Human Cytomegalovirus (HCMV) or Human betaherpesvirus 5 (HHV-5) is a member of the Family Orthoherpesviridae. HCMV belongs to the betaherpesvirinae subfamily, while other herpesviruses fall into the subfamilies of Alphaherpesvirinae (including HSV 1 and 2 and varicella) or Gammaherpesvirinae (including Epstein-Barr virus). All herpes viruses share a characteristic ability to remain latent within the body over long periods of time. While CMV can be found in numerous body fluids including urine, saliva, breast milk, blood, tears, semen, and vaginal fluids, urine samples are generally used for congenital HCMV infection screening due to high viruria observed in infected infants.
CMV TaqMan PCR Kit, 100 reactions
Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
Specific Primer and Probe mix for the pathogen/virus/viroid of interest
Primer and Probe mix
Positive and negative control to confirm the integrity of the kit reagents
CMV TaqMan PCR Probe/Primer Set and Controls, 100 reactions
Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
Nuclease-free water
Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix
For research use only and NOT intended for in vitro diagnostics.
Storage Conditions and Product Stability All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
Component
Cat. TM36350 (100 preps)
Cat. TM36310 (100 preps)
MDx TaqMan 2X PCR Master Mix
2 x 700 μL
–
CMV Primer & Probe Mix
280 μL
280 μL
CMV Positive Control
150 μL
150 μL
Nuclease-Free Water (Negative Control)
1.25 mL
1.25 mL
Product Insert
1
1
Other Products
Disulfide Biotin Alkyne
Product Info
Document
Product Info
Disulfide Biotin alkyne is an azide-activated cleavable biotin probe that allows for efficient recovery of avidin-bound protein complexes in affinity-based assays. This reagent contains a biotin moiety linked to an alkyne group through a spacer arm containing a cleavable disulfide linker. Under reducing conditions (50 mM dithiothreitol, 10 mM 2-mercaptoethanol or 1% sodium borohydride), the disulfide bonds are cleaved, releasing the biotin tag and any avidin conjugate bound to it.
Document
Disulfide Biotin alkyne is an azide-activated cleavable biotin probe that allows for efficient recovery of avidin-bound protein complexes in affinity-based assays. This reagent contains a biotin moiety linked to an alkyne group through a spacer arm containing a cleavable disulfide linker. Under reducing conditions (50 mM dithiothreitol, 10 mM 2-mercaptoethanol or 1% sodium borohydride), the disulfide bonds are cleaved, releasing the biotin tag and any avidin conjugate bound to it.
Biocolor’s Purple-Jelley assay kit is the perfect tool for accurate measurement of hyaluronic acid / Hyaluronan levels in your samples. This colorimetric assay is optimised for quantitative analysis in-vivo, tissue-derived hyaluronic acid / Hyaluronan and includes full step-by-step instructions.
Colorimetric Detection (655nm) (Endpoint)
Hyaluronic Acid: A gentle giant!
Hyaluronic acid, in its hydrated form, is a unique carbohydrate polymer, often referred to as a ‘gentle giant.’ It consists of a lengthy, flexible, non-branching chain with a repeating disaccharide pattern. This disaccharide is composed of alternating uronic acid and aminosugar units.
Why is our kit called ‘Purple-Jelley’?
Discovering the J-Aggregate Effect in Cyanine DyesIn 1936, Edwin Jelley made a fascinating observation, documented it in a letter to Nature (Nature 138, 1009 – 1010). He noted a peculiar behaviour of certain cyanine dyes, that when dissolved in 5 M NaCl, they dyes exhibited a third absorbance peak at a longer wavelength, around 650nm. In deionized water, however, they displayed only a double peak at approximately 540nm and 570nm. The 650nm peak in concentrated dye solutions resulted from the aggregation of dye molecules and was later termed a ‘J-aggregate,’ in honor of Edwin Jelley. The J-aggregate is known as a supra-molecular complex, formed by stacking individual dye molecules.
Subsequent research in the 1960s, notably by Kay et al. (J. Physical Chem. 68, 1896 – 1906), revealed that various biological polymers, including proteins, DNA, polar lipids, and glycosaminoglycans, could also induce this third absorbance peak. This phenomenon led to the development of the Purple-Jelley assay, named after the purple color of the dye reagent and Edwin Jelley himself.
