[QP3110] Q-PAGE™ Bis-Tris Precast Gel (Midi, 12 wells, 8%), 10 gels

Description

Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.

The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.

Packaged, optimised and ready to use. Expect Better Data.

Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request

Description 

The DM3200 ExcelBand™ 1 KB Plus (0.1-10 kb) DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct gel loading. The DNA Ladder DM3200 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring. 

Features

• Sharp bands
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA. 

Range 

100 ~ 10,000 bp 

Concentration 

87 µg/ 500 µl 

Recommended loading volume 

5 µl/ well 

Storage

Room temperature for 6 months
4°C for 12 months 
-20°C for 36 months

The DM3200 ExcelBand™ 1 KB Plus (0.1-10 kb) DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct gel loading. The DNA Ladder DM3200 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring.

Overview

• AAV Purification from any input – cell fraction or media fraction
• High AAV recovery, up to 90%
• No specialized equipment needed
• Purification from a variety of AAV serotypes (including AAV6 and AAV9)
• Yields highly active AAV for in vivo and in vitro experiments
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

Recombinant adeno-associated virus (AAV) vectors are highly promising tools for both in vitro and in vivo gene transfer. Norgen’s AAV Purification Kits provide fast and simple procedures for concentrating and purifying AAV vectors from cell lysate and cell culture media. Purification is based on precipitation onto Norgen Biotek’s proprietary resin. Contaminating cellular debris is largely removed from the sample via a centrifugation step, while contaminating DNA and RNA is reduced using enzymatic digestion. AAV vector purified in this manner is highly active for use in in vitro and in vivo transduction experiments.

AAV Purification Kit

Norgen’s AAV Purification Kit contains sufficient materials for 15 preparations (33.5 mL per prep of supernatant (SN) or a total of 500 mL of supernatant input). Approximately 1 mL of cell pellet can be purified per prep, up to a maximum of 15 mL of cell pellet in total for the entire kit. Up to 33X sample concentration.

AAV Purification Mini Kit

Each spin column is able to concentrate and purify AAV from 0.5-8 mL of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (200 µL). Preparation time for 4 samples is 1.5 hours, with 45 minutes of hands-on time.

AAV Purification Midi Kit

Each spin column is able to concentrate and purify AAV from 8 mL up to 45 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1 mL). The kit may be used to purify up to 8 x 25 mL or 4 x 45 mL of samples using the included columns. Preparation time for 4 samples is approximately 2 to 2.5 hours, with 1.5 hours of hands on time.

AAV Purification Maxi Kit (Slurry Format)

Each spin column is able to concentrate and purify AAV from 45 mL to 90 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 200X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1-10 mL) using the optional concentration step. The kit may be used to purify up to 1 x 900 mL samples or 10 x 45-90 mL samples using the included columns. Preparation time for 1 x 900 mL sample is approximately 2.5 to 3.5 hours, with an optional concentration step requiring an additional 30 min.

Details

Supporting Data

Figure 1 / 10

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	At least 1 x 1010 AAV particles as determined by qPCR
AAV Vector Serotype	Any
Average Recovery	> 80%
Input Type	Cells, media, or mixed
Input Volume	8 mL – 45 mL
Minimum Elution Volume	1 mL
Time to Complete 4 Purifications	2 – 2.5 hours

 
Storage Conditions and Product Stability
DNAse I and RNAse A should be stored at -20°C upon arrival. Elution Buffer O should be stored tightly capped at 4°C upon arrival. All other solutions should be kept tightly sealed and stored at room temperature. Once opened, the solutions should be stored at 4°C. This kit is stable for 1 year after the date of shipment.

Component	Cat. 66100 (15 preps)	Cat. 63200 (20 preps)	Cat. 63300 (4-8 preps)	Cat. 63250 (1-10 preps)
Lysis Buffer S	5.5 mL	5.5 mL	5.5 mL	20 mL
DNAse I	–	2 x 25 uL	2 x 25 uL	210 μL
RNAse A	–	60 μL	60 μL	240 μL
HL-SAN Nuclease	102 μL	–	–	–
Binding Buffer A	20 mL	4 mL	4 mL	2 x 8 mL
Purification Solution C	60 mL	–	–	–
Purification Solution D	130 mL	–	–	–
Wash Solution C	2 x 130 mL	60 mL	60 mL	3 x 60 mL
Slurry E	12.5 mL	–	–	2 x 14.5 mL
Elution Buffer O	66 mL	8.5 mL	8.5 mL	66 mL
Protein Neutralizer	4 mL	4 mL	4 mL	4 mL
Spin Columns	–	20	–	–
Mini Spin Columns	–	20	–	–
Midi Spin Columns (grey contents) with Collection Tubes	–	–	8	10
Midi Spin Columns (white contents) with Collection Tubes	–	–	8	–
Maxi Spin Columns (grey contents) with Collection Tubes	–	–	–	10
Maxi Spin Columns (white contents) with Collection Tubes	–	–	–	10
Collection Tubes	–	40	–	–
Elution tubes (1.7 mL)	50	20	–	–
Midi Elution tubes (15 mL)	–	–	8	10
Maxi Elution tubes (50 mL)	–	–	–	10
Product Insert	1	1	1	1