Suspend 29.5g in 1L of purified water. Heat with frequent agitation to dissolve the powder. Sterilize at 121℃ for 15 minutes
Storage:
Keep the container tightly closed. Store in a cool, dry place, away from bright light. The storage period is 3 years.
Specification: 500g/bottle
Related products
Other Products
96-Well Universal Bar Magnetic Plate
Product Info
Document
Product Info
Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR the MSPU650 has you covered
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic bead
Permagen’s most universal bar magnet plate. From PCR plates to almost any microplate including deep well, flat bottom, pyramid bottom, round bottom, full-skirt PCR, and 1/2 skirt PCR the MSPU650 has you covered
HiPure FFPE RNA Kit supplies a simple and rapid RNA extraction for Formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 30 minutes (not including digestion time). RNA can be directly used for downstream applications such as RT-PCR, Northern blot, vitro translation and other experiments.
Details
Specifications
Features
Specifications
Main Functions
Isolation total RNA from FFPE tissue and section samples
Applications
RT-PCR, quantitative RT-PCR, Northern hybridization, Poly A purification, nucleic acid protection and in vitro translation
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
FFPE tissue sample
Sample amount
6mg
Yield
20μg
Elution volume
≥20μl
Time per run
≤60 minutes
Liquid carrying volume per column
800µl
Binding yield of column
100µg
This product is based on silica column purification. Remove paraffin by Buffer DPS. Sample lysis with proteinase K digestion requires only 15 minutes. After lysis, samples are incubated at 80ºC for 15 minutes. Transfer to an adsorption column and RNA is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, RNA was finally eluted with low-salt buffer.
Advantages
High quality – high purity total RNA can be directly used in various sensitive downstream applications
Fast – several samples can be extracted in 60 minutes by column method
Safe – no phenol chloroform extraction required
Sensitive – RNA can be recovered at the level of PG
Kit Contents
Contents
R414302
D414303
Purification Times
50 Preps
250 Preps
HiPure RNA Micro Columns
50
250
2ml Collection Tubes
50
250
Buffer DPS
60 ml
250 ml
Buffer FRL
15 ml
60 ml
Buffer RLC
15 ml
60 ml
Buffer RWC*
10 ml
50 ml
Buffer RW2*
20 ml
2 x 50 ml
Protease Dissolve Buffer
1.8 ml
10 ml
Proteinase K
24 mg
120 mg
RNase Free Water
10 ml
20 ml
Storage and Stability
Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.
Document
HiPure FFPE RNA Kit supplies a simple and rapid RNA extraction for Formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 30 minutes (not including digestion time). RNA can be directly used for downstream applications such as RT-PCR, Northern blot, vitro translation and other experiments.
Features of the resDNASEQ CHO Residual DNA Quantitation kit include:
Simpler and Rapid
Only three steps will be need for Sample Preparation and All components of the Sample Preparation Kit can be stored at room temperature.
Only one Reagent for qPCR;
Only 1.5 hours will be needed for the whole test.
Accurate
Perfect amplification curve, good amplification efficiency and good precision.
Highly sensitive quantitation using proven TaqMan™ real-time qPCR technology.
Limit of Detection (LOD): 0.01 fg/μL; Limit of Quantification (LOQ): 0.3 fg/μL.
The recovery rate of different concentration samples in the linear range is between 70% and 130%.
Kit Performance
Fig 1. Only three steps will be need for Sample Preparation and only 20 minitutes will be taken for Sample Preparation.
Fig 2. Seven concentration samples of 0.3fg/μL, 3fg/μL, 30fg/μL, 300fg/μL, 3pg/μL, 30pg/μL, 300pg/μL were detected. CV of each concentration was < 30%, Regression coefficient associated with standard solutions was 0.99992, and amplification efficiency was 100.370%.
Fig 3. Five concentration samples of 0.1 fg/μL, 0.3 fg/μL, 0.5 fg/μL, 1 fg/μL and 3 fg/μL were detected, and 10 multiple wells were detected for each concentration. The CV of concentrati on values of samples with 0.3 fg/μL and above concentrations were less than 30%.
Fig 4. DNA recovery can be determined by including samples spiked with known DNA amounts which are prepared from the corresponding DNA standards. Typically, the range for this value varies from 70% to 130%.
Fig 5. Only one Reagent for qPCR MIX.
Document
Note: Price not include shipment & duty, contact us to get full quote. The resDNASEQ CHO Residual DNA Quantitation kit is designed for the quantification of residual DNA from CHO, in cell lines which are used for production of biopharmaceutical products. The Ducky Bio residual DNA CHO Assay, based on proven real-time qPCR technology, makes testing of residual DNA from the Chinese hamster ovary (CHO) cell line rapid, specifc. The PCR-based assay is sensitive and specific for DNA from the CHO cell line and not subject to detection of human or environmental DNA that might be introduced during sample handling. The kit was developed to meet the sensitivity requirements defined by WHO (10 ng CHO DNA per therapeutic dose).
