Deep Well Plate Adapter for Heater-Shaker Module

OverView

ArcticZymes Proteinase is an unspecific endopeptidase originating from an Arctic marine microbial source. It has broad substrate specificity and is easy to inactivate after use.

Histones and other proteins are known to protect nucleic acids from interacting optimally with other DNA binding proteins and enzymes. ArcticZymes Proteinase is ideally suited for transforming chromatin and other dense nucleic acids to naked DNA. The enzyme is easy to heat-inactivate. This allows thermal inactivation at temperatures allowing RNA integrity as well as avoiding dissociation of dsDNA.

‍

Key Features 

• Easy to inactivate after use: 15 – 30 min at 55 – 60°C 
• Broad substrate specificity
• Active at high salt concentrations
• Compatible with downstream DNA analyses
• Available in Glycerol FREE formulation

Applications

• Lysis and releasing nucleic acid from single-cells and small tissue samples
• Optimization of DNA/RNA yields from nucleic acids when added to extraction procedures

Figures

ArcticZymes Proteinase is an unspecific endopeptidase originating from an Arctic marine microbial source. It has broad substrate specificity and is easy to inactivate after use.

Histones and other proteins are known to protect nucleic acids from interacting optimally with other DNA binding proteins and enzymes. ArcticZymes Proteinase is ideally suited for transforming chromatin and other dense nucleic acids to naked DNA. The enzyme is easy to heat-inactivate. This allows thermal inactivation at temperatures allowing RNA integrity as well as avoiding dissociation of dsDNA.

Introduction

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

The series of nucleic acid columns produced by Magen Biotech are based on carefully selected imported glass fiber membranes (GF/B, GF/D, GF/F). Columns production processes such as polypropylene injection molding materials, injection molding process, and downstream membrane packing and compression rings are strictly controlled. This is to ensure that the column has extremely high adsorption capacity and long-term stability. Compared with conventional products on the market, Magen’s columns are with varieties, and binding rate will not change when stored at room temperature for 4 years.

Details

Specifications

Features	Specifications
Recommended application	gDNA and RNA Isolation
Preservation conditions	Room temperature
Stability	Up to 4 years
Filter membrane	High quality glass fiber filter GF/B, 2 layers
Membrane aperture	1.0μm
Maximum binding yield of plasmid	30 μg
Maximum yield of alcohol mediated Binding	100 μg
Single liquid carrying capacity of column	900 μl
Minimum elution volume	80 μl
Withstand centrifugal force	4,000-5,000 x g
Centrifuge	Low speed centrifuge, Swing out Rotor, can placed a height of 6.5cm square,  (height of HiPure DNA Plate & 1.6ml Collection Plate: height, 6.2cm)

Adsorption Mechanism

Based on the negatively charged DNA skeleton, it has a high affinity for positively charged glass fibers. In high salt and ethanol solutions, DNA/RNA binds to glass fiber and interacts with hydrophilic matrix on silica through hydrogen bond. DNA/RNA is tightly bound. All pollutants can be removed by washing solution. At high salt concentration, nucleic acids selectively bind to silica gel membrane, while other pollutants, mainly proteins, are removed by membrane washing.

Ordering information

CAT.No.	Product Name	Package
C13131	HiPure gDNA Plate (2 x GF/B)with 1.6ml Collection Plate	10/Bag

Purchase Guide

Item No.	Product Name	Membrane type/number of layers	Collection tubes	Plasmid DNA binding capacity (Physical adsorption)	gDNA/RNA binding capacity (Alcohol-mediated adsorption)	Minimum Elution volume	Liquid volume capacity
C13010	HiPure DNA Nano Column	2 layers GF/F	2ml without cap	5μg	20μg	10μl	700μl
C13011	HiPure DNA Micro Column	3 layers GF/F	2ml without cap	10μg	50μg	15μl	700μl
C13100	HiPure DNA Mini Column I	2 layers GF/B	2ml without cap	15μg	100μg	30μl	700μl
C13110	HiPure DNA Mini Column II	4 layers GF/B	2ml without cap	35μg	200μg	50μl	800μl
C13111	HiPure RNA Mini Column	3 layers GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13112	HiPure Viral Mini Column	3 layers GF/F	2ml without cap	30μg	200μg	30μl	800μl
C13113	HiPure CFDNA Mini Column	3 layers GF/F,1 layer GF/B	2ml without cap	30μg	200μg	30μl	800μl
C13120	HiPure DNA Midi Column	4 layers GF/B	15ml Centrifuge tube	125μg	1mg	500μl	4ml
C13121	HiPure DNA Midi Column III	8 layers GF/B	15ml Centrifuge tube	250μg	1mg	500μl	4ml
C13122	HiPure DNA Maxi Column	4 layers GF/B	50ml Centrifuge tube	500μg	5mg	1000μl	20ml
C13123	HiPure DNA Maxi Column III	8 layers GF/B	50ml Centrifuge tube	1mg	5mg	1000μl	20ml
C13124	HiPure DNA Maxi Column C	8 layers GF/B	50ml high speed Centrifuge tube	1mg	5mg	700μl	12ml
C13130	HiPure DNA Plate	2 layers GF/F	1.6ml Plate	30μg	100μg	80μl	900μl
C13131	HiPure gDNA Plate	2 layers GF/B	1.6ml Plate	30μg	100μg	80μl	900μl

Note: GF/B pore size is for 1.0μM glass fiber membrane; GF/F pore size is for 0.7μm glass fiber membrane.

Magen’s HiPure columns are prepared by high quality glass fiber filter membrane as raw materials through membrane cutting, membrane release, ring release, ring pressing, gland, weighing and other processes. HiPure nucleic acid adsorption columns have the characteristics of long-term stability and high binding capacity. Experiments show that the highest binding capacity and binding efficiency of HiPure nucleic acid adsorption columns are basically unchanged when stored at room temperature for 4 years.

Overview

• Rapid and simple procedure
• Excellent quality and yield of DNA
• Process a broad spectrum of plant species and filamentous fungi
• Isolate total DNA including pathogen DNA without phenol 
• Available in spin column format and 96-well format for high throughput applications

These kits provide a rapid method for the isolation and purification of total DNA from a wide range of plant and fungal species. Total DNA, including genomic DNA, mitochondrial DNA and chloroplast DNA can be purified from fresh or frozen plant tissues, plant cells or fungi samples using this kit. Purified DNA samples can be used for the detection of viral pathogens, as viral DNA is isolated with the plant/fungi DNA. The purified DNA is of the highest integrity, and can be used in a number of downstream applications including PCR, qPCR, SNP, Southern blotting and sequencing.

Plant/Fungi DNA Isolation Kit (Spin Column)

Complete 10 purifications in 45 minutes. This kit offers a maximum loading volume of 650 μL per column, and a maximum binding capacity of 50 μg per column.

Plant/Fungi DNA Isolation 96-Well Kit (High Throughput)

For high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system. Complete 96 purifications in 50 minutes. This kit offers a maximum loading volume of 500 μL per well, and a maximum binding capacity of 50 μg per well.

Plant/Fungi DNA Isolation Kit (Magnetic Bead System)

The DNA is bound to the surface of the magnetic beads under optimized buffer conditions and released using a low salt buffer system. The Plant DNA Isolation Kit (Magnetic Bead System) can be easily adapted to automated magnetic bead separation instruments and work stations.

Plant/Fungi DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)

For high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.

Details

Supporting Data

Figure 1 / 7

Previous

Next

Click for expanded view

Kit Specifications – Spin Column
Column Binding Capacity	50 μg
Maximum Column Loading Volume	650 μL
Maximum Amount of Starting Material:Plant TissuesFungi (wet weight)	100 mg 100 mg
Average Yields* 50 mg Tomato Leaves 50 mg Grape Leaves 50 mg Peach Leaves 50 mg Plum Leaves 50 mg Pine Needles Botrytis cinerea (50 mg wet weight) Fusarium sp. (50 mg wet weight) Aspergillus niger (50 mg wet weight)	18 µg 10 µg 10 µg 10 µg 5 µg 1.5 µg 2 µg 4 µg
Time to Complete 10 Purifications	45 minutes

* Average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage.
 

* Average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage. 

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature, except for the RNAse which should be stored at -20°C. This kit is stable for 1 year after the date of shipment.

Select Plants and Fungi that can be used with the Plant/Fungi DNA Purification Kits

Plants	Plants (Cont’d)	Fungi
Tomato	Turnip	Aspergillus niger
Grape	Chinese Cabbage	Mucor racemosus
Peach	Radish	Cladosporium cladosporioides
Plum	Komatsuna	Fusarium oxysporum
Pine Needles	Apricot	Penicillium sp.
Raspberry	Sweet Potato	Botrytis cinerea (Botryotinia fuckeliana)
Strawberry	Hydrangea	Pichia sp.
Legumes	Fig	Rhizopus oryzae
Prosopis cineraria (Ghaf)	Turf	Alternaria tenuissima
Sorghum grass	Cherry	Fusarium sp.
Tobacco	Saintpaulia
Arabidopsis	Lotus
Lichen	Carrot
Corn seed	Hansen
Sunflower seed	Pistachio
Olive seed
Soybean seed

Component	Cat. 26200 (50 preps)	Cat. 26250 (250 preps)	Cat. 26900 (192 preps)	Cat. 58200 (50 preps)	Cat. 62400 (192 preps)
Lysis Buffer L	30 mL	1 x 30 mL 2 x 60 mL	2 x 60 mL	60 mL	2 x 60 mL
Binding Buffer I	7 mL	1 x 7 mL 1 x 25 mL	25 mL	7 mL	25 mL
Solution WN	18 mL	1 x 18 mL 1 x 55 mL	55 mL	18 mL	55 mL
Wash Solution A	38 mL	2 x 38 mL	2 x 38 mL	–	–
Elution Buffer B	15 mL	30 mL	30 mL	8 mL	30 mL
RNAse A	1 vial (80 μL)	5 vials (5 x 80 μL)	1 vial	1 vial	1 vial
Magnetic Bead Suspension	–	–	–	4 x 1.1 mL	2 x 8.5 mL
Filter Columns	50	250	–	–	–
Spin Columns	50	250	–	–	–
Collection Tubes	100	500	–	–	–
96-Well Plate	–	–	2	–	2
96-Well Collection Plate	–	–	2	–	–
Adhesive Tape	–	–	4	–	2
Elution Tubes (1.7 mL)	50	250	–	50	–
96-Well Elution Plate	–	–	2	–	2
Product Insert	1	1	1	1	1