1. Microprocessor control, less noisily, it is widely used to qualitative analysis of blood serum, plasma and urea in the fields of hospital, laboratory and biochemistry.
2. Brushless motor, free maintenance, no powder pollution, quick in speed up and down.
3. The flexible axle driven system which drive the rotor directly, smooth in operation and small vibration.
4. Micro computer control system, digital display the RCF，time and speed.
5. Electric lid lock, compact design, super speed and imbalance protection.
(Fluorescence) 0.009-0.18 μg of D-glucose per assay (0.5-10 μM in-assay) (Absorbance) 0.9-9.0 μg of D-glucose per assay (5-50 μM in-assay)
Limit of Detection:
(Fluorescence) 0.09 ug/mL (Absorbance) 0.25 ug/mL
Reproducibility (%):
(Fluorescence) ~ 6% (Absorbance) ~ 7%
Reaction Time (min):
(Fluorescence) 30 min (Absorbance) 30 min
Application examples:
Food and beverage samples such as wine, beer, fruit juices, soft drinks, milk, jam, dietetic foods, bakery products, candies, fruit and vegetables. Other samples such as tobacco, cosmetics, pharmaceuticals (e.g. infusions), feed, paper (and cardboard) and other materials (e.g. biological cultures, samples, etc.).
This product has been discontinued.
The D-Glucose Assay Kit (Megaplex Red) provides a simple robust method for the measurement of D-glucose. This kit utilises a highly sensitive Megaplex Red probe which when coupled to horseradish peroxidase (HRP) and glucose oxidase (GOX) enzymatic reactions, allows for the measurement of D-glucose in a sample. Upon oxidation of the probe by HRP, a coloured product (resorufin) is formed that can be measured in fluorescence mode using excitation between 530-560 nm and emission at ~ 590 nm* or colourimetrically at 570 nm.
*The excitation and emission maxima of Megaplex Red are 570 nm and 585 nm respectively.
Fluorometric/UV method for the determination of D-glucose content in a variety of samples.
Advantages
Simple format
Very competitive price (cost per test)
Ability to run in fluorescence or absorbance mode
User friendly – Detailed protocol provided for the creation of calibration curve and the calculation of concentration in fluorescence mode. Single point standard for quicker and simpler analysis in absorbance mode.
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Suitable for manual, microplate and auto-analyser formats
All reagents stable for > 2 years
Document
The D-Glucose Assay Kit (Megaplex Red) provides a simple robust method for the measurement of D-glucose. This kit utilises a highly sensitive Megaplex Red probe which when coupled to horseradish peroxidase (HRP) and glucose oxidase (GOX) enzymatic reactions, allows for the measurement of D-glucose in a sample. Upon oxidation of the probe by HRP, a coloured product (resorufin) is formed that can be measured in fluorescence mode using excitation between 530-560 nm and emission at ~ 590 nm* or colourimetrically at 570 nm.
>The display can simultaneously display:all main parameters such as cold trap temperature,vacuum degree,sample temperature, and shelf temperature.
>Schematic diagram of equipment operating components,through graphic display to view the working status of each component of the equipment.
>Ithas the functions of cold trap precooling and vacuum pump preheating,and the time can be set by the userin the system. >Display whether the current running status is normal or not by numerical color.
o One-key operation,the operation is extremely simple,no special professional learning and training is required.
o Thermal electromagnetic over-current and short-circuit protection,making the equipment run more safely and stably.
o Active reminder of equipment maintenance time and vacuum pump replacement lubricating oil time.
o Ambient temperature monitoring,the device automatically reminds the alarm if the ambient temperature is too high.
o Optional eutectic point detection device and endpointjudgment detection system make freeze-drying more scientific.
