[PM5000] ExcelBand™ 3-color Pre-Stained Protein Ladder, Regular Range (9-180 kDa), 250 μl x 2
Facebook
X
Pinterest
Email
The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is a ready-to-use three-color protein standard with 13 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine Buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and 10 to 170 kDa Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
Detail
Description
The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is a ready-to-use three-color protein standard with 13 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine Buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and 10 to 170 kDa Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
Features
Ready-to-use — Premixed with a loading buffer for direct loading, no need to boil.
Three reference bands — 75 kDa (red), 40 kDa (green), and 20 kDa (blue)
Contents
Approximately 0.1~0.4 mg/ml of each protein in the buffer (20 mM Tris-phosphate (pH 7.5 at 25°C), 2% SDS, 0.2 mM DTT, 3.6 M urea, and 15% (v/v) glycerol).
Quality Control
Under suggested conditions, PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range resolves 13 major bands in SDS-PAGE (Tris-Glycine, MOPS, and MES buffer) and after Western blotting to nitrocellulose membrane.
Storage
4°C for 3 months -20°C for long term storage
Other Products
TL24 series biological microscope
Product Info
Document
Product Info
The TL 24 series of biological Microscope
TL 24 series biological microscope is equipped with 195 achromatic objective and large field eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, etc. It can be widely used in biology, medicine, industry, agriculture and other fields, and is an ideal instrument for medical, teaching, scientific research and other units
Details of TL24 series biological microscope
* Optical system: equipped with limited far flat field optical system, complete machine mildew prevention design and large field eyepiece, with beautiful appearance, clear imaging, broad vision, convenient operation and other characteristics, can be widely used in biology, medicine, industry, agriculture and other fields, is the ideal instrument for medical, teaching, scientific research and other units
* Observation head device: the cylinder can rotate 360 degrees, the displacement of the center of the mirror is 0.06mm; 30 tilting; the hinge double observation (the left and right systems are 2.0% different; the lens end position is 0.1mm at zero vision) and the third party connection port, pupil distance adjustment range of 55-75mm, fixed observation tube head is internal hexagon screw or select portable screw.
* Eyepiece configuration: random eyepiece WF10X / 18mm; the magnification accuracy of eyepiece shall not exceed ± 2%. There is a card slot on the eyepiece tube to lock and position the eyepiece to prevent falling. Binocular vision is adjustable, making binocular observation easier;
* Loading platform:triangular rail XY composite mechanical moving loading platform; 0.005 lateral to 5N horizontal force, corrosion resistance and wear resistance. Rectangular, size 110X120mm, stroke 7030mm, minimum read value 0.1 mm.
Specification
Specification configuration
TL24A
Binocular observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm
TL24B
Three-eye observation head, 45° tilt, 360 degrees can be rotated, pupil distance can be adjusted, adjustment range 50-75mm.
TL24M
Three-eye viewing head, equipped with 5 million pixel imaging system CMOS camera
TL24P
Three-eye viewing head, equipped with 10.1 inch integrated flat panel display
Eyepiece
Wide-angle eyepiece WF10X,field of view 18mm,optional WF16X,WF25X
Converter
Quadruple Revolving Converter
0bjective
195mm achromatic objective,4X,10X,40X,100X(oil)
Condenser
ABBE N.A.1.25Condenser with Iris Diaphragm &Filter
Stage
Double Layer Mechanical Stage,Size110mmx120mm,Moving Range :70mmx30mm
Focusing
Crude motion, micromotion and coaxial focal adjustment system with a minimum focal range of 0.02mm Coarse and Fine Focusing
Light source
1W LED,with Rechargeable Battery,Type C USB cable
Attachments
Dust bag,Type C power cord
Document
TL 24 series biological microscope is equipped with 195 achromatic objective and large field eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, etc. It can be widely used in biology, medicine, industry, agriculture and other fields, and is an ideal instrument for medical, teaching, scientific research and other units
The Bisulfite Sequencing Library Prep Kit (illumina platform) was developed for construction of NGS libraries using bisulfite treated DNA (50 ng – 500 ng) as input. DNA methylation is an epigenetic mechanism known to play a critical role in gene regulation and genomic imprinting by blocking transcription factor access to promoters and enhancers. Bisulfite sequencing is a popular technique in biomedical research based on C to T conversion under the treatment of sodium bisulfite.
Recently, NGS became a powerful tool to identify the DNA methylation status at the whole genome level with single-base resolution. However, it is well known that bisulfite treatment of the NGS libraries causes tremendous damage to the libraries.
Bisulfite-Seq kit comparison
In the case of the regular bisulfite seq library preparation (library prep before bisulfite conversion), the DNA shearing equipment and the expensive methylated adaptors are required. In addition, the subsequent bisulfite conversion causes tremendous DNA damage to the constructed libraries.
