Introduction

MagPure Plant DNA Kit supplies a simple and rapid extraction of genomic DNA from different plant pieces and tissues.The kit is based on superparamagnetic particles purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 60 minutes. This kit can be used on different automatic extraction machines like KingFisher ML, KingFisher Flex and KingFisher Duo.Purified DNA can be used directly for PCR, quantitative PCR, southern blot, hybridization, and transgenosis detection.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 50-100 mg plant, fungal tissue
Applications	PCR, transgene detection, fluorescence quantitative PCR, southern blot, SNP site analysis, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Conventional economic plant samples
Sample amount	Fresh / frozen plant samples:≤ 100mgDried plant / seed samples:≤ 20mg
Elution volume	≥50μl
Time per run	≤60 minutes

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol toremove salts, and finally DNA was eluted by Elution Buffer.

Advantages

• Safe – require no phenol or chloroform extraction
• Fast – several samples can be extracted in 60 minutes
• High purity – high quality DNA, completely remove inhibitors

Kit Contents

Contents	D635101	D635102	D635103
Purification Times	48 Preps	96 Preps	5 x 96 Preps
MagPure Particles	1.7 ml	4 ml	18 ml
RNase Solution	0.6 ml	1.2 ml	6 ml
Buffer SPL	30 ml	60 ml	300 ml
Buffer PS	10 ml	20 ml	100 ml
Buffer GW1*	26 ml	53 ml	220 ml
Elution Buffer	10 ml	30 ml	120 ml

Storage and Stability

RNase Solution and MagPure Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

MagPure Plant DNA Kit supplies a simple and rapid extraction of genomic DNA from different plant pieces and tissues.The kit is based on superparamagnetic particles purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 60 minutes. This kit can be used on different automatic extraction machines like KingFisher ML, KingFisher Flex and KingFisher Duo.Purified DNA can be used directly for PCR, quantitative PCR, southern blot, hybridization, and transgenosis detection.

Introduction

HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.

Details

Specifications

Features	Specifications
Main Functions	Isolation total RNA (include miRNA)  from <200mg difficult-to-extract plant samples (use low toxicity chloroform substitutes)
Applications	RT-PCR, qPCR, Northern hybridization, second generation sequencing, nucleic acid protection, in vitro translation
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Hard-to-extraction plant samples such as fruit and seed, grape leaves, tea
Sample amount	≤200 mg
Elution volume	≥30μl
Time per run	1-24 samples within 30 minutes
Liquid carrying volume per column	800µl
Binding yield of column	100µg

Principle

This kit uses glass fiber filter membrane purification technique, and only requires simple combination-washing-elution steps. The sample is lysed and homogenized in the solution containing guanidine salt, ethanol is added to provide appropriate binding conditions, and transferred to the purification column for centrifugation. Up to 100µg of RNA can be selectively bound to the membrane, pollutants are efficiently washed off after three times of washing, and finally the purified RNA is eluted by RNase Free Water.

Advantages

• Completely remove DNA by using of DNase
• High quality – one-step RNA extraction reagent combined with silica gel column can obtain the highest concentration
• Fast – several samples can be extracted in 40 minutes by column method
• Sensitive – RNA can be recovered at the level of PG
• Broad spectrum – various types of plant samples can be processed by diversity of operating procedures

Kit Contents

Contents	R416502	D416503
Purification Times	50 Preps	250 Preps
HiPure RNA Mini Columns	50	250
2ml Collection Tubes	100	250
DNase I	600 μl	5 x 600 μl
DNase Buffer	6 ml	30 ml
Buffer PAL	60 ml	270 ml
Buffer GXP2*	20 ml	100 ml
Buffer BDP	60 ml	270 ml
Buffer RW1	50 ml	250 ml
Buffer RW2*	20 ml	2 x 50 ml
RNase Free Water	10 ml	30 ml

Storage and Stability

DNase I should be stored at -20-8°C upon arrival. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Purchase Guide

1. When dealing with woody or uncommon samples, R4150 is recommended first. R4150 contains two polysaccharide/polyphenol lysis buffer, which is the most universal product.

2. R4151 is recommended for handling common economic crop samples for the first time. Strong lysis solution can be used to process easy-extraction samples. The amount of corn or rice leaves samples can reach up to 300mg.

3. R4165 adopts CTAB/chloroform method, which can also handle a large number of difficult-to-extraction plants, but requires contact with chloroform substitutes, which is less safe than other kits. This kit uses DNase Ⅰ to remove DNA, which is also a good choice for extracting polysaccharide/polyphenol-rich plant samples.

4. R4014 is recommended for fruit/starch plant samples, which uses improved trizol pre-treatment, single column operation and is more economical.

Select the right purification kit to get impactful results：

Ⅰ. Purchase guide of Magen kits based on sample

Ⅱ. Cross purchase guide for Magen kits vs Other brands

For any customized product or OEM service, please contact us.

HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.

Overview

• Isolate genomic DNA from animal tissues, cells, bodily fluids, viruses and swabs 
• Rapid and convenient spin column procedure 
• Purified DNA is of the highest quality and integrity for sensitive downstream applications including PCR, qPCR, genotyping, sequencing and more

This kit is designed for the rapid preparation of genomic DNA from various tissue samples, cultured cells, viruses, bodily fluids and swabs using a rapid spin column protocol. Purified DNA is of an excellent yield and quality, and is immediately ready for any downstream application including PCR, qPCR, genotyping, sequencing and more.  The protocol can be completed in approximately 80 minutes (including incubation time).

Details

Supporting Data

Figure 1 / 2

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	25 µg
Average Yield:* HeLa Cells (1 x 106) Tissue (from 10 mg kidney)	8 µg 10 µg
Maximum Amount of Starting Material: Animal Tissues Cultured Cells Bodily Fluids (blood, saliva) Viral Suspension	20 mg 3 x 106 cells 150 µL 150 µL
Time to Complete 10 Purifications	80 minutes

* Yield will vary depending on the type of sample processed

Storage Conditions and Product Stability
The Proteinase K should be stored at -20°C upon arrival and after reconstitution. All other solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.

Component	Cat. 24700 (50 preps)	Cat. 24750 (100 preps)	Cat. 24770 (250 preps)
Digestion Buffer A	25 mL	2 x 25 mL	5 x 25 mL
Buffer SK	30 mL	2 x 30 mL	5 x 30 mL
Wash Solution A	18 mL	2 x 18 mL	5 x 18 mL
Elution Buffer B	30 mL	2 x 30 mL	5 x 30 mL
Proteinase K	12 mg	2 x 12 mg	5 x 12 mg
Spin Columns	50	100	250
Collection Tubes	50	100	250
Elution Tubes (1.7 mL)	50	100	250
Product Insert	1	1	1