IST-129 QuickSeal Foil PCR UltraTM Self Adhesive Sealing Film
Facebook
X
Pinterest
Email
Strong adhesive aluminium PCR foil seal which is pierceable, peelable and suitable for high temperature applications.
Detail
Overview
Strong adhesive aluminium PCR foil seal which is pierceable, peelable and suitable for high temperature applications.
This aluminium foil seal has a strong acrylic adhesive which produces a seal of high integrity
It was developed for PCR and other high temperature applications due to its effectiveness in preventing sample evaporation
The QuickSeal Foil PCR Ultra Seal is pierceable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum
It also has perforated end tabs for easy application and removal by peeling
For all adhesive seals, the best sealing results are achieved using our Hand Roller or KAPS 500 Auto Sealer
Other Products
MiniSizer 50 bp DNA Ladder
Product Info
Document
Product Info
Overview
Ready-to-use
Quantitative
Highly Stable
Precise
Fourteen discrete fragments ranging from 25 bp to 650 bp in 50 bp increments
Double intensity reference bands at 200 bp and 400 bp
The Norgen MiniSizer 50 bp DNA Ladder is prepared to ensure quality and batch-to-batch consistency. This Ladder contains fourteen discrete fragments ranging from 25 bp to 650 bp in 50 bp increments with double intensity reference bands at 200 bp and 400 bp. The MiniSizer is ideal for PCR product size confirmation.
Contents:
1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).
MiniSizer 50 bp DNA Ladder (Cat# 11200) – 100 loads
Ladder Properties: • Fourteen discrete bands, ranging from 50 bp to 650 bp • Higher intensity bands at 200 bp and 400 bp for easy reference
Fragment
Size (bp)
Mass (ng)
1
650
61
2
600
46
3
550
36
4
500
30
5
450
35
6
400
85
7
350
27
8
300
25
9
250
16
10
200
54
11
150
33
12
100
21
13
50
17
14
25
14
Recommended Use:
Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.
Storage:
Stable at room temperature. For longer term storage, -20°C is recommended.
This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.
This Kit is designed to purify genomic DNA and total RNA simultaneously from a single biological sample. Lysate is first passed through a DNA spin column to selectively isolate DNA and then through an RNA column to selectively isolate RNA. Pure DNA and RNA are purified from the entire sample, in contrast to other procedures where either the biological sample or the purified total nucleic acids is divided into two before being processed separately. The kit is compatible with small amounts of a wide range of animal cells and tissues.
Details
Specifications
Features
Specifications
Main Functions
Co-isolation DNA and RNA(not include miRNA) from a single sample (cells, soft tissue, plant sample)
Applications
RT-PCR, cDNA synthesis, PCR andsecond-generation sequencing, etc.
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Soft tissue samples (viscera, excluding skin andmuscle), cultured cells and common plant tissues
Sample amount
Soft Tissue: < 30mg, Cell: <1 x 107, Plant: <100mg
Yield
DNA: 1 – 20 μg, RNA: 3 – 100 μg
Principle
The Kits are designed to purify both genomic DNA and total RNA from the same cellor tissue sample. Samples are first lysed and homogenized. The lysate is passed through a DNA Mini column and bind DNA. Ethanol is added to the flow-through and the sample is applied to an RNA column. DNA/RNA binds to the membrane and contaminants are washed away. High-quality RNA is eluted in as little as 30µl water using the Kit. High-quality DNA is eluted in as little as 50µl water using the Kit.
Advantages
High quality – high purity total RNA / DNA can be directly used in a variety of downstream applications
Fast – column method can complete the extraction of several samples in 30 minutes
Safe – no phenol chloroform extraction required
Simultaneous extraction- simultaneously isolate DNA and RNA from one sample
Kit Contents
Contents
R511102
R511103
Purification Times
50 Preps
250 Preps
HiPure DNA Mini Columns
50
250
HiPure RNA Mini Columns
50
250
2ml Collection Tubes
100
2 x 250
Buffer RLC
50 ml
200 ml
Buffer DW1
30 ml
150 ml
Buffer RW1
30 ml
150 ml
Buffer RW2*
20 ml
2 x 50 ml
RNase Free Water
10 ml
30 ml
Buffer AE
10 ml
50 ml
Storage and Stability
HiPure DNA/RNA Kit can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions.
Document
This Kit is designed to purify genomic DNA and total RNA simultaneously from a single biological sample. Lysate is first passed through a DNA spin column to selectively isolate DNA and then through an RNA column to selectively isolate RNA. Pure DNA and RNA are purified from the entire sample, in contrast to other procedures where either the biological sample or the purified total nucleic acids is divided into two before being processed separately. The kit is compatible with small amounts of a wide range of animal cells and tissues.
[DL3000] ExcelDye™ 6X DNA Loading Dye, Blue, 5 ml x 2
Product Info
Document
Product Info
Description
The ExcelDye™ 6× DNA Loading Dye (Blue) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains two dyes (Xylene cyanol FF and Bromophenol blue) for tracking the DNA migration. The Xylene cyanol FF and Bromophenol blue migrate at approximately 800 bp and 150 bp on a standard 2% TAE agarose gel respectively (4,000 bp and 500 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.
Composition
0.03% Xylene cyanol FF
0.03% Bromophenol blue
10 mM Tris-HCl (pH 8.0)
60% glycerol
60 mM EDTA
Storage
4°C for 12 months -20°C for 36 months
Document
The ExcelDye™ 6× DNA Loading Dye (Blue) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains two dyes (Xylene cyanol FF and Bromophenol blue) for tracking the DNA migration. The Xylene cyanol FF and Bromophenol blue migrate at approximately 800 bp and 150 bp on a standard 2% TAE agarose gel respectively (4,000 bp and 500 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.