m-PEG5-propargyl

Overview

• Detection kits for Legionella sp.
• Lyophilized format designed for room temperature shipping
• Available in TaqMan format for analysis

Norgen’s Legionella sp. TaqMan PCR Lyophilized Kit is designed for the detection of Legionella sp. specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Norgen’s Legionella sp. TaqMan Lyophilized Probe/Primer and Control Set is designed for the detection of Legionella sp. specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability

• All kit components should be stored at -20°C upon arrival.
• Once reconstituted, repeated thawing and freezing (>2 times) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
• Each kit is provided with 4 tubes of 2X PCR Master Mix and each tube is enough to run 25 reactions. It is not necessary to reconstitute all Master Mix tubes at once. The Master Mix tubes can be reconstituted as and when needed.
• All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

Component	Cat. TM64450L (100 preps)	Cat. TM64410L (100 preps)
MDx TaqMan 2X PCR Master Mix (Lyo)	4 x 350 μL	–
Legionella sp. Primer & Probe Mix (Lyo)	280 μL	280 μL
Legionella sp. Positive Control (Lyo)	150 μL	150 μL
Nuclease-Free Water (Negative Control)	3 x 1.25 mL	1 x 1.25 mL
Product Insert	1	1

Description 

Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels. 

Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems. 

Key Features

• User-friendly gel cassette:
  • Numbered and framed wells for sample loading
  • Labeled warning sign and green tape as reminder
• Enhanced gel performance: 
  • Enhanced band sharpness
  • Better resolution of small proteins 
  • Stable for shipping at ambient temperature
• Easy compatibility: 
  • Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
  • Compatible with most popular protein electrophoresis systems 

Storage and stability

Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.

Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis. 

Keep Q-PAGE™ Precast Gels flat during storage.

Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.

Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.

Description

Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.

The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit.

Details of the target and priming specificity are included in the individual handbooks above.

Packaged, optimised and ready to use. Expect Better Data.

Exceptional value for money
Rapid detection of all clinically relevant subtypes
Positive copy number standard curve for quantification
Highly specific detection profile
High priming efficiency
Broad dynamic detection range (>6 logs)
Sensitive to < 100 copies of target Accurate controls to confirm findings