The kit is developed for RNA quantification. The RNA Quantification HS kit includes HS Dye, HS Dilution Buffer, and two RNA Standards. Simply dilute the HS Dye with the HS Dilution Buffer, add RNA sample, then read the concentration using the Qubit Fluorometer. The assay is accurate for RNA concentrations from 250 pg/µL to 100 ng/µL (Figure 1). The RNA Quantification High Sensitivity Kit has several advantages over traditional RNA quantitation such as stability, sensitivity, and contaminant tolerance.
Detail
The kit is developed for RNA quantification. The RNA Quantification HS kit includes HS Dye, HS Dilution Buffer, and two RNA Standards. Simply dilute the HS Dye with the HS Dilution Buffer, add RNA sample, then read the concentration using the Qubit Fluorometer. The assay is accurate for RNA concentrations from 250 pg/µL to 100 ng/µL (Figure 1). The RNA Quantification High Sensitivity Kit has several advantages over traditional RNA quantitation such as stability, sensitivity, and contaminant tolerance.
Features
Optimized condition for using with the Qubit Fluorometer
Uses the Qubit RNA High Sensitivity assay setting
Cuts costs by 60%
The performance of the BioDynami RNA Quantification HS kit is nearly identical to that of Thermo Fisher’s Qubit RNA HS kit (figure below).
Common contaminants such as detergents, solvents, salts, free nucleotides, or protein are well tolerated in the assay (Table 1).
Qubit is a registered trademark of Thermo Fisher Scientific.
Other Products
β-Glucan Assay Kit (Mixed Linkage)
Product Info
Document
Product Info
K-BGLU
SKU: 700004269
100 assays per kit
Content:
100 assays per kit
Shipping Temperature:
Ambient
Storage Temperature:
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
β-Glucan
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
510
Signal Response:
Increase
Linear Range:
4 to 100 μg of D-glucose per assay
Limit of Detection:
0.5 g/100 g
Total Assay Time:
~ 100 min
Application examples:
Oats, barley, malt, wort, beer, food and other materials.
Method recognition:
AACC Method 32-23.01, AOAC Method 995.16, AOAC Method 992.28, CODEX Method Type II, EBC Method 3.10.1, ICC Standard No. 166 and RACI Standard Method
The Beta-Glucan test kit is suitable for the measurement and analysis of Beta-Glucan (Mixed Linkage).
For the measurement of 1,3:1,4-β-D-glucan in cereal grains, milling fractions, wort, beer and other food products.
Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:
1. The sample is highly infectious, posing great harm to operators and the environment.
2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;
3. Blood sample contains a large amount of impurities and inhibitory factors.
Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.
The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.
This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern Blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from tissue and culture cells.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from 2ml blood and 200mg tissue using Midi column
Applications
PCR, southern bolt and virus detection, etc
Purification method
Midi spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
Sample amount
0.2-2 ml
Elution volume
≥300μl
Time per run
≤80 minutes
Liquid carrying volume per column
4ml
Binding yield of column
1mg
Principles
This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
Fast – without separation of leukocytes, organic extraction or ethanol precipitation
Simple – all nucleic acids can be obtained by direct digestion
Wide applicability – handle a variety of liquid samples
Kit Contents
Contents
D311302
D311303
Purification Times
20
100
HiPure gDNA Midi Columns
20
100
15ml Collection Tubes
40
200
Buffer ATL
50 ml
250 ml
Buffer AL
50 ml
250 ml
Buffer GW1*
22 ml
110 ml
Buffer GW2*
12 ml
50 ml
RNase A
20 mg
90 mg
Proteinase K
100 mg
440 mg
Protease Dissolve Buffer
10 ml
30 ml
Buffer AE
20 ml
120 ml
Storage and Stability
Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:
The Kit provides a high throughput of high-quality RNA from 96 samples of cells, tissues, and yeast using silica-membrane spin column plate with a binding capacity of 100ug RNA. RNA purified using the HiPure Total RNA System is ready for applications such as RT-PCR, Northern blotting, poly A+ RNA (mRNA) purification, nuclease protection, and in vitro translation.
Details
Principle
HiPure RNA technology simplifies total RNA isolation. Samples are first lysed and then homogenized. Ethanol is added to the lysate to provide ideal binding conditions. The lysate is then loaded onto the HiPure silica membrane and RNA binds to the silica membrane, and all contaminants are efficiently washed away. For certain RNA applications that are sensitive to very small amounts of DNA, the residual amounts of DNA remaining can be removed using a convenient on-column DNase treatment. Pure, concentrated RNA is eluted in water.
Kit Contents
Contents
R401601
R401602
Purification Times
1 x 96
4 x 96
HiPure RNA Plate
1
4
1.5ml Collection Plate
1
4
0.5ml Collection Plate
1
4
RTL Lysis Buffer
100 ml
400 ml
RNA Binding Buffer*
30 ml
120 ml
Buffer RW1
100 ml
400 ml
Buffer RW2*
50 ml
2 x 100 ml
RNase Free Water
20 ml
80 ml
Storage and Stability
The Kit can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
Document
The Kit provides a high throughput of high-quality RNA from 96 samples of cells, tissues, and yeast using silica-membrane spin column plate with a binding capacity of 100ug RNA. RNA purified using the HiPure Total RNA System is ready for applications such as RT-PCR, Northern blotting, poly A+ RNA (mRNA) purification, nuclease protection, and in vitro translation.
