Permagen’s 24 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 24 tubes
Detail
Permagen’s 24 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 24 tubes
Accommodates many common 1.5 mL Microcentrifuge and some 2.0 mL tubes
Tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
Fructan
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
410
Signal Response:
Increase
Linear Range:
2.3 to 55 µg of D-fructose or D-glucose per assay
Limit of Detection:
0.16 g/100 g
Total Assay Time:
~ 90 min
Application examples:
Flours, infant formula, animal feed, pet foods, plant materials (e.g. onion), food products and other materials
Method recognition:
AACC Method 32-32.01, AOAC Method 999.03, AOAC Method 2016.14, AOAC Method 2018.07 and CODEX Method Type III
The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).
New, improved procedure.
In the most recent development, a recombinant endo-levanase has been incorporated into the fructanase mixture, extending the use of the method to the measurement of levan-type fructans as are present in grasses such as timothy, cocksfoot, ryegrass and red fescue.
The method described in this booklet employs ultra-pure, recombinant enzymes and specifically measures fructans including inulin-type fructans from chicory, dahlia, jerusalem artichoke; highly branched fructans from onion and wheat stems and leaves; and levan-type fructans from pasture grasses such as timothy grass. The enzymes employed are completely devoid of contaminating enzymes active on β-glucan or gluco-oligosaccharides.
All kit reagents stable for > 2 years after preparation
Unaffected by high sucrose / reducing sugar concentrations
Fructan kits are only available from Megazyme
Simple format
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Document
The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).
Diagnosticgrade – because RUO and IVDR do not fit together
Product Info
Document
Product Info
Diagnosticgrade – because RUO and IVDR do not fit together
This unique quality seal ensures high quality and performance of raw materials ideally suited for use in development projects for IVD
With the DiagnosticGrade seal, the partners Johner Institut and myPOLS Biotec combine high-quality products, including reliable and reproducible product performance and knowledge on product verification procedures, including documentation to meet the requirements of the IVDR:
IVD manufacturers can obtain reagents developed and produced by myPOLS Biotec under ISO 13485.
We offer you the quality and safety that the IVDR requires from suppliers – these are, for example, control of suppliers via quality assurance agreements, information about changes, consent to audits.
The Johner Institute provides structured templates for the documentation of your product verification with clear and brief explanations of how to complete them.
Both cooperation partners express with the DiagnosticGrade seal that the reagents meet the relevant requirements and thus ensure the maturity level for diagnostics.
Diagnsoticgrade facilitates the development of new IVD assay products for IVD manufacturers and enables IVDR compliance of existing kits.
With the DiagnosticGrade seal, the partners Johner Institut and myPOLS Biotec combine high-quality products, including reliable and reproducible product performance and knowledge on product verification procedures, including documentation to meet the requirements of the IVDR:
Storage term: stored at ≤-20℃,keep away from light, avoid heavy weight and repeated freezing and thawing.
Term of Validity: 14 months
Isothermal nucleic acid Principle Summary
The kit is based on room and constant temperature nucleic acid rapid amplification technology, its principle is that at room and constant temperature, the recombinase and primer form a protein/single-stranded nucleotide complex Rec/ssDNA, and invade the double-stranded DNA template with the help of auxiliary proteins and single-stranded binding protein SSB; then form a D-loop region at the invasion point and start to scan the DNA duplex, after finding the target region complementary to the primer and disintegration of the complex Rec/ssDNA, the polymerase also binds to the 3′ end of the primer to start the chain extension. The kit relies on the role of NFO enzyme and adds the designed specific molecular probes according to the template, and get the result by colloidal gold technology (sandwich method).
Technical Parameters:
Parameters
Details
Product Name
DNA Isothermal Amplification Kit NFO
Manufacturer
Amp-future
Storage Temperature
-20°C
Kit Components
Enzymes, Buffers ,Reagents
Packaging
48 Tests/box
Detection Limit
500-1000copies/µL
Shipping
ICE
Test Time
5-20mins
Isothermal nucleic acid Product Features
1/ High sensitivity and specificity, short reaction time.
2/ The reagent form is freeze-dried, stable and easy to operate.
3/ The reaction can be operated by metal bath and water bath pot without purchasing expensive PCR apparatus.
Isothermal nucleic acid Applications
Suitable for DNA isothermal rapid amplification kit(NFO type)
Primer: Require pair of nucleotide primers with the length of 25-35 bp.
DNA basic kit reaction temperature is 39 to 42℃ and time is 5-20 minutes.
Notes
1/ Please avoid nucleic acid contamination and set blank control during reaction due to the high sensitivity of the kit.
2/ Please take out the required quantity of MIRA reaction units for the experiment, and put the rest under storage conditions when performing the experiment.
Document
The kit is based on room and constant temperature nucleic acid rapid amplification technology, its principle is that at room and constant temperature, the recombinase and primer form a protein/single-stranded nucleotide complex Rec/ssDNA, and invade the double-stranded DNA template with the help of auxiliary proteins and single-stranded binding protein SSB; then form a D-loop region at the invasion point and start to scan the DNA duplex, after finding the target region complementary to the primer and disintegration of the complex Rec/ssDNA, the polymerase also binds to the 3′ end of the primer to start the chain extension. The kit relies on the role of NFO enzyme and adds the designed specific molecular probes according to the template, and get the result by colloidal gold technology (sandwich method).