L-Malic Acid Assay Kit (MegaQuant™ Format)

Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved.  Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSRLV08

Features

• Two racks built into one
• 50 µL – 0.2 mL volumes on one side
• 5 µL – 50 µL volumes on opposite side
• Sides are conveniently marked with volume recommendations
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down front side
• Rubber feet to help prevent slippage on both sides
• Stable, solid aluminum design
• Angled tube holes which allow the tubes to come close to magnets

Compatibility

• Up to 16 Individual PCR tubes per side
• Up to two, 8-strip PCR tube strips per side
• Any Magnetic Beads

Volumes

Maximum  – .2 mL 

Minimum  – 5 µL 

Permagen’s Dual Volume 0.2 mL PCR Strip separator uses the same magnet configuration as our MSR812 rack above, however, when using the opposite side, the magnets are positioned towards the bottom of the tubes allowing low elution’s to be achieved. Angled tube holes allow clean area at the front of the well for clean, fast aspiration without the concern of disturbing bead pellets Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

Name of Product

PCR Universal Module

Catalog Number

MGUP 1

Short Info

The PCR Universal Module consists of lateral flow dipsticks for the detection of Genomic Amplificates (beer germs, juice germs)

Method/Platform

Lateral Flow Dipstick

Range/Assay Sensivity

Detection of amplification products from Milenia GenLine PCR Modules

Test Principle

The technological basis for the GenLine tests is the polymerase chain reaction (PCR) combined with lateral flow Tests.

Brief Instructions

1. The PCR reagents and the samples are prepared.
2. After the addition of the sample to the PCR reagents, the PCR is started.
3. The resulting PCR products are detected by a simple lateral flow test Strip

Storage

2°C to 8°C

Components

Lateral flow dipsticks

Name of Product
PCR Universal Module
Catalog Number
MGUP 1
Short Info
The PCR Universal Module consists of lateral flow dipsticks for the detection of Genomic Amplificates (beer germs, juice germs)

Method/Platform
Lateral Flow Dipstick
Range/Assay Sensivity
Detection of amplification products from Milenia GenLine PCR Modules
Test Principle
The technological basis for the GenLine tests is the polymerase chain reaction (PCR) combined with lateral flow Tests.

Description 

The PM5100 3-color Pre-Stained Protein Ladder High Range is a ready-to-use three-color protein standard with 14 pre-stained proteins covering a wide range of molecular weights from 10 to 245 kDa in Tris-Glycine Buffer (9 to 235 kDa in Bis-Tris (MOPS) buffer and 10 to 235 kDa in Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5100 3-color Pre-Stained Protein Ladder High Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins. 

Features

• Ready-to-use — Premixed with a loading buffer for direct loading, no need to boil.
• Three reference bands — 75 kDa (red), 40 kDa (green), and 20 kDa (blue)

Contents

Approximately 0.1~0.4 mg/ml of each protein in the buffer (20 mM Tris-phosphate (pH 7.5 at 25°C), 2% SDS, 0.2 mM DTT, 3.6 M urea, and 15% (v/v) glycerol). 

Quality Control 

Under suggested conditions, PM5100 ExcelBand™ 3-color Pre-Stained Protein Ladder High Range resolves 14 major bands in SDS-PAGE (Tris-Glycine, MOPS, and MES buffer) and after Western blotting to nitrocellulose membrane. 

Storage

4°C for 3 months
-20°C for long term storage

The PM5100 3-color Pre-Stained Protein Ladder High Range is a ready-to-use three-color protein standard with 14 pre-stained proteins covering a wide range of molecular weights from 10 to 245 kDa in Tris-Glycine Buffer (9 to 235 kDa in Bis-Tris (MOPS) buffer and 10 to 235 kDa in Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5100 3-color Pre-Stained Protein Ladder High Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.