Solvent resistant heat sealing foil which is peelable. This seal is suitable for low and room temperature compound storage.
Detail
Overview
Solvent resistant heat sealing foil which is peelable. This seal is suitable for low and room temperature compound storage.
Our PeelASeal DMSO Foil is a DMSO resistant seal compatible with polypropylene and forming an excellent seal to cyclic olefin copolymer (COC) plates
The solvent resistance of this seal enables its use for low and room temperature compound storage in Dimethyl Sulfoxide (DMSO) and organic solvents
100% DMSO can be stored at room temperature for 12 months without deterioration of the seal
It forms a weld seal to polyethylene plates and cannot be peeled off
Access is by piercing using a blade or a needle
This seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
Also available in multiple roll formats compatible with specified automated heat sealers, such as our Wasp or Chameleon XT
Other Products
SD-25/SD-25C Vacuum Centrifugal Concentrator
Product Info
Document
Product Info
SD-25/SD-25C Vacuum Centrifugal Concentrator
Ambient temperature type/Refrigerated type
Technical Parameter
Temperature range
Room Temperature~+80℃
-10℃~+80℃
Temperature Accuracy
士1℃
Max.Speed
2500rpm
Max.Capacity
6x100ml
Timer
0~99h59min
Vacuum control range
0.1~1000mbar
Main unit withstands vacuum levels
0.01mbar
Noise
≤55dBA
≤65dBA
Voltage
0.7kw
1.3kw
Power supply
220v,50Hz
Dimension(L×W×Hmm)
360*448*304mm
440*653*420mm
Adapter Rotor
Rotor Type
Rotor Volume
Rotor Type
Rotor Volume
Angle Rotor
42×1.5/2ml
Angle Rotor
8×50ml
Angle Rotor
108×1.5/2ml
Angle Rotor
6×100ml
Angle Rotor
48×5ml
Angle Rotor
16*20ml Sample vial
Angle Rotor
30×10ml
Angle Rotor
16*5ml+8*4ml+8*3ml
Angle Rotor
24×15ml
Microplate Rotor
2×96well
Document
Key features：
1. High-definition LCD touch screen, simultaneously displaying operational parameters: speed, temperature, vacuum, and running time.
2. Delayed start: after reaching a fixed speed, Start the vacuum pump to effectively prevent sample mixing.
3. Fully automatic vacuum control system, vacuum setting range0.1~1000mbar, Control accuracy0.1mbar.
4. 1.5/2ml Rotor stacking for simultaneous use; rotor replacement without tools.
5. Programmable with temperature and pressure settings; capable of storing 36 programs
6. Compatible with various rotor heads; transparent glass window for easy observation.
7. Magnetic drive: maintenance-free, non-contact drive, fully sealed.
8. Safety in use: inductive electric self-suction door lock ensures the centrifugal concentrator can only start when the door cover is fully closed and locked.
9. Can be used in conjunction with freeze-drying systems
Model:
SD-25/SD-25C
[DL2000] ExcelDye™ 6X DNA Loading Dye, Green, 5 ml x 2
Product Info
Document
Product Info
Description
The ExcelDye™ 6× DNA Loading Dye (Green) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains two dyes (Xylene cyanol FF and Orange G) for tracking the DNA migration. The Xylene cyanol FF and Orange G migrate at approximately 800 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.
Composition
0.03% Xylene cyanol FF
0.15% Orange G
10 mM Tris-HCl (pH 8.0)
60% glycerol
60 mM EDTA
Storage
4°C for 12 months -20°C for 36 months
Document
The ExcelDye™ 6× DNA Loading Dye (Green) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains two dyes (Xylene cyanol FF and Orange G) for tracking the DNA migration. The Xylene cyanol FF and Orange G migrate at approximately 800 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
Key Features
User-friendly gel cassette:
Numbered and framed wells for sample loading
With cassette opener for easy use
Enhanced gel performance:
Enhanced band sharpness
Better resolution of small proteins
Stable for shipping at ambient temperature
Easy compatibility:
Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
Compatible with most popular protein electrophoresis systems
Storage and stability
Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.
Do not freeze Q-PAGE™ Precast Gels Remove tape and comb before electrophoresis.
Keep Q-PAGE™ Precast Gels flat during storage.
Document
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
