96-Well Low Elution Ring Magnetic Plate with Integrated Cushion Base
Facebook
X
Pinterest
Email
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
Detail
Designed for those labs wishing to separate magnetic beads into rings.
The Permagen ring magnet low elution plate with integrated cushion base plate was designed for use in automation applications where volumes as low as 5 µL are required. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added an angled frame around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets during automation while the cushion assist compensates for labware inconsistencies.
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
Free-circulating nucleic acids, such as tumor-specific extracellular nucleic acid fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments, <1000bp(Nucleic Acid). The HiPure Circulating Nucleic acid Micro Kit enables efficient purification of these circulating nucleic acids from human plasma, serum, or urine. Samples can be either fresh or frozen (provided that they have not been frozen and thawed more than once). Free-circulating cell-free DNA, RNA or viral nucleic acids are eluted in Nuclease Free Water, ready for use in amplification reactions or storage at -30 to -15°C. Purified nucleic acids are free of proteins, nucleases, and other impurities.
Details
Specifications
Features
Specifications
Main Functions
Isolation circulating DNA from 0.6ml plasma,serum, body fluids
Applications
qPCR, liquid or solid chip analysis, hybridization and SNP detection, etc.
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Serum, plasma and other cell-free fluid samples
Sample amount
0.6ml
Elution volume
≥30μl
Time per run
≤40 minutes
Liquid carrying volume per column
800μl
Binding yield of column
100μg
Principle
This product is based onsilica column purification. The sample is lysed and digested with lysate andprotease, DNA is released into the lysate. Transfer to an adsorption plate andfilter column. Nucleic acid is adsorbed on the membrane, while protein is notadsorbed and is removed with filtration. After washing proteins and otherimpurities, Nucleic acid was finally eluted with low-salt buffer.
Advantages
High yield – most optimal process, free DNA (>50bp) can be obtained to the maximum extent
High concentration – low elution volume, ensuring high nucleic acid concentration
High purity – low alcohol binding method, completely removing inhibitor and protein pollution
High recovery – DNA can be recoveredat the level of PG by silica gel column purification
Kit Contents
Contents
D318002
D318003
Purification Times
50 Preps
250 Preps
Buffer ACL
40 ml
200 ml
Buffer DCW1
22 ml
110 ml
Buffer DCW2*
20 ml
2 x 50 ml
Proteinase K
34 mg
180 mg
Protease Dissolve Buffer
1.8 ml
10 ml
Carrier RNA
110 μg
310 μg
Nuclease Free Water
10 ml
30 ml
HiPure CFDNA Mini Columns
50
250
2 ml Collection Tubes
100
5 x 100
Storage and Stability
Proteinase K, Carrier RNAshould be stored at 2-8°C upon arrival. However, short-term storage (up to 12weeks) at room temperature (15-25°C) does not affect their performance. Theremaining kit components can be stored dry at room temperature (15-25°C) andare stable for at least 18 months under these conditions. The entire kit can bestored at 2-8°C, but in this case buffers should be redissolved before use.Make sure that all buffers are at room temperature when used.
Document
Free-circulating nucleic acids, such as tumor-specific extracellular nucleic acid fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments,
The Opentrons Heater-Shaker Module, compatible with both the OT-2 and Flex robots, provides on-deck heating and orbital shaking of microplates. The module can be heated to 95C, and can shake samples from 200 to 3000 rpm. It is compatible with a number of deep-well and 96-well plates. The Heater-Shaker can be used simultaneously with other Opentrons modules.
The Heater-Shaker GEN1 is compatible with the new Opentrons Flex Robot when paired with the Flex Heater-Shaker Caddy and Calibration Adapter. The caddy sits below the deck to enable below-deck cable routing and labware placed on modules remain closer to the deck surface. The calibration adapter is used to calibrate the location of the module. If you choose to include the Opentrons Flex Caddy and Calibration Adapter, your order will ship in 20 business days.
Document
The Opentrons Heater-Shaker Module, compatible with both the OT-2 and Flex robots, provides on-deck heating and orbital shaking of microplates. The module can be heated to 95C, and can shake samples from 200 to 3000 rpm. It is compatible with a number of deep-well and 96-well plates. The Heater-Shaker can be used simultaneously with other Opentrons modules.
The Heater-Shaker GEN1 is compatible with the new Opentrons Flex Robot when paired with the Flex Heater-Shaker Caddy and Calibration Adapter. The caddy sits below the deck to enable below-deck cable routing and labware placed on modules remain closer to the deck surface. The calibration adapter is used to calibrate the location of the module. If you choose to include the Opentrons Flex Caddy and Calibration Adapter, your order will ship in 20 business days.
N-(Propargyl-PEG2)-DBCO-PEG3-Amine, TFA salt enables formation of triazole linkage with azide-bearing compound via copper catalyzed Click Chemistry. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde), etc. The propargyl group can be linked to azide-containing biomolecules via Click Chemistry. Reagent grade, for research purpose.
Document
N-(Propargyl-PEG2)-DBCO-PEG3-Amine, TFA salt enables formation of triazole linkage with azide-bearing compound via copper catalyzed Click Chemistry. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde), etc. The propargyl group can be linked to azide-containing biomolecules via Click Chemistry. Reagent grade, for research purpose.
