[QP4220] Q-PAGE™ TGN Precast Gel (Mini, 15 wells, 10%), 10 gels

DBCO-PEG12-DBCO is a monodisperse click chemistry linker containing two terminal DBCO groups with hydrophilic PEG spacer arm. DBCO will react with azide-bearing compounds or biomolecules to form a stable triazole linkage without copper catalyst. PEG spacer arm can increase water solubility and membrane permability. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

DBCO-PEG12-DBCO is a monodisperse click chemistry linker containing two terminal DBCO groups with hydrophilic PEG spacer arm. DBCO will react with azide-bearing compounds or biomolecules to form a stable triazole linkage without copper catalyst. PEG spacer arm can increase water solubility and membrane permability. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

Overview

• Detection kits for Cryptosporidium
• CE-IVD marked version available for in vitro diagnostic use
• Available in TaqMan format for analysis

Cryptosporidium is a parasite found in water that causes an infection in mammals termed cryptosporidiosis. It is one of the most common water-borne diseases and is found world-wide. It affects the intestines of mammals and typically causes an acute short-term infection. The most common symptom is self-limiting diarrhea in healthy individuals, however in immunocompromised individuals the symptoms are particularly severe and often fatal. There is no specific treatment for cryptosporidiosis other than fluid rehydration and management of any pain. Therefore early detection of Cryptosporidium in water is the foremost action to prevent the infection.

Cryptosporidium TaqMan RT-PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

Cryptosporidium TaqMan RT-PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s RT-PCR Master Mix (#28113) or customer supplied master mix

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 1 year after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. TM39150 (100 preps)	Cat. TM39110 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
Cryptosporidium Primer & Probe Mix	280 μL	280 μL
Cryptosporidium Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Overview

• AAV Purification from any input – cell fraction or media fraction
• High AAV recovery, up to 90%
• No specialized equipment needed
• Purification from a variety of AAV serotypes (including AAV6 and AAV9)
• Yields highly active AAV for in vivo and in vitro experiments
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

Recombinant adeno-associated virus (AAV) vectors are highly promising tools for both in vitro and in vivo gene transfer. Norgen’s AAV Purification Kits provide fast and simple procedures for concentrating and purifying AAV vectors from cell lysate and cell culture media. Purification is based on precipitation onto Norgen Biotek’s proprietary resin. Contaminating cellular debris is largely removed from the sample via a centrifugation step, while contaminating DNA and RNA is reduced using enzymatic digestion. AAV vector purified in this manner is highly active for use in in vitro and in vivo transduction experiments.

AAV Purification Kit

Norgen’s AAV Purification Kit contains sufficient materials for 15 preparations (33.5 mL per prep of supernatant (SN) or a total of 500 mL of supernatant input). Approximately 1 mL of cell pellet can be purified per prep, up to a maximum of 15 mL of cell pellet in total for the entire kit. Up to 33X sample concentration.

AAV Purification Mini Kit

Each spin column is able to concentrate and purify AAV from 0.5-8 mL of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (200 µL). Preparation time for 4 samples is 1.5 hours, with 45 minutes of hands-on time.

AAV Purification Midi Kit

Each spin column is able to concentrate and purify AAV from 8 mL up to 45 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1 mL). The kit may be used to purify up to 8 x 25 mL or 4 x 45 mL of samples using the included columns. Preparation time for 4 samples is approximately 2 to 2.5 hours, with 1.5 hours of hands on time.

AAV Purification Maxi Kit (Slurry Format)

Each spin column is able to concentrate and purify AAV from 45 mL to 90 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 200X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1-10 mL) using the optional concentration step. The kit may be used to purify up to 1 x 900 mL samples or 10 x 45-90 mL samples using the included columns. Preparation time for 1 x 900 mL sample is approximately 2.5 to 3.5 hours, with an optional concentration step requiring an additional 30 min.

Details

Supporting Data

Figure 1 / 10

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	At least 5 x 109 AAV particles as determined by qPCR
AAV Vector Serotype	Any
Average Recovery	> 80%
Input Type	Cells, media, or mixed
Input Volume	0.5 mL – 8 mL
Minimum Elution Volume	200 µL
Time to Complete Purifications	1 – 2 hours

 
Storage Conditions and Product Stability
DNAse I and RNAse A should be stored at -20°C upon arrival. Elution Buffer O should be stored tightly capped at 4°C upon arrival. All other solutions should be kept tightly sealed and stored at room temperature. Once opened, the solutions should be stored at 4°C. This kit is stable for 1 year after the date of shipment.

Component	Cat. 66100 (15 preps)	Cat. 63200 (20 preps)	Cat. 63300 (4-8 preps)	Cat. 63250 (1-10 preps)
Lysis Buffer S	5.5 mL	5.5 mL	5.5 mL	20 mL
DNAse I	–	2 x 25 uL	2 x 25 uL	210 μL
RNAse A	–	60 μL	60 μL	240 μL
HL-SAN Nuclease	102 μL	–	–	–
Binding Buffer A	20 mL	4 mL	4 mL	2 x 8 mL
Purification Solution C	60 mL	–	–	–
Purification Solution D	130 mL	–	–	–
Wash Solution C	2 x 130 mL	60 mL	60 mL	3 x 60 mL
Slurry E	12.5 mL	–	–	2 x 14.5 mL
Elution Buffer O	66 mL	8.5 mL	8.5 mL	66 mL
Protein Neutralizer	4 mL	4 mL	4 mL	4 mL
Spin Columns	–	20	–	–
Mini Spin Columns	–	20	–	–
Midi Spin Columns (grey contents) with Collection Tubes	–	–	8	10
Midi Spin Columns (white contents) with Collection Tubes	–	–	8	–
Maxi Spin Columns (grey contents) with Collection Tubes	–	–	–	10
Maxi Spin Columns (white contents) with Collection Tubes	–	–	–	10
Collection Tubes	–	40	–	–
Elution tubes (1.7 mL)	50	20	–	–
Midi Elution tubes (15 mL)	–	–	8	10
Maxi Elution tubes (50 mL)	–	–	–	10
Product Insert	1	1	1	1