The PCR Decontamination Kit can remove contaminating DNA in PCR master mixes, without reduction of PCR sensitivity.
Decontamination of master mixes without reduction of sensitivity has always been a challenge. Especially when minor amounts of DNA are targeted, contaminating DNA is a major problem. Any loss of sensitivity in the qPCR assay caused by the decontamination protocol is unacceptable.
In Figure 1, it is demonstrated that the PCR decontamination kit can remove contaminating DNA from a qPCR mix to non-detectable levels (flat NTC), without affecting the sensitivity of the qPCR.
The PCR Decontamination Kit can remove contaminating DNA in PCR master mixes, without reduction of PCR sensitivity.
This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.
Specifications
Features | Specifications |
Main Functions | Isolation total DNA from tissue / blood / body fluid / swab /dry blood spots |
Applications | PCR, qPCR, southern bolt and virus detection, etc. |
Purification method | Mini spin column |
Purification technology | Silica technology |
Process method | Manual (centrifugation or vacuum) |
Sample type | Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples |
Sample amount | Solid tissue : 1-10mg, Anticoagulant blood : 200μl |
Yield | 1 – 15µg |
Elution volume | ≥20μl |
Time per run | 30 – 60 minutes |
Liquid carrying volume per column | 750µl |
Binding yield of column | 100µg |
This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Contents | IVD3018 |
Purification Times | 100 |
2ml Collection Tubes | 2 x 100 |
Buffer ATL | 60 ml |
Buffer AL | 60 ml |
Buffer GW1 | 44 ml |
Buffer GW2 | 50 ml |
Proteinase K | 60 mg |
Protease Dissolve Buffer | 5 ml |
Buffer AE | 15 ml |
Storage and Stability
Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
Experiment Data
This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.
TD6 Table top laboratory centrifuge
TD6 Features:
1. Widely used in hospital, laboratory and blood bank.
2. Brushless DC motor for model TD6 which in great torque, free maintenance, no powder pollution, quick in speed up and down.
3. The flexible axle driven system which drive the rotor directly, smooth in operation, low noise and small vibration.
4. Micro computer control system, digital display the RCF、time and speed. There are 10 kinds of program and 10 kinds of acceleration and deceleration for your choice.
5. Electric lid lock, compact design, super speed and imbalance protection.
6. The centrifuge body is made of high-quality steel, safe and reliable.
TD6 Technical Parameters:
Max speed | 6000rpm | Max RCF: | 4430xg |
Max volume | 6x100ml | Noise: | ≤55dBA |
Timer | 0~99min | Net weight: | 32KG |
Dimension(HxDxW): | 540×370×280mm | Power supply | AC 110/220V 50HZ/60hz |
Speed accuracy | ±20rpm | Acc/Dec | 10 Kinds |
Certifications | CE, ISO & Calibration report is available. | Warranty | 1 Year |
Matched Rotors for TD6:
Order No. | Rotor | Max Speed (rpm) | Max Volume(ml) | Max. RCF(×g) |
D6-1 | Angle Rotor | 6000 | 6×15/10/7/5ml | 3660 |
D6-2 | Angle Rotor | 6000 | 12×15/10/7/5ml | 4430 |
D6-3 | Angle Rotor | 6000 | 6×50ml | 4110 |
D6-4 | Angle Rotor | 6000 | 4×50ml | 3620 |
D6-5 | Angle Rotor | 6000 | 4×100ml | 3790 |
D6-6 | Angle Rotor | 5000 | 24×15/10/7/5ml | 3500 |
D6-7 | Angle Rotor | 4000 | 12×50ml | 2470 |
D6-8 | Angle Rotor | 5000 | 6×100ml | 3130 |
D6-9 | Swing Rotor | 5000 | 4x100ml | 4420 |
D6-10 | Swing Rotor | 5000 | 4x50ml | 4420 |
D6-11 | Swing Rotor | 5000 | 4x4x15ml | 2820 |
D6-12 | Swing Rotor | 4000 | 4x6x10ml | 2580 |
D6-13 | Swing Rotor | 4000 | 4x4x10ml | 2580 |
D6-14 | Microplate | 4000 | 2x2x96well | 2020 |
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : hej@a3p-scientific.com
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map