Overview

• Ready-to-use
• Quantitative
• Highly Stable
• Precise
• Fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments
• Higher intensity reference bands at 500 bp and 1000 bp
• 2686 bp (pUC19) reference band for easy clone identification

The CloneSizer 100 bp DNA Ladder is prepared to ensure quality and batch-to-batch consistency. Our CloneSizer contains fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments, double intensity reference bands at 500 and 1000 bp and an additional 2686 bp (pUC19) reference band for easy clone identification.

Contents:
1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).

Details

Supporting Data

Figure 1 / 1

Previous

Next

Click for expanded view

CloneSizer 100 bp DNA Ladder (Cat# 11600) – 100 loads

Ladder Properties:

• Fourteen discrete fragments ranging from 100 bp to 2000 bp in 100 bp increments
• Higher intensity reference bands at 500 bp and 1000 bp
• 2686 bp (pUC19) reference band for easy clone identification

Fragment	Size (bp)	Mass (ng)
1	2686	72
2	2000	53
3	1500	41
4	1200	42
5	1000	56
6	900	30
7	800	29
8	700	25
9	600	25
10	500	52
11	400	19
12	300	20
13	200	19
14	100	17

Recommended Use:

Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.

Storage: 

Stable at room temperature. For longer term storage, -20°C is recommended.

This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.

Introduction

This product is suitable for extracting total viral nucleic acid from cell-free/low-content cell biological samples such as body fluids, serums, plasma, soaking solutions, tissue homogenate supernatant, and culture supernatant. The Purified DNA/RNA is used for RT-PCR and PCR detection.

Details

Specifications

Features	Specifications
Main Functions	IVD5412 precast kit for kingfisher Flex
Applications	RT-PCR，PCR，NGS
Products	Viral DNA / RNA, body cell DNA / RNA
Purification method	Polydisperse magnetic beads
Purification technology	Magnetic beads technolog
Process method	Manual or automatic
Sample type
Sample amount	200μl
Adaptive instrument	Nucleic acid extractor, pipetting workstation

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA/RNA is released into the lysate. After adding magnetic particles and binding solution, DNA/RNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA/RNA was eluted by Nuclease Free Water.

Advantages

Kit Contents

Cat.No	Reagent	IVD5412-F-96
PK/Carrier RNA		1x 24 mg/Bottle
Protease Dissolve Buffer Blue		1.8 ml/Bottle
Tip		1
Sample Plate (DW Plate)	500µl Buffer MLB/Well	1
Wash 1 Plate (DW Plate)	500µl Buffer MW1/Well	1
Wash 2 Plate (DW Plate)	500µl Buffer CW/Well	1
Beads Plate (DW Plate)	500µl CW & 20µl MPN/Well	1
Elute Plate (KF Plate)	90µl NFW/Well	1

Storage and Stability

This kit is shipped and stored at room temperature and is valid for 12 months.

This product is suitable for extracting total viral nucleic acid from cell-free/low-content cell biological samples such as body fluids, serums, plasma, soaking solutions, tissue homogenate supernatant, and culture supernatant. The Purified DNA/RNA is used for RT-PCR and PCR detection.

t-Boc-N-Amido-PEG9-propargyl is an alkyne linker that can be used in Click Chemistry reactions with azides to yield a stable triazole linkage; copper is required for catalyzation. Under mild acidic conditions, the Boc group can be removed to form a free amine. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

t-Boc-N-Amido-PEG9-propargyl is an alkyne linker that can be used in Click Chemistry reactions with azides to yield a stable triazole linkage; copper is required for catalyzation. Under mild acidic conditions, the Boc group can be removed to form a free amine. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.