Introduction

This product is suitable for rapid extraction of DNA from FFPE sample, tissue, cells, blood, swabs, blood spots, semen and other clinical samples. This product uses size selection magnetic beads, which can selectively remove small sizes of DNA (100-300bp) from FFPE samples by adjusting the amount of binding solution, so as to improve the effective data volume of downstream NGS.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from FFPE using high bind beads
Applications	RT-PCR, northern blot, poly A purification, nucleic acid protection and in vitro translation, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Large quantities of solids
Sample amount	Appropriate
Elution volume	≥50μl
Time per run	30 – 120 minutes

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

1.Use non-toxic dewaxing solution without contact with xylene

2.Efficient removal of formaldehyde modification on DNA and improvement of PCR sensitivity

3. One of the best FFPE DNA extraction kits on the market, the same effect of paraffin slice extraction as top brand, and the effect of puncture sample extraction is even better than top brands

Kit Contents

Contents	D632301B	D632302B
Purification Times	48 Preps	96 Preps
MagBind Particles	1.1 ml	2 x 1.1 ml
RNase A	10 mg	20 mg
Proteinase K	24 mg	48 mg
Protease Dissolve Buffer	3 ml	6 ml
Buffer DPS	60 ml	100 ml
Buffer ATL	15 ml	30 ml
Buffer AL	15 ml	30 ml
Buffer BD*	6 ml	15 ml
Buffer BXW1*	13 ml	44 ml
Elution Buffer	15 ml	30 ml

Storage and Stability

RNase A, Proteinase K and MagBind Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Experiment Data

This product is suitable for rapid extraction of DNA from FFPE sample, tissue, cells, blood, swabs, blood spots, semen and other clinical samples. This product uses size selection magnetic beads, which can selectively remove small sizes of DNA (100-300bp) from FFPE samples by adjusting the amount of binding solution, so as to improve the effective data volume of downstream NGS.

Introduction

MagPure Circulating DNA Rich Kit designed for purification of high quality circulating DNA (cfDNA) from cell-free body fluids (such as plasma, serum). The purified DNA is suitable for direct use in downstream applications such as PCR, real-time PCR, biochip analysis and NGS.

Details

Specifications

Features	Specifications
Main Functions	Rich small fragment cfDNA from 0.6ml serum plasma, remove DNA fragments＞500bp
Applications	qPCR, NGS, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Serum, plasma
Sample amount	0.6ml
Elution volume
Time per run

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysedand digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, Large DNA(>500bp) will be adsorbed on the surface of magBindparticles. After removal of large size, small size of DNA(<500bp) will be adsorbed on the surface ofMagPure Particle F and impurities such as proteins will be removed without adsorption. The adsorbedparticles were washed with washing solution to remove proteins and impurities, washed with ethanol toremove salts, and finally DNA

Advantages

• Economy – less than 50% of the price of Qiagen and other imported products
• Automatic – without labour

Kit Contents

Contents	1292750	12927200
Purification Times	50 preps	200 preps
MagPure Particles F	1.2 ml	4.5 ml
MagBind Particles	1.2 ml	4.5 ml
Proteinase K	24 mg	90 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer MLB	30 ml	120 ml
Buffer GDP	15 ml	60 ml
Buffer MAW1	40 ml	250 ml
Buffer MW2*	20 ml	50 ml
Elution Buffer	15 ml	60 ml

Storage and Stability

Proteinase K, MagBind Particles and MagPure Particles F should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

MagPure Circulating DNA Rich Kit designed for purification of high quality circulating DNA (cfDNA) from cell-free body fluids (such as plasma, serum). The purified DNA is suitable for direct use in downstream applications such as PCR, real-time PCR, biochip analysis and NGS.

DBCO-PEG2-DBCO is a PEG linker containing two terminal DBCO groups. The DBCO groups is commonly used for copper-free Click Chemistry reactions due to its strain promoted high energy. The hydrophilic PEG chain allows for increased water solubility. T Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

DBCO-PEG2-DBCO is a PEG linker containing two terminal DBCO groups. The DBCO groups is commonly used for copper-free Click Chemistry reactions due to its strain promoted high energy. The hydrophilic PEG chain allows for increased water solubility. T Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.