Enterovirus Species

Overview

• Isolate genomic DNA from all types of bacteria (both Gram-positive and Gram-negative)
• Rapid and convenient spin column protocol
• 96-well format available for high throughput
• High yield, high quality DNA for sensitive downstream applications including sequencing, PCR, qPCR and more

This kit is designed for the rapid spin column preparation of genomic DNA from 2 x 10⁹ viable bacterial cells (between 0.5 and 1.0 mL of culture). This kit can be used for both Gram-negative and Gram-positive bacteria including Escherichia coli and Bacillus cereus. Purified genomic DNA is of an excellent quality and yield, and is fully compatible with restriction enzyme digestions, sequencing, PCR, qPCR and more. Also available in 96-well format for high throughput applications.

Details

Supporting Data

Figure 1 / 2

Previous

Next

Click for expanded view

Kit Specifications (Spin Columns)
Input	2 x 109 bacterial cells
Column Binding Capacity	25 µg
Average Yield*	Up to 20 µg
Time to Complete 10 Purifications	1 hour

* Yield will vary depending on the type of sample processed

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 2 years after the date of shipment when stored at room temperature.

Component	Cat. 17900 (50 preps)	Cat. 17950 (192 preps)
Resuspension Solution A	20 mL	60 mL
Lysis Buffer P	18 mL	60 mL
Solution BX	28 mL	110 mL
Wash Solution A	18 mL	2 x 38 mL
Elution Buffer B	30 mL	2 x 30 mL
Proteinase K	12 mg	50 mg
Spin Columns	50	–
96-Well Plate	–	2
Adhesive Tape	–	4
Collection Plate	–	2
Collection Tubes	50	–
Elution Tubes (1.7 mL)	50	–
Elution Plate	–	2
Product Insert	1	1

Overview

• AAV Purification from any input – cell fraction or media fraction
• High AAV recovery, up to 90%
• No specialized equipment needed
• Purification from a variety of AAV serotypes (including AAV6 and AAV9)
• Yields highly active AAV for in vivo and in vitro experiments
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

Recombinant adeno-associated virus (AAV) vectors are highly promising tools for both in vitro and in vivo gene transfer. Norgen’s AAV Purification Kits provide fast and simple procedures for concentrating and purifying AAV vectors from cell lysate and cell culture media. Purification is based on precipitation onto Norgen Biotek’s proprietary resin. Contaminating cellular debris is largely removed from the sample via a centrifugation step, while contaminating DNA and RNA is reduced using enzymatic digestion. AAV vector purified in this manner is highly active for use in in vitro and in vivo transduction experiments.

AAV Purification Kit

Norgen’s AAV Purification Kit contains sufficient materials for 15 preparations (33.5 mL per prep of supernatant (SN) or a total of 500 mL of supernatant input). Approximately 1 mL of cell pellet can be purified per prep, up to a maximum of 15 mL of cell pellet in total for the entire kit. Up to 33X sample concentration.

AAV Purification Mini Kit

Each spin column is able to concentrate and purify AAV from 0.5-8 mL of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (200 µL). Preparation time for 4 samples is 1.5 hours, with 45 minutes of hands-on time.

AAV Purification Midi Kit

Each spin column is able to concentrate and purify AAV from 8 mL up to 45 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1 mL). The kit may be used to purify up to 8 x 25 mL or 4 x 45 mL of samples using the included columns. Preparation time for 4 samples is approximately 2 to 2.5 hours, with 1.5 hours of hands on time.

AAV Purification Maxi Kit (Slurry Format)

Each spin column is able to concentrate and purify AAV from 45 mL to 90 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 200X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1-10 mL) using the optional concentration step. The kit may be used to purify up to 1 x 900 mL samples or 10 x 45-90 mL samples using the included columns. Preparation time for 1 x 900 mL sample is approximately 2.5 to 3.5 hours, with an optional concentration step requiring an additional 30 min.

Details

Supporting Data

Figure 1 / 10

Previous

Next

Click for expanded view

Kit Specifications
Resin Binding Capacity (total per kit)	At least 5 x 1010 AAV particles as determined by qPCR
AAV Vector Serotype	AAV6, AAV9 and others
Input Type	Cells, media
Input Volume (AAV supernatant)	1 – 33.5 mL SN per prep (500 mL SN in total)
Input Volume (AAV cell pellet)	1 mL cell pellet per prep (15 mL in total)
Time to Complete Purifications	2.5 to 4.5 hours with 1 hour hands on time
In vivo transduction	Yes

Storage Conditions and Product Stability

HL-SAN Nuclease should be stored at -20°C upon arrival. Elution Buffer O should be stored tightly capped at 4°C upon arrival. All other solutions should be kept tightly sealed and stored at room temperature. Once opened, the solutions should be stored at 4°C. This kit is stable for 2 years after the date of shipment.

Component	Cat. 66100 (15 preps)	Cat. 63200 (20 preps)	Cat. 63300 (4-8 preps)	Cat. 63250 (1-10 preps)
Lysis Buffer S	5.5 mL	5.5 mL	5.5 mL	20 mL
DNAse I	–	2 x 25 uL	2 x 25 uL	210 μL
RNAse A	–	60 μL	60 μL	240 μL
HL-SAN Nuclease	102 μL	–	–	–
Binding Buffer A	20 mL	4 mL	4 mL	2 x 8 mL
Purification Solution C	60 mL	–	–	–
Purification Solution D	130 mL	–	–	–
Wash Solution C	2 x 130 mL	60 mL	60 mL	3 x 60 mL
Slurry E	12.5 mL	–	–	2 x 14.5 mL
Elution Buffer O	66 mL	8.5 mL	8.5 mL	66 mL
Protein Neutralizer	4 mL	4 mL	4 mL	4 mL
Spin Columns	–	20	–	–
Mini Spin Columns	–	20	–	–
Midi Spin Columns (grey contents) with Collection Tubes	–	–	8	10
Midi Spin Columns (white contents) with Collection Tubes	–	–	8	–
Maxi Spin Columns (grey contents) with Collection Tubes	–	–	–	10
Maxi Spin Columns (white contents) with Collection Tubes	–	–	–	10
Collection Tubes	–	40	–	–
Elution tubes (1.7 mL)	50	20	–	–
Midi Elution tubes (15 mL)	–	–	8	10
Maxi Elution tubes (50 mL)	–	–	–	10
Product Insert	1	1	1	1

Description

Our SNPsig® kits use our own proprietary genotyping method to enable the identification of SARS-CoV-2 variants of concern. These products can be used on any real-time PCR machine using familiar protocols, whilst resulting in exceptional genotyping data.

Positive control templates for wild-type and variants are supplied in every kit to make data interpretation simple.

Our SNPsig® technology provides an alternative to sequencing as well as S gene target failure (SGTF) that enables scientists to analyse and monitor these specific genomic mutations.  Our kits can provide a pivotal role in screening for SARS-CoV-2 variants for the purpose of genomic surveillance and studies.

For the detection of the SARS-CoV-2 (20I/501Y.V1 UK)
Rapid detection of specific detection profiles
High priming efficiency
Sensitive to < 100 copies of target Positive copy number standard curve for quantification Accurate controls to confirm findings 96 reactions, includes master mix