BioDynami has developed a unique library prep technology to solve the problems. The technology uses bisulfite treated DNA as input to avoid the significant library loss caused by bisulfite conversion. Furthermore, DNA shearing step and expensive methylated adaptors are not required with our kit. The DNA polymerase in the kit has high-fidelity amplification ability and uracil tolerance which is ideal for amplification of bisulfite sequencing libraries. The final library is strand specific.
Bisulfite Sequencing Library Prep Kit Workflow
Three index types are available for the kit:
Non-index (Cat.# 30091): Libraries do not have index.
Index (Cat.# 30092): Each primer contains a unique barcode sequence of 6 bases to identify the individual library. Library multiplexing capacity is up to 48 samples. Index information can be downloaded here.
Unique dual index (Cat.# 30093): The multiplexing of bisulfite sequencing library is up to 96 samples with unique dual indexes. We used a Four-Base Difference Index System to generate indexes that have at least 4 bases different from each other in the 8-base index. The index primers remove NGS errors including index cross-contamination, index hopping, reads mis-assignment etc. Index information can be downloaded here.
Kit advantages
Easy and Quick protocol
Easy: Hands-on time only 10 minutes
Quick: Total protocol time around 1.5 hours
Simple workflow: Less steps
Directional library
Save magnetic beads more than 50%
Guaranteed high Bisulfite sequencing library conversion efficiency
Bisulfite treated DNA as input: From 50 ng to 500 ng
Document
The Bisulfite Sequencing Library Prep Kit (illumina platform) was developed for construction of NGS libraries using bisulfite treated DNA (50 ng – 500 ng) as input. DNA methylation is an epigenetic mechanism known to play a critical role in gene regulation and genomic imprinting by blocking transcription factor access to promoters and enhancers. Bisulfite sequencing is a popular technique in biomedical research based on C to T conversion under the treatment of sodium bisulfite.
Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.
Details
Specifications
Features
Specifications
Concentration
100 mg/ml
Appearance
Suspension of black particles
Surface functional group
Si-OH, Silanol
Dispersibility
Polydisperse Amorphous
Particle size
1.5-5 μm
Preservation conditions
Room Temperature, valid for up to 2 years.It is recommended to store in 2-8°C to prevent microbial growth.
Magnetic response speed
15-30 seconds
Settling velocity
>5 minutes
High salt mediated binding
>2M guanidine isothiocyanate, DNA recovery up to 80%
Alcohol mediated binding
2M guanidine hydrochloride / isopropanol (30%), and the recovery of DNA / RNA was as high as 85%
PEG8000 mediated binding
The recovery of DNA/RNA was up to 85%
DNase/RNase
Not detected
DNA residue
<1 ppm
Recommended application
Plasmid extraction, gel DNA recovery, genomic DNA extraction and RNA extraction.
Principle
Highsalt mediated binding: in the solution containing 2-4M guanidine isothiocyanate, Magpure particles can selectively recover DNA molecules, and impurities such as protein polysaccharides are not adsorbed.
Alcohol mediated binding: in the solution containing guanidine salt and alcohol (>25%), Magpure particles can selectively recover DNA/RNA molecules, and proteins and other impurities are not adsorbed.
After biological samples are treated with digestive solution or lysis Buffer, DNA/RNA is released from cells, organelles and protein complexes (ribosomes and nucleosomes) into reagents. After Magpure particles and binding solution are added, DNA/RNA is adsorbed to the surface of Magpure particles to form DNA/RNA bead complex. Under the action of the magnetic field, the magnetic beads are separated and collected, and the impurities such as protein are removed with the waste liquid. After two or three steps of further cleaning, the DNA/RNA magnetic bead complex is resuspended in sterilized water or TE buffer, and the DNA/RNA falls off from the surface of the magnetic beads, so as to achieve the purpose of purification.
gDNA/RNA Isolation from Blood, Tissue, Plant, Swab, Spots, Stool, Soil and etc.Viral DNA/RNA IsolationAgarose Gel DNA Purification
DNA/RNA Isolation from low nucleic acid content samplesPlasmid IsolationDNA/RNA Clean Up
Circulating DNA IsolationViral Nucleic acid IsolationgDNA Isolation FFPE DNA/RNA Isolation
Plasmid extractiongel DNA recoverygenomicDNA/RNA extraction viral nucleic acid extractionCirculating DNA extraction
DNA/RNA Clean Up and concentrationDNA/RNA Isolation from low nucleic acid content samplesResearch immuno assays
The MagPure magnetic-particle technology combines the speed and efficiency of silica-based DNA purification with the convenient handling of magnetic particles. DNA binds to the silica surface of the magnetic particles in the presence of a chaotropic salt. DNA bound to the particles is then efficiently washed, considerably improving the purity of DNA. High-quality DNA is eluted. The automated purification procedure completely removes enzymes, nucleotides, and other contaminants and inhibitors. Purified DNA is suitable for direct use in downstream applications, such as sequencing and microarray analysis.
Document
Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.
