This kit is suitable for high-throughput extraction of total RNA from paraffin embedded tissue samples, including miRNA. The kit is based on superparamagnetic magnetic particle purification technology. The extraction process does not require the use of toxic phenolic chloroform extraction or time-consuming alcohol precipitation.The whole extraction process only takes 120 minutes. The obtained RNA can be directly used in RT-PCR. The high-throughput extraction can be realized by 96 hole magnetic frame and 96 holeo scillator, various nucleic acid extractors (such as KingFisherFle, MagMix32, MagMix 96) or cooperating with the pipette workstation (Hamilton, Tican) for automatic extraction.
Specifications
| Features | Specifications |
| Main Functions | Isolation total RNA from FFPE tissue |
| Applications | RT-PCR, cDNA synthesis, second generation sequencing |
| Products | RNA, miRNA |
| Purification method | Polydisperse magnetic beads |
| Purification technology | Magnetic beads technology |
| Process method | Manual or automatic |
| Adaptive instrument | Nucleic acid extractor, pipetting workstation |
| Sample type | FFPE slice, FFPE embedded tissue |
| Sample amount | ≤6 slices |
This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.
Advantages
Kit Contents
| Contents | IVD3022 |
| Purification Times | 200 Preps |
| MagBind Particles | 4.5 ml |
| Proteinase K | 100 mg |
| Protease Dissolve Buffer | 6 ml |
| DNase I | 4 x 600 µl |
| DNase Buffer | 30 ml |
| Buffer DPS | 200 ml |
| Buffer FRL | 40 ml |
| Buffer AL | 40 ml |
| Buffer MW1* | 110 ml |
| Buffer MW2* | 2 x 50 ml |
| Nuclease Free Water | 30 ml |
Storage and Stability
Proteinase K and MagBind Particles should be stored at 2–8°C upon arrival. DNase I should bestored at -20°C. However, short-term storage (DNase I up to 1 weeks, Proteinase K and MagBind Particles up to 8 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under theseconditions.
This kit is suitable for high-throughput extraction of total RNA from paraffin embedded tissue samples, including miRNA. The kit is based on superparamagnetic magnetic particle purification technology. The extraction process does not require the use of toxic phenolic chloroform extraction or time-consuming alcohol precipitation.The whole extraction process only takes 120 minutes. The obtained RNA can be directly used in RT-PCR. The high-throughput extraction can be realized by 96 hole magnetic frame and 96 holeo scillator, various nucleic acid extractors (such as KingFisherFle, MagMix32, MagMix 96) or cooperating with the pipette workstation (Hamilton, Tican) for automatic extraction.
Description
The DM3160 FluoroBand™ 1KB (0.25-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA ladder DM3160 is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.
Features
Source
Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.
Range
250 ~ 10,000 bp
Concentration
50 µg/ 500 µl
Recommended loading volume
5 µl/ well
Storage
Protected from light
Room temperature for 6 months
4°C for 12 months
-20°C for 24 months
The DM3160 FluoroBand™ 1KB (0.25-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA ladder DM3160 is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.
K-CARREZ
SKU: 700004270
40-1000 assays per kit (depending on application)
| Content: | 40-1000 assays per kit (depending on application) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: Ambient, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Reaction Time (min): | ~ 15 min |
| pH Range: | 7.5-8 (recommended) |
| Application examples: | Dairy samples including milk, cream, whey protein, cheese, yoghurt and infant formula. Other foodstuffs such as meat, fish may also be possible. |
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.
This product is intended to be used as an accessory kit to the K-LOLAC, K-LACTUL, K-LACGAR, K-LATE, K-DLATE and K-FRHYD assay kits. It may also be suitable for other assay methods where sample clarification is required to remove fats or proteins before sample determination steps.
Note: this method is unsuitable for sample preparation prior to the determination of ascorbic acid (vitamin C), citrate and urea/ammonia.
Advantages
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.