Twenty 4.5X60mm strips of each combination of nitrocellulose (4X), wicking material (2X), and sample pad (3X) A total of 480 strips are provided 100 cassettes 125mL of buffer
Detail
Twenty 4.5X60mm strips of each combination of nitrocellulose (4X), wicking material (2X), and sample pad (3X)
Blank lateral flow strips are the perfect companion during the development and feasibility testing of a lateral flow device. IN THE BEGINNING, the capture and test line reagents can be spotted onto the nitrocellulose portion of the blank strips at different concentrations, volumes and buffer conditions. This enables the user to determine the optimal conditions for subsequent spraying and enables the user to verify the test and controls will respond according to expectations before scaling up the process.
These blank strips are compatible with all of our colloidal gold products AND:
Lateral flow cassettes: C02022
Streptavidin CdSe/ZnS Quantum Dots For Lateral Flow: AU2043
Streptavidin Europium Chelate Microspheres For Lateral Flow: AU2050
Streptavidin Colloidal Gold For Lateral Flow: AU2017
Goat Anti-Rabbit (GAR) Conjugated Colloidal Gold for Lateral Flow (1mL of 10OD)
Product image shows functional testing of Goat Anti Rabbit 40nm colloidal gold on a lateral flow test.
Our products are produced in a state-of-the-art manufacturing facility that enable rapid turnaround times while ensuring batch to batch consistency and reliability.
Document
Goat Anti-Rabbit (GAR) Conjugated Colloidal Gold for Lateral Flow (1mL of 10OD)
Product image shows functional testing of Goat Anti Rabbit 40nm colloidal gold on a lateral flow test.
Our products are produced in a state-of-the-art manufacturing facility that enable rapid turnaround times while ensuring batch to batch consistency and reliability.
Our 384-well PCR plates have a rigid fully-skirted frame which remains stable during thermal cycling.
About
Our 384-well plate has a rigid, fully-skirted frame which remains stable during thermal cycling. The rigidity of the plate lends itself to automated and high-throughput PCR environments where robotic handling maybe in use.
The 2-component design reduces the risk of evaporation due to a poor sealing, commonly seen with 1-component PCR plates. 100% virgin medical grade polypropylene is used for the 384 wells, with a maximum capacity of 45 µL Certified free from DNase, RNase, nucleases and human gDNA.
For the selective isolation and culture of Listeria monocytogenes.
Principle and Interpretation
Peptone provides the carbon and nitrogen sources necessary for growth; yeast extract powder and starch provide carbon and nitrogen sources, vitamins and growth factors; sodium chloride can maintain a balanced osmotic pressure; glucose provides a carbon source; Listeria hydrolyzes esculin and reacts with iron ions to form black 6,7-dihydroxycoumarin; mannitol is a fermentable sugar, and phenol red is a pH indicator; lithium chloride and other antibiotics can inhibit Gram-negative bacteria and most Gram-positive bacteria; agar is the coagulant of the culture medium.
Formulation
Ingredients
/liter
Peptone
23 g
Starch
1 g
NaCl
5 g
Columbia agar
13 g
Mannitol
10 g
Ferric ammonium citrate
0.5 g
Esculin (aesculin)
0.8 g
Dextrose (glucose)
0.5 g
Lithium chloride
15.0 g
Phenol red
0.08 g
pH7.2±0.2 at 25°C
Preparation
Weigh 68.9g of dry powder of this product, add 1L of distilled water or deionized water, stir, heat and boil until completely dissolved, divide into Erlenmeyer bottles, sterilize at 121℃ for 15min, cool to room temperature and set aside. Heat to dissolve agar before use, cool to 50℃, add 1 tube of supporting reagent (SR0140) per 100mL of basal culture medium, shake well and pour into sterilized culture dish.
Quality Control
The following quality control strains were inoculated and cultured at 35-37℃ for 24h. The results are as follows:
Quality control strains
Growth
Listeria monocytogenes ATCC19115
Gray-green colonies with a black depression in the center and black surrounding
Enterococcus faecalis ATCC29212
–
Escherichia coli ATCC25922
–
Storage and Shelf Life
2-30℃，Keep container tightly closed, avoid direct sunlight.
Use before expiry date on the label.
Precautions
1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort
2. Keep container tightly closed after using to prevent clumping.
Waste Disposal
Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.
Document
Intended Use For the selective isolation and culture of Listeria monocytogenes. Principle and Interpretation Peptone provides the carbon and nitrogen sources necessary for growth; yeast ex……
