Propargyl-PEG3-acid

The Opentrons® 3-piece Aluminum Block Set is used with our Temperature Deck. The set comes with a 24-well, 96-well and flat bottom plate format block. These are used to keep your 2mL tubes, 1.5mL tubes, 96-well PCR plates, PCR strips and flat bottom plates at a constant temperature. These blocks holds temperatures between 4°C and 95°C when used with the Opentrons Temperature Module (GEN2).

The Opentrons® 3-piece Aluminum Block Set is used with our Temperature Deck. The set comes with a 24-well, 96-well and flat bottom plate format block. These are used to keep your 2mL tubes, 1.5mL tubes, 96-well PCR plates, PCR strips and flat bottom plates at a constant temperature. These blocks holds temperatures between 4°C and 95°C when used with the Opentrons Temperature Module (GEN2).

Introduction

Usages:
For monitoring and detection of surface of equipment and personnel hygiene.

Advantage:
1.This series of products was filling at A level of environment, and final sterilization by Gamma ray irradiation, triple packaging insure sterility and long shelf life.
2.Each dish was marking label product name, batch number, expiration date .Information is available of traceability.
3.Inner additional desiccant, reducing formation of condensation water, while inner additional sterile paper and plastic bags for easier transfer and cultivation.
4.Triple packing dense bags to avoid the penetration of hydrogen peroxide; clean gas was filled as a buffer to reduce broken bags and dish in transit..
5.This series of products is available to store at (2-25 ℃), shelf life of up to 6 months.

Storage: Store in a cool (2-25 ℃), dry place, away from bright light. Storage period of 6 months.

Specifications: 55mm*10 plates / bag

55mm*10 plates / bag

Permagen’s 12 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 12 tubes

Accommodates many common 1.5 mL Microcentrifuge and some 2.0 mL tubes 

Tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet

SKU #

MSR12

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down front side
• Rubber feet to help prevent slippage
• Stable design
• Angled tube holes which allow the tubes to come close to magnets

Compatibility

• Up to twelve 1.5 mL Microcentrifuge Tubes
• Some 2.0 mL Microcentrifuge Tubes
• Any Magnetic Beads

Volumes

Minimum Volume – .5 mL

Maximum Volume – 1.5 mL

Permagen’s 12 x 1.5 mL Microfuge Tube Magnetic rack is designed for magnetic bead separations from up to 12 tubes