The Opentrons Flex Deck Expansion Set (4 count) allows you to utilize up to 4 more positions on the Opentrons Flex worktable. The expansions slots are installed to the right of the worktable, acting as positions A4, B4, C4, and D4 and accepting plates, tube racks, and other labware that support SBS dimensions.
The deck expansion slots are necessary for all high-throughput workflows and can be paired with the Opentrons Flex Waste Chute to maximize the throughput capabilities of the Opentrons Flex.
Detail
The Opentrons Flex Deck Expansion Set (4 count) allows you to utilize up to 4 more positions on the Opentrons Flex worktable. The expansions slots are installed to the right of the worktable, acting as positions A4, B4, C4, and D4 and accepting plates, tube racks, and other labware that support SBS dimensions.
The deck expansion slots are necessary for all high-throughput workflows and can be paired with the Opentrons Flex Waste Chute to maximize the throughput capabilities of the Opentrons Flex.
Other Products
CloneSizer 100 bp DNA Ladder
Product Info
Document
Product Info
Overview
Ready-to-use
Quantitative
Highly Stable
Precise
Fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments
Higher intensity reference bands at 500 bp and 1000 bp
2686 bp (pUC19) reference band for easy clone identification
The CloneSizer 100 bp DNA Ladder is prepared to ensure quality and batch-to-batch consistency. Our CloneSizer contains fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments, double intensity reference bands at 500 and 1000 bp and an additional 2686 bp (pUC19) reference band for easy clone identification.
Contents: 1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).
CloneSizer 100 bp DNA Ladder (Cat# 11600) – 100 loads
Ladder Properties:
Fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments
Higher intensity reference bands at 500 bp and 1000 bp
2686 bp (pUC19) reference band for easy clone identification
Fragment
Size (bp)
Mass (ng)
1
2686
72
2
2000
53
3
1500
41
4
1200
42
5
1000
56
6
900
30
7
800
29
8
700
25
9
600
25
10
500
52
11
400
19
12
300
20
13
200
19
14
100
17
Recommended Use:
Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.
Storage:
Stable at room temperature. For longer term storage, -20°C is recommended.
This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.
MutL Homolog 1 (MLH1) is a protein involved in the mismatch-repair pathway. This protein is commonly associated with hereditary non-polyposis colorectal cancer, as the MLH1 gene is frequently mutated in patients with this cancer. Studies have shown MLH1 to be deficient in a high percentage of patients with microsatellite instability, as well as endometrial and ovarian cancers. Use of Anti-MLH1 is optimized when paired in an IHC panel with MSH6, MSH2, and PMS2. Anti-MLH1 is useful in the detection of MLH1 in a number of normal and neoplastic tissues, and for identifying a loss of MLH1 in tumors that are microsatellite-unstable.
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
Key Features
User-friendly gel cassette:
Numbered and framed wells for sample loading
Labeled warning sign and green tape as reminder
Enhanced gel performance:
Enhanced gel electrophoresis speed
Better band separation
Stable for shipping at ambient temperature
Easy compatibility:
Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
Compatible with most popular protein electrophoresis systems
Storage and stability
Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.
Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis.
Keep Q-PAGE™ Precast Gels flat during storage.
Document
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