Dryingchamber
· The separate drying chamber reduces the probability of damage caused byimproper handling of the drying chamber due to height and weight.The upper cover is anodized aluminum with anti-corrosion treatment.●Highly transparent plexiglass drying chamber,good light and heat radiation conduction.Reserve 6/12 external valve ports.· 316L stainless steel all black Teflon coating drying chamber,suitable for drying organic solvents and various corrosive samples,reserved for 6/12 external ports.· 316L stainless steel vertical multi-port multi-manifold external rack(The standard configuration is aplexiglass drying chamber,and one ofthe diying chambers can be optional)
Coldtrapandcondensingcoil
· The cold trap cavity and condensation coil are made of 316L stainless steel.Large opening and channel design,the gas can be quickly captured through the condensing coil.· The cavity and condensing coil are equipped with Teflon anti corrosion coating as standard,which can trap organic solvents and various corrosive solvents.· The condensing coil is placed in the cold trap to increase the condensate catchment area,which can effectively prevent external condensation.
Sampleshelves
· 316Lstainless steel stackable sample shelves,capable oflyophilizing machine solvents and various corrosive solvents.Each shelf can be placed and taken freely without manual work.The distance and height ofeach shelfcan be adjusted freely.-All black coating,good heat absorption performance.-Special hole for freeze-drying of centrifuge tubes,which is conducive to the drying of samples in centrifugetube containers.· All-aluminum Teflon surface anti-corrosion treatment electric heating shelf.
Refrigerationsystem
· Danffos compressorCopper plate heat exchanger,the largest area to increase heat dissipation· Unique refrigeration technology,the temperature of the cold trap can be lowered from ambient temperatureto below-80C°within 2 minutes.· Class A temperature sensor with high temperature accuracy and low error.· Multiple detection and alarm system,the refrigeration system pressure is too high or refrigeration failure cantimely alarm and take corresponding measures.
Techinical parameter
ItemNo
ST7003
ST7006
ST9006
Ice condenser capacity
3kg
6kg
6kg
Ice condenser temperature
-70℃
-70℃
-90℃
Cold trap volume
5L
10L
10L
Freeze dried chamber
Bell shape (standard configuration)/Multi manifold type/T-shaped frame type
Sample shelf
φ200mm.Single layer area 0.03m2 with 3-5 layers available
●260mm/485mm.Single layer area 0.055m²/0.185m².3-10 layers/optional ● Electric heating/manual capping/optiona
Vacuum pump
Extreme vacuum 5*10*mbar with a pumping capacity of 8m³/h optional pump of various types
Oil mist filte
Standard configuration
Vacuum pump connection pipe
Single forming stainless steel flexible pipe DN16 ISO-KF L-1.2m
Anti-corrosive treatment
Cold trap,condensing coil/all equipped with PTFE anti-corrosion treatment as standard. Freeze-drying organic solvents.
External valve
6pieces/optional
1-48 pieces/optional
Eutectic point detection system
Support/Optional
Data output analysis
Support/Optional
Powe
0.6kw
1.1kw
1.5kw
Size
420*545*455mm
510*570*500mm
Document
Freezer Dryer, 3kgs-6kgs water capturer
Model:
ST7003,ST7006,ST9006
Thin polyester heat sealing film which is easily pierceable with autosampler needles/ABI® 3730. The seal is suitable for PCR, qPCR and optical applications.
Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective
Our ClearASeal Pierce heat sealing film is an optically clear polyester backed film, forming a pierceable seal to polypropylene, polyethylene, polystyrene and cyclic olefin copolymer (COC) plates
The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays
Its pierceability renders it useful for automation and for use on needle, capillary and tip based liquid handling systems
It is effective on the ABI®3730 capillary sequencer, removing the need for the use of expensive septa mats
The ClearASeal Pierce forms a complete seal to a plate enabling moderately low and high temperature uses, including PCR when using a pressurized heated lid thermal cycler
It demonstrates a moderate solvent resistance and can be utilized for short term compound storage
This seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
Also available in multiple roll formats compatible with specified automated heat sealers, such as our Wasp or Chameleon XT
Document
Thin polyester heat sealing film which is easily pierceable with autosampler needles/ABI® 3730. The seal is suitable for PCR, qPCR and optical applications.
