Introduction

This Kit is designed forpurification of high quality circulating DNA (cfDNA) from 1-6ml cell-free bodyfluids (such as plasma, serum). The purified DNA is suitable for direct use indownstream applications such as PCR, real-time PCR, Biochip analysis and NGS.

Details

Specifications

Features	Specifications
Main Functions	Isolation circulating DNA from 1-6ml plasma, serum, body fluids
Applications	qPCR, NGS, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Serum, plasma
Sample amount	1-6ml
Elution volume	≥50μl
Time per run	≤60 minutes

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by elution buffer.

Advantages

• Economy – less than 50% of the price of Qiagen and other imported products
• Automatic – without labour
• High purity – OD 260 / 280 : 1.7-1.9, OD 260 / 230 :1.5-2.0

Kit Contents

Contents	IVD5435
Purification Times	50
MagPure Particles F	14 ml
Carrier RNA	310 μg
Proteinase K	240 mg
Protease Dissolve