Cell Culture Flask surface is very smooth based on precise molding technology and it gives clear view when examined with microscope.
Volume: 25mL75mL175mL225mL
Detail
Cell Culture Flask T175
Cell Culture Flask surface is very smooth based on precise molding technology and it gives clear view when examined with microscope.
Volume: 25mL75mL175mL225mL
PRODUCT FEATURES
The product is made of medical grade USP CLASS VI polymer polystyrene
The product is made under a 100,00- class dust-free manufacturing site
Two kinds of product line up are providing.
For adherent cell culture: Initial adherence and proliferative property of cells via hydrophilic surface treatment.
For suspension cell culture: The surface is resistant to cell adherence, which minimizes damage or loss of cell.
Large mouthed design makes easy operation of pipet or cell scraper. The surface of flask is uniform and smooth, hence the clear view can be obtained when microscopic observation.
The hydrophobic filter cap can prevent invasion of fungi and bacteria without water absorb.
Gamma radiation sterilization
Non Byrogenic Nase/Bnase free
Other Products
HCM095 EC-MUG Medium
Product Info
Document
Product Info
Introduction
Intended Use
For the determination of Escherichia coli in drinking water and its source water by multiple tube fermentation method.
Principle and Interpretation
MUG permits the rapid detection of Escherichia coli when the medium is observed for fluorescence using a UV light. MUG is hydrolyzed by the enzyme β-glucuronidase which is produced by E. coli to yield a fluorescent end product 4- methylumbelliferone. Trypticase provides the essential nutrients. Lactose is the fermentable carbohydrate. Sodium chloride maintains the osmotic equilibrium. The medium has a strong buffering system to control the pH in the presence of fermentative action. The bile salts inhibit gram-positive bacteria especially the Bacillus species and faecalStreptococci.
Formulation
Ingredients
/liter
Trypticase or tryptose
20 g
Bile salts No. 3
1.5 g
Lactose
5 g
K2HPO4
4 g
KH2PO4
1.5 g
NaCl
5 g
4-methylumbelliferyl-β-D-glucuronide (MUG)
50mg
pH6.9±0.2 at 25°C
Preparation
Weigh 37g of dry powder of this product, add 1L of distilled water or deionized water, stir, heat and boil until
completely dissolved, sterilize at 115℃ for 20min, cool to room temperature and set aside.
Quality Control
The following quality control strains were inoculated and cultured at 44.5℃±0.5℃ for 24h. The results are as follows:
Quality control strains
Growth
Escherichia coli ATCC25922
Blue-white fluorescence is produced under 366nm UV light
Salmonella typhimurium ATCC14028
No fluorescence under 366nm UV light
Enterococcus faecalis ATCC29212
Clear, no fluorescence
Storage and Shelf Life
2-30℃，Keep container tightly closed, avoid direct sunlight.
Use before expiry date on the label.
Precautions
1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort
2. Keep container tightly closed after using to prevent clumping.
Waste Disposal
Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.
Document
Intended Use For the determination of Escherichia coli in drinking water and its source water by multiple tube fermentation method. Principle and Interpretation MUG permits the rapid detec……
Tri(propargyl-PEG5-NHCO-ethyloxyethyl)amine is a click chemistry branched linker. The propargyl groups can react with azide-bearing molecules via copper catalyzed Click Chemistry.
Document
Tri(propargyl-PEG5-NHCO-ethyloxyethyl)amine is a click chemistry branched linker. The propargyl groups can react with azide-bearing molecules via copper catalyzed Click Chemistry.
IST-130 QuickSeal qPCR Crystal UltraTM Self Adhesive Sealing Films
Product Info
Document
Product Info
Overview
Crystal clear adhesive film which benefits from pressure activated adhesive. This seal is DMSO resistant, peelable; suitable for qPCR and other imaging techniques including crystallization.
Crystal clear seal specifically developed for optical applications, particularly qPCR
It is non sticky when removed from the packaging; this aids handling when wearing gloves
The adhesive is contained within small capsules, allowing light to pass through to ensure the optical clarity of the seal
When the seal is in position, pressure can be applied to burst the capsules, releasing a strong adhesive only where the seal touches the raised well rims of the plate – the rest of the seal area above the wells remains optically clear
For all adhesive seals, the best sealing results are achieved using our Hand Roller or KAPS 500 Auto Sealer
Document
Crystal clear adhesive film which benefits from pressure activated adhesive. This seal is DMSO resistant, peelable; suitable for qPCR and other imaging techniques including crystallization.
