Eleven discrete fragments ranging from 50 bp to 1000 bp
Higher intensity reference band at 500 bp
The Norgen PCR Ranger 100 bp DNA Ladder is prepared to ensure quality and batch-to-batch consistency. Our PCR Ranger DNA Ladder contains eleven discrete fragments ranging from 50 bp to 1000 bp with a higher intensity reference band at 500 bp. This Ladder is ideal for assessment of a range of PCR product sizes.
Contents 1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).
PCR Ranger 100 bp DNA Ladder (Cat# 11300) – 100 loads
Ladder Properties: • Eleven discrete bands, ranging from 50 bp to 1,000 bp • Higher intensity band at 500 bp for easy reference
Fragment
Size (bp)
Mass (ng)
1
1000
91
2
900
66
3
800
61
4
700
51
5
600
43
6
500
70
7
400
28
8
300
23
9
200
30
10
100
22
11
50
15
Recommended Use: Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.
Storage: Stable at room temperature. For longer term storage, -20°C is recommended.
This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.
Other Products
NGS FFPE DNA Library Prep Kit (illumina and MGI Platforms)
Product Info
Document
Product Info
The NGS FFPE DNA Library Prep Kit (illumina and MGI Platforms) was developed for the construction of high quality FFPE DNA libraries using 10 ng to 400 ng of input DNA isolated from formalin-fixed, paraffin-embedded (FFPE) samples. The DNA damage caused by fixation makes it difficult to construct high quality libraries. Our kit has been optimized to repair damaged DNA in the reactions. Multiplexing of the NGS FFPE DNA Library is possible.
NGS FFPE DNA Library Prep Kit Workflow
FFPE samples are a great resource for biomedical research. However, the methods for fixation and condition of storage significantly damage the DNA in the samples. Thus, the extraction of high quality DNA from FFPE samples is often a challenge. Low yield and low quality of FFPE DNA usually are common because of the limited tissue material and the DNA degradation.
As a result, it is usually difficult to construct high quality NGS libraries from low amount and low quality of FFPE DNA. In order to address this issue, we have developed the NGS FFPE DNA Library Prep Kit to make high quality libraries from the low input of FFPE DNA samples.
Three index types are available for the NGS FFPE DNA Library Prep Kit of the illumina platform:
Non-index (Cat.# 30035): Libraries do not have index.
Index (Cat.# 30037): Each of our index primers contains a unique barcode DNA (6 bases long) that can be used to identify individual library. Multiplexing of libraries is up to 48 samples. Index information can be downloaded here.
Unique dual index (Cat.# 30039): FFPE DNA library multiplexing is possible with 96 samples based on the unique dual indexing system. Our unique Four–Base Difference Index System allows us to make indexes that have at least 4 bases different from each other in the 8-base index sequence. Our unique dual indexing primers can effectively remove NGS errors including index hopping, de-multiplexing errors, index cross-contamination, mis-assignments etc. The unique dual index primer set includes 96 pre-mixed unique pairs of i5 and i7 index primers. Index information can be downloaded here.
Indexes are available for the MGI platform kits (Cat.# 34037).
Kit advantages:
Fast and simple protocol
Making libraries in just 1.5 hours
10 minutes of hands-on time
Easy procedure
Ready-to-use master mix to reduce the tedious mixing
Less reaction components to simplify the reaction setup
Less magnetic beads needed for the purification steps: saving more than 50% of the expensive beads
Low input FFPE DNA: From 10 ng to 400 ng
Comparison of library conversion efficiency under the same condition. Input DNA amount is 25 ng.
Comparison of library yield under the same condition. Input DNA amount is 25 ng.
Document
The NGS FFPE DNA Library Prep Kit (illumina and MGI Platforms) was developed for the construction of high quality FFPE DNA libraries using 10 ng to 400 ng of input DNA isolated from formalin-fixed, paraffin-embedded (FFPE) samples. The DNA damage caused by fixation makes it difficult to construct high quality libraries. Our kit has been optimized to repair damaged DNA in the reactions. Multiplexing of the NGS FFPE DNA Library is possible.
Short term stability: 2-8oC, Long term stability: See individual component labels
Analyte:
D-Fructose, D-Glucose
Assay Format:
Spectrophotometer, Auto-analyzer
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Increase
Linear Range:
2.5 to 150 µg of D-glucose plus D-fructose per assay
Limit of Detection:
6 mg/L
Limit of Quantification:
16 mg/L
Reproducibility (%):
< 5%
Reaction Time (min):
~ 15 min for Total Sugars
The D-Fructose/D-Glucose (Liquid Ready™) assay kit is a method for the specific measurement and analysis of D-Fructose/D-Glucose in wine, beverages, foodstuffs and other materials. Measurements can be performed separately or combined. Supplied as a 2-reagent format “ready to use” liquid stable formulation that is suitable for manual and auto-analyzer formats with a simple, reliable and accurate method.
”Ready to use” liquid stable formulation – no reconstitution needed
PVP incorporated to prevent tannin inhibition
Standard included
Suitable for manual and auto-analyzer formats
Quick Reference Guide available
Mega-Calc™ software tool is available for hassle-free raw data processing
Document
The D-Fructose/D-Glucose (Liquid Ready™) assay kit is a method for the specific measurement and analysis of D-Fructose/D-Glucose in wine, beverages, foodstuffs and other materials. Measurements can be performed separately or combined. Supplied as a 2-reagent format “ready to use” liquid stable formulation that is suitable for manual and auto-analyzer formats with a simple, reliable and accurate method.
50 assays of each (manual) / 500 assays of each (microplate)
Content:
50 assays of each (manual) / 500 assays of each (microplate)
Shipping Temperature:
Ambient
Storage Temperature:
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
Ammonia, L-Glutamine
Assay Format:
Spectrophotometer, Microplate
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Decrease
Linear Range:
1 to 40 µg of L-glutamine per assay
Limit of Detection:
0.54 mg/L (L-glutamine), 0.06 mg/L (ammonia)
Reaction Time (min):
~ 10 min
Application examples:
Cell culture media and cultures, dietary supplements, vegetables and other materials (e.g. biological samples, etc.).
Method recognition:
Novel method
This product has been discontinued.
The L-Glutamine/Ammonia (Rapid) test kit is a novel method for the specific, convenient, cost effective and rapid measurement and analysis of L-glutamine and ammonia in culture media/supernatants and other materials.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
Extended cofactors stability. Dissolved cofactors stable for > 1 year at 4oC.
Very rapid reaction due to use of high activity glutaminase and uninhibited glutamate dehydrogense
All enzymes supplied as stabilised suspensions
Only enzymatic kit available
Very cost effective
All reagents stable for > 2 years after preparation
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Document
The L-Glutamine/Ammonia (Rapid) test kit is a novel method for the specific, convenient, cost effective and rapid measurement and analysis of L-glutamine and ammonia in culture media/supernatants and other materials.
