – the purified RNA can be directly used in various downstream applications
High recovery – RNA can be recovered at the level of PG
Good repeatability – silica gel column purification technology can obtain ideal results every time
Broad spectrum – it can deal with various bacteria, including Gram-positive bacteria that are difficult to be lysed
Sufficient components – the kit contains carried wall breaking enzymes and glass beads
Kit Contents
Contents
R418202
R418203
Purification Times
50 Preps
250 Preps
HiPure RNA Mini Columns
50
250
2ml Collection Tubes
50
250
Glass Beads (0.1-0.6mm)
30 g
150 g
DNase I
600 μl
5 x 600 μl
DNase Buffer
6 ml
30 ml
Protease Dissolve Buffer
1.8 ml
15 ml
Buffer ATL
50 ml
200 ml
Buffer PHC
50 ml
200 ml
Buffer GXP2*
20 ml
100 ml
Buffer RW1
50 ml
250 ml
Buffer RW2*
20 ml
2 x 50 ml
RNase Free Water
10 ml
30 ml
Storage and Stability
Buffer PHC should be stored at 2–8°C upon arrival. DNase I should be stored at -20°C. However, short-term storage (DNase I up to 1 weeks, Buffer PHC up to 12 weeks) at room temperature(15–25°C) does not affect their performance. The remaining kit components can be stored at roomtemperature (15–25°C) and are stable for at least 18 months under these conditions.
Document
Hipure Microbial RNA kit is suitable for extracting high-purity total RNA from bacterial/yeast culture medium. This kit combines high-efficiency Magzol Reagent (one-step extraction reagent) and silicagel column purification technology to complete the extraction of high-purity total RNA in only 40 minutes. The obtained RNA can be directly used in RT-PCR, Northern blot, poly-A + purification, nucleic acid protection and in vitro translation.
[TP1000] ExcelTaq™ Taq DNA Polymerase, 5 U/μl, 500 U
Product Info
Document
Product Info
Description
ExcelTaq™ Taq DNA Polymerase is a recombinant thermo-stable Taq DNA polymerase expressed and purified from an E. coli strain carrying the cloned gene. With a high DNA synthesis rate and high thermo-stability, ExcelTaq™ Taq DNA Polymerase is suitable for common and specialized PCR applications.
Features
5’→3′ DNA polymerase activity
5’→3′ exonuclease activity
No detectable 3’→5′ exonuclease (proofreading) activity
Generates PCR products with 3’-dA overhangs
Thermo-stable – half-life lasts for more than 40 min at 95°C
Applications
Routine PCR
Amplification of DNA fragments up to 8 kb
Generation of PCR products for TA cloning
DNA labeling
Storage
-20°C for 24 months
Document
ExcelTaq™ Taq DNA Polymerase is a recombinant thermo-stable Taq DNA polymerase expressed and purified from an E. coli strain carrying the cloned gene. With a high DNA synthesis rate and high thermo-stability, ExcelTaq™ Taq DNA Polymerase is suitable for common and specialized PCR applications.