An overview of the Purple-Jelley assay steps:
During the assay, hyaluronic acid is selectively purified during the assay sample preparation protocol. This is then reacted with the Purple-Jelley dye reagent, and the absorption of the characteristic third wavelength recorded. By comparison with a calibration curve the hyaluronic acid content of the sample can be measured.
Step 1. The assay protocol takes tissue samples through a sequential sample preparation protocol which involves enzymatic protein digestion, followed by precipitation and purification of GAGs, culminating in the precipitation of purified Hyaluronic acid.
Step2. The processed sample is then incubated for 10 minutes with the Purple-Jelley dye reagent, forming a coloured product which can be measured spectrophotometrically.
Step 3. The Hyaluronic acid content of unknown samples can be calculated by comparison against a calibration curve prepared using a standard comprising hyaluronic acid (supplied with the kit).
Assay range
10 – 100µg/ml
Limit of Detection
10µg/ml
Detection Method
Colorimetric Detection (655nm) (Endpoint)
Measurements per kit
100 in total (allows a maximum of 46 samples to be run in duplicate alongside a standard curve).
Suitable Samples
In-vivo: Hyaluronic acid purified from in-vivo tissues. The kit protocol involves extraction and purification of hyaluronic acid prior to reaction with the Purple-Dye reagent.
Precautions
This kit is designed for research use only. Not for use in diagnostic procedures. Kit requires access to a centrifuge, as well as a spectrophotometer/colorimeter capable of colorimetric, absorbance detection at 655nm. Specific sample preparation protocols may require customer to provide further reagents, consult assay manual for further information.
2. Hyaluronan Reference Standard (1x 5ml, 0.2mg/ml soluble Hyaluronic Acid)
3. Precipitating Reagent (2x 34ml)
4. Sodium Chloride (1x 20ml)
5. Cetylpyridinium Chloride (1x 20ml)
6. TRIS-buffered Saline (5x tablets)
7. 2ml screw-cap tubes for preparation of samples.
8. Assay kit manual
NB: Additional reagents may be required for sample preparation prior to assay. Consult manual or contact us for further details.
Document
Biocolor’s Purple-Jelley assay kit is the perfect tool for accurate measurement of hyaluronic acid / Hyaluronan levels in your samples. This colorimetric assay is optimised for quantitative analysis in-vivo, tissue-derived hyaluronic acid / Hyaluronan and includes full step-by-step instructions.
The MBG4 reagent contains a single substrate, namely 4,6-O-benzylidene-2-chloro-4-nitrophenyl-β-(31-β-D-cellotriosyl-glucoside) (BCNPBG4). The benzylidene acetal group prevents any hydrolytic action by exo-acting hydrolytic enzymes such as β-glucosidase or cellobiohydrolase.
Mixed linkage β-glucanase (endo-1,3:1,4-β-glucanase) / lichenase (EC 3.2.1.73) acts specifically to release 2-chloro-4-nitrophenol (CNP) from this substrate. The rate of release of CNP is directly related to the β-glucanase/lichenase activity in a sample. The reaction is terminated and the phenolate colour is developed on addition of Tris buffer solution (pH = 10.0).
Note that the substrate is not hydrolysed by β-glucosidase or cellobiohydrolase. The substrate can be hydrolysed by certain endo-cellulases (e.g. Trichoderma sp.) but this does not result in an increase in absorbance.
Discover more assay kits for enzyme activity measurement.
Data calculators are located in the Documents tab.
Advantages
Very cost effective
All reagents stable for > 2 years
Specific for endo-1,3:1,4-β-glucanase/lichenase
Simple, convenient, rapid assay
Well suited to automation
Malt flour standard and lichenase standard included
Document
The MBG4 reagent contains a single substrate, namely 4,6-O-benzylidene-2-chloro-4-nitrophenyl-β-(31-β-D-cellotriosyl-glucoside) (BCNPBG4). The benzylidene acetal group prevents any hydrolytic action by exo-acting hydrolytic enzymes such as β-glucosidase or cellobiohydrolase.
