PC-Biotin-PEG4-PEG4-alkyne is useful for introducing a biotin moiety to azide-containing biomolecules using Cu(I)-catalyzed Click Chemistry. The extended hydrophilic spacer arm provides better solubility to the labeled molecules in aqueous media. Captured biomolecules can be efficiently photoreleased using near-UV, low intensity lamp (e.g. 365 nm lamp at 1-5 mW/cm2). Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

PC-Biotin-PEG4-PEG4-alkyne is useful for introducing a biotin moiety to azide-containing biomolecules using Cu(I)-catalyzed Click Chemistry. The extended hydrophilic spacer arm provides better solubility to the labeled molecules in aqueous media. Captured biomolecules can be efficiently photoreleased using near-UV, low intensity lamp (e.g. 365 nm lamp at 1-5 mW/cm2). Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

Overview

• All-in-one solution for inclusion body protein isolation and purification
• Fast and convenient spin column protocol
• Complete kit with Cell Lysis Reagent, Inclusion Body Solubilization Reagent, buffers and spin columns to purify proteins
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits provide everything required to isolate and purify inclusion body proteins from induced bacterial cultures. First a proprietary Cell Lysis Reagent is used to selectively lyse the cells and release inclusion bodies in their solid form. Next, inclusion bodies are dissolved and their contents released using the provided IB Solubilization Reagent. Inclusion body proteins are then further purified using spin columns for rapid and convenient buffer exchange and desalting. This kit provides a convenient way to screen recombinants prior to scaling up.

ProteoSpin™ Inclusion Body Protein Isolation Micro Kit

The process is efficient and streamlined and can process up to 12 samples in only 60 minutes. Each spin column is able to recover up to 50 µg of acidic or basic proteins. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

ProteoSpin™ Inclusion Body Protein Isolation Maxi Kit

The procedure is efficient and streamlined and can process up to 4 samples in approximately 2 hours. Each spin column is able to recover up to 12 mg of acidic or basic proteins from 100 mL of induced bacterial culture. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

About Inclusion Bodies

Bacteria are widely used for the expression of different proteins. However, 70-80% of the proteins expressed in bacteria by recombinant techniques are typically contained in insoluble inclusion bodies (i.e., protein aggregates). The protein of interest found in these subcellular structures is often inactive, due to incorrect folding. The production rate of recombinant proteins stored in inclusion bodies is invariably higher than those synthesized as soluble proteins. The reason behind this is thought to be the resistance of insoluble proteins to proteolysis by cellular enzymes. In addition, separation of insoluble recombinant proteins in inclusion bodies is considerably easier than that of soluble proteins. These factors have been the major influences favoring scale-up of high-value proteins using bacterial fermentation for example. Procedures for the purification of the expressed proteins from inclusion bodies are often labour-intensive, time-consuming and not cost-effective. This kit provides the essential reagents for cell disruption, inclusion body solubilization and purification using spin column chromatography – all optimized to work together thereby simplifying the process and saving a tremendous amount of time and cost.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications
Maximum Culture Volume	1.5 mL
Yield from 1.5 mL	Up to 50 μg
Minimum Elution Volume	30 μL
Time to Process 12 Samples	60 minutes

Storage Conditions

The Cell Lysis Reagent and IB Solubilization Reagent should be stored at 4°C upon receipt of this kit. All other solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. Once opened, the solutions should be stored at 4°C when not in use except for the pH Binding Buffers (Acidic and Basic). Some precipitation will occur with 4°C storage. This precipitation should be dissolved with slight heating to room temperature before using.

Component	Cat. 10300 (Micro – 25 preps)	Cat. 17700 (Maxi – 4 preps)
Wash Solution C	30 mL	130 mL
Wash Solution N	30 mL	130 mL
Binding BUffer A	4 mL	20 mL
Binding Buffer N	4 mL	20 mL
Elution Buffer C	8 mL	2 x 30 mL
Protein Neutralizer	4 mL	4 mL
Cell Lysis Reagent	15 mL	110 mL
IB Solubilization Reagent	2 mL	50 mL
Syringes, 1cc, slip tip	25	–
Needles (Bev, 20G x 1 inch)	25	–
Syringes, 10 mL, Luer-Lok™ Tip	–	4
Needles (18G x 1.5 inch)	–	4
Micro Spin Columns	25	–
Maxi Spin Columns (filled with SiC) inserted into 50 mL collection tubes	–	4
Collection Tubes	25	–
Elution Tubes (1.7 mL)	25	–
Elution Tubes (50 mL)	–	4
Product Insert	1	1

Introduction

MagPure Stool DNA Kit is specially designed for high throughput DNA extraction from stool samples. It can get high purity microbial DNA from stool samples (≤200mg). This kit is based on magnetic beads purification and unique inhibiting factors adsorption technology, no phenol-chloroform extraction or alcohol precipitation. It can adsorb humic acid and other inhibiting factors in the solution efficiently. DNA can be directly used for downstream applications such as PCR, Viral DNA testing, bacterial DNA testing, etc.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 100-150mg stool samples
Applications	PCR, southern blot and enzyme digestion, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Stool
Sample amount	100-150 mg
Elution volume
Time per run

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Lysozyme. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

• Fast – several samples can be extracted in 60 minutes (after digestion)
• High purity – unique adsorbent can completely remove inhibitory factors
• High recovery – DNA can be recovered at the level of PG

Kit Contents

Contents	D636401	D636402	D636404
Purification Times	48 Preps	96 Preps	400 Preps
MagPure Particles N	1.7 ml	3.4 ml	14 ml
2ml Bead Tubes	48	96	400
RNase A	10 mg	20 mg	75 mg
Proteinase K	24 mg	48 mg	180 mg
Protease Dissolve Buffer	3 ml	5 ml	20 ml
Buffer ATL	60 ml	110 ml	300 ml
PVP-10	1.2 g	2.2 g	6 g
Buffer PCI	50 ml	100 ml	300 ml
Buffer MLE	30 ml	60 ml	180 ml
Buffer GW1*	22 ml	44 ml	132 ml
Elution Buffer	20 ml	20 ml	60 ml

Storage and Stability

MagPure Particles, RNase A and Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

MagPure Stool DNA Kit is specially designed for high throughput DNA extraction from stool samples. It can get high purity microbial DNA from stool samples (≤200mg). This kit is based on magnetic beads purification and unique inhibiting factors adsorption technology, no phenol-chloroform extraction or alcohol precipitation. It can adsorb humic acid and other inhibiting factors in the solution efficiently. DNA can be directly used for downstream applications such as PCR, Viral DNA testing, bacterial DNA testing, etc.