General information

Champion™ Competent Cells are chemically competent cells, which were prepared by SMOBIO to make E. coli perform excellent transformation efficiency. Standard transformation protocol is recommended for large plasmids or non-ampicillin selection. Time-saving transformation protocol is recommended for simple and rapid transformation. Champion™ Competent Cells are one of the fastest and simplest ready-to-use competent cell products in the world.

Kit contents

1. Champion™ Competent Cells
2. pUC19 Control Plasmid (5 μl, 10-4 μg/μl)
3. Champion™ Transformation Protocol Card

Shipping condition

Throughout the shipping process, the temperature is maintained under -70°C. 

Storage and expiration 

Champion™ Competent Cells must be stored between -70°C to -80°C. Subsequent freeze-thaw cycles will reduce transformation efficiency. If high efficiency is required for the experiment, do not use aliquots that have gone through several freeze-thaw cycles. The efficiency of Champion™ Competent Cells lasts for 1 year with proper storage.

Champion™ Competent Cells are chemically competent cells, which were prepared by SMOBIO to make E. coli perform excellent transformation efficiency. Standard transformation protocol is recommended for large plasmids or non-ampicillin selection. Time-saving transformation protocol is recommended for simple and rapid transformation. Champion™ Competent Cells are one of the fastest and simplest ready-to-use competent cell products in the world.

Introduction

The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 20µg plasmid DNA from 1.5ml bacterial culture using 96 well bind plate and 96 filterplate
Applications	Enzyme digestion, sequencing, PCR, labeling, etc.
Purification method	96 well plate
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Conventional plasmid, plasmid less than 30KB
Sample amount	1-1.5ml（x96）
Yield	1-15µg/1ml
Elution volume	≥70μl
Time per run	≤60 minutes
Liquid carrying volume per column	800µl
Binding yield of column	70µg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – it takes only 60 minutes to complete the isolation
• High yield – up to 1mg plasmid can be binded in one column
• Economy – high cost performance

Kit Contents

Contents	P100601	P100602	P100603
Purification Times	1 x 96 Preps	4 x 96 Preps	20 x 96 Preps
RNase A	5 mg	20 mg	100 mg
Buffer P1	30 ml	120 ml	600 ml
Buffer P2	30 ml	120 ml	600 ml
Buffer P3	40 ml	180 ml	800 ml
Buffer PW1	100 ml	500 ml	2 x 1000 ml
Buffer PW2	50 ml	2 x 100 ml	4 x 200 ml
Elution Buffer	150 ml	60 ml	300 ml
Lysate Clear Plate	1	4	20
HiPure DNA Plate	1	4	20
1.6 ml Collection Plate	1	4	20
0.5ml Elute Plate	1	4	20

Storage and Stability

The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.

The Opentrons Flex Gripper GEN1 attaches to the gantry and is capable of moving labware across the deck and on or off modules such as the Magnetic Block or Thermocycler. It can also access the additional slots to the side of the main deck to replenish tips or labware. The gripper can be used with any pipette configuration.

Included with the gripper is a calibration pin that enables automatic calibration to ensure positional accuracy. Currently, the gripper is optimized for use with the following labware items:

– NEST 2 mL 96 Deep Well Plate, V bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 Well Plate Flat
– All Opentrons Flex tip racks

The Opentrons Flex Gripper GEN1 attaches to the gantry and is capable of moving labware across the deck and on or off modules such as the Magnetic Block or Thermocycler. It can also access the additional slots to the side of the main deck to replenish tips or labware. The gripper can be used with any pipette configuration.

Included with the gripper is a calibration pin that enables automatic calibration to ensure positional accuracy. Currently, the gripper is optimized for use with the following labware items:

– NEST 2 mL 96 Deep Well Plate, V bottom
– Opentrons Tough 0.2 mL 96-Well PCR Plate, Full Skirt
– NEST 96 Well Plate Flat
– All Opentrons Flex tip racks