DL8M Large Capacity Refrigerated Centrifuge 

Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes

Accommodates any common PCR strips or individual PCR tubes

Tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet 

SKU #

MSR812

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down front side
• Rubber feet to help prevent slippage
• Stable design
• Angled tube holes which allow the tubes to come close to magnets
• Each tube has its own magnet

Compatibility

• Up to 24 Individual PCR tubes
• Up to two, 8-strip PCR tube strips
• Up to two, 12-strip PCR strips
• Any Magnetic Beads

Volumes

Maximum  – .2 mL 

Minimum  – 30 µL 

Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes

The Flex caddy allows the Heater-Shaker GEN1 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Heater-Shaker. Caddies and calibration adapters are specific to the type of module.

Note: This item does not include the Heater-Shaker. The module is available with or without the Flex Caddy and Calibration tool: Heater-Shaker Module GEN1

The Flex caddy allows the Heater-Shaker GEN1 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Heater-Shaker. Caddies and calibration adapters are specific to the type of module.

Note: This item does not include the Heater-Shaker. The module is available with or without the Flex Caddy and Calibration tool: Heater-Shaker Module GEN1

Overview

• Purification and enrichment of intact exosomes from plasma, serum, urine, cell culture media and saliva in less than 30 minutes.
• Versatile sample input ranging from 50 µL to 10 mL
  • Plasma/Serum Exosome Purification Mini Kit (50 µL – 1 mL Plasma/Serum)
  • Plasma/Serum Exosome Purification Midi Kit (1 mL – 4 mL Plasma/Serum)
  • Plasma/Serum Exosome Purification Maxi Kit (4 mL – 10 mL Plasma/Serum)
• Exosome purification is based on Norgen’s proprietary resin separating matrix through exosomes’ surface proteins.
• No precipitation reagents, overnight incubation, protease or coagulant treatments required
• No time-consuming ultracentrifugation, filtration or special syringes required
• Purify intact exosomes with a size ranging from 40-200 nm depending on sample input type
• Purified exosomes are compatible with functional studies.
• Purified exosomes are free from any RNA-binding proteins
• Purified exosomes are compatible with NanoSight® or Electron Microscopy for assessing the approximate exosome size range and concentration.
• Exosomal RNA can be extracted from the purified exosomes using Norgen’s Exosomal RNA Purification technology or any other RNA extraction method.

The Plasma/Serum Exosome Purification Kits provide a fast, reliable and convenient method to purify and enrich for intact exosomes from different plasma/serum sample volumes ranging from 50 µL to 10 mL. These kits also allow for the purification of intact extracellular vesicles (EVs) from different plasma/serum sample volumes, and these EVs are ready for any downstream application. The purification is based on Norgen’s proprietary resin.

These kits provide a clear advantage over other available methods since they do not require any special instrumentation, ultracentrifugation, precipitation reagents or any protease treatments. More importantly, the purified exosomes will not be contaminated with any other RNA-binding proteins that may contaminate your exosomal RNA, which is essential if studying exosomal transcripts.

NanoSight® Analysis

Exosomes enriched with Norgen’s Plasma/Serum Exosome Purification Kits can be analyzed using NanoSight® for assessing the approximate exosome size range and concentration

Exosomal RNA Analysis

To purify exosomes and isolate exosomal RNA, choose the Plasma/serum Exosome Purification and RNA isolation kits. The protocol is divided into 2 parts and an aliquot of purified exosomes can be taken for applications like NTA/TEM etc. before processing them for RNA isolation. Or you can use the Exosomal RNA Isolation Kit if you’ve already purified exosomes using a Norgen kit or another method. . Exosomal RNA isolation is based on Norgen’s proprietary resin without the need for phenol extractions or carrier RNA. This RNA is ideal for gene expression analysis using RT-qPCR, microarray, or NGS and for biomarker discovery.

Details

Supporting Data

Figure 1 / 4

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All buffers should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.

Important Note
This kit is suitable for the purification of exosomes from fresh or frozen serum or plasma prepared from blood collected on either EDTA or Citrate. Plasma samples prepared from blood collected on heparin should not be used as heparin can significantly interfere with many downstream applications such as RT-PCR.