Total workflow solution
All reagents and components provided from start to finish
Rapid protocol with fewer handling steps
For use with dry swabs
Viral inactivation; Preparation, Amplification, Diagnosis
Total chemistry optimisation
Low shipping costs with ambient shipping
Includes our genesig® Real-Time PCR Coronavirus COVID-19 (CE IVD)
The genesig® Real-Time PCR COVID-19 (CE) is CE-IVD marked and intended for in vitro diagnostic use in Europe.
PLEASE NOTE: This is a Professional Use Only product that requires a trained operator in a controlled laboratory environment. It is NOT a lateral flow or a Point of Care device designed to be used by the general public.
Permagen’s 32-tube PCR Separation rack features all of the same aspects of our MSR812 rack above for easy protocol transition for labs wishing to scale up to four PCR strips at a time, or up to 32 individual PCR tubes.
Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads
MSR402
Maximum – .2 mL
Minimum – 30 µL
Permagen’s 32-tube PCR Separation rack features all of the same aspects of our MSR812 rack above for easy protocol transition for labs wishing to scale up to four PCR strips at a time, or up to 32 individual PCR tubes.
K-FRGLQR
SKU: 700004283
1100 assays (microplate) / 1100 assays (auto-analyser)
| Content: | 1100 assays (microplate) / 1100 assays (auto-analyser) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 6 months under recommended storage conditions |
| Analyte: | D-Fructose, D-Glucose |
| Assay Format: | Microplate, Auto-analyser |
| Detection Method: | Absorbance |
| Wavelength (nm): | 340 |
| Signal Response: | Increase |
| Linear Range: | 0.4 to 20 µg of D-glucose plus D-fructose per assay |
| Limit of Detection: | 133 mg/L |
| Reaction Time (min): | ~ 13 min |
| Application examples: | Wine, beer, fruit juices, soft drinks, milk, jam, honey, dietetic foods, bread, bakery products, candies, desserts, confectionery, ice-cream, fruit and vegetables, condiments, tobacco, cosmetics, pharmaceuticals, paper and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Methods based on this principle have been accepted by AOAC, EN, NEN, NF, DIN, GOST, OIV, IFU, AIJN, MEBAK and IOCCC |
This product has been discontinued, you may be interested in the following replacement product K-FGLQR; 700007621)
The D-Fructose/D-Glucose (Liquid Ready) test kit is a rapid, reliable and accurate method for the specific measurement and analysis of D-fructose and D-glucose in wine, beverages, foodstuffs and other materials. Supplied as a “ready to use” liquid stable formulation that is suitable for auto-analyser and microplate formats.
Find more of our monosaccharide and oligosaccharide assay kits.
Advantages
This product has been discontinued, you may be interested in the following replacement product K-FGLQR; 700007621)
The kit includes HS Dye, HS Dilution Buffer, and two DNA Standards. The assay is accurate for DNA concentrations from 10 pg/µL to 100 ng/µL, and is highly selective for double-stranded DNA over RNA.
Features
DNA selectivity and sensitivity of the HS kit. A series of input DNA (20, 40, 60, 80, 100, and 120 ng) was used with or without the contamination of RNA.
Comparison of dsDNA HS kits. The performance of the BioDynami dsDNA HS kit is nearly identical to that of Thermo Fisher’s Qubit dsDNA HS kit.
Cat.# 40042 dsDNA Quantification HS Kit, 100 assays and 500 assays
