Exceptional value for money Rapid detection of all clinically relevant subtypes Positive copy number standard curve for quantification Highly specific detection profile High priming efficiency Broad dynamic detection range (>6 logs) Sensitive to < 100 copies of target
Accurate controls to confirm findings
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit.
Details of the target and priming specificity are included in the individual handbooks above.
Packaged, optimised and ready to use. Expect Better Data.
Champion™ Competent Cells are chemically competent cells, which were prepared by SMOBIO to make E. coli perform excellent transformation efficiency. Standard transformation protocol is recommended for large plasmids or non-ampicillin selection. Time-saving transformation protocol is recommended for simple and rapid transformation. Champion™ Competent Cells are one of the fastest and simplest ready-to-use competent cell products in the world.
Kit contents
Champion™ Competent Cells
pUC19 Control Plasmid (5 μl, 10-4 μg/μl)
Champion™ Transformation Protocol Card
Shipping condition
Throughout the shipping process, the temperature is maintained under -70°C.
Storage and expiration
Champion™ Competent Cells must be stored between -70°C to -80°C. Subsequent freeze-thaw cycles will reduce transformation efficiency. If high efficiency is required for the experiment, do not use aliquots that have gone through several freeze-thaw cycles. The efficiency of Champion™ Competent Cells lasts for 1 year with proper storage.
Document
Champion™ Competent Cells are chemically competent cells, which were prepared by SMOBIO to make E. coli perform excellent transformation efficiency. Standard transformation protocol is recommended for large plasmids or non-ampicillin selection. Time-saving transformation protocol is recommended for simple and rapid transformation. Champion™ Competent Cells are one of the fastest and simplest ready-to-use competent cell products in the world.
[PM5100] ExcelBand™ 3-color Pre-Stained Protein Ladder, High Range (9-245 kDa), 250 μl x 2
Product Info
Document
Product Info
Description
The PM5100 3-color Pre-Stained Protein Ladder High Range is a ready-to-use three-color protein standard with 14 pre-stained proteins covering a wide range of molecular weights from 10 to 245 kDa in Tris-Glycine Buffer (9 to 235 kDa in Bis-Tris (MOPS) buffer and 10 to 235 kDa in Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5100 3-color Pre-Stained Protein Ladder High Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
Features
Ready-to-use — Premixed with a loading buffer for direct loading, no need to boil.
Three reference bands — 75 kDa (red), 40 kDa (green), and 20 kDa (blue)
Contents
Approximately 0.1~0.4 mg/ml of each protein in the buffer (20 mM Tris-phosphate (pH 7.5 at 25°C), 2% SDS, 0.2 mM DTT, 3.6 M urea, and 15% (v/v) glycerol).
Quality Control
Under suggested conditions, PM5100 ExcelBand™ 3-color Pre-Stained Protein Ladder High Range resolves 14 major bands in SDS-PAGE (Tris-Glycine, MOPS, and MES buffer) and after Western blotting to nitrocellulose membrane.
Storage
4°C for 3 months -20°C for long term storage
Document
The PM5100 3-color Pre-Stained Protein Ladder High Range is a ready-to-use three-color protein standard with 14 pre-stained proteins covering a wide range of molecular weights from 10 to 245 kDa in Tris-Glycine Buffer (9 to 235 kDa in Bis-Tris (MOPS) buffer and 10 to 235 kDa in Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5100 3-color Pre-Stained Protein Ladder High Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
Cod Uracil-DNA Glycosylase (Cod UNG) from Atlantic Cod is the only commercially available UNG enzyme that is completely and irreversibly inactivated by moderate heat treatment. The enzyme is produced in a recombinant E. coli (ung-) strain that contains a modified Cod UNG gene.
Key Features:
Heat-labile – Completely and irreversibly inactivated at 55°C
Contamination control – ideal in applications below
Use of Cod UNG makes contamination control possible in RT-PCR
Does not degrade PCR product post-PCR. This makes downstream use of the PCR product possible
High purity enzyme, tested free of contaminating nucleases
There are several commercially available Uracil-DNA glycosylases on the market today. Most of them are of bacterial origin and work well if you have no intention to further analyze the PCR products post-PCR. However, if you want to store your PCR products for downstream analysis such as cloning and sequencing, the reactivation of UNG and subsequent degradation of your PCR products are a problem with most of the commercially available UNGs. Cod UNG from ArcticZymes is completely and irreversibly inactivated by heat thus ensuring that sample integrity is maintained long-term regardless of storage conditions.
This is illustrated in figure 1, below
Figures
Properties
Recommended Protocols
1. Contamination control in PCR, qPCR and one-step RT-qPCR
Cod UNG works in all commercially available master mixes.
Be sure that you have used dUTP containing dNTP mixes in your previous PCR experiments.
Add 0.2 U Cod UNG directly to your 20 µl PCR reaction.
pre-incubate for 5 min at room temperature.
For RT-qPCR, reverse transcribe your RNA at 50-55°C.
Run your PCR.
Store your PCR product at -20°C or 4°C degrees.
2. Contamination control in RT-LAMP
Cod UNG is ideal for contamination control in RT-LAMP. One unit of Cod UNG per 30 μl reaction is sufficient for removing even high concentrations of carry-over contamination.
Ensure that you use dNTP mixes containing dUTP in your experiments.
Check that the RT-LAMP reaction is compatible with dUTP by running side-by-side reactions containing different ratios of dUTP to dUTP (100% dUTP, 90% dUTP, 80% dUTP and 0% dUTP).
Add 1 U Cod UNG directly to your 30 µl RT-LAMP reaction.
Prepare the reaction mix on ice.
Analyze your RNA at 65°C, no preincubation is necessary.
Cod Uracil-DNA Glycosylase (Cod UNG) from Atlantic Cod is the only commercially available UNG enzyme that is completely and irreversibly inactivated by moderate heat treatment. The enzyme is produced in a recombinant E. coli (ung-) strain that contains a modified Cod UNG gene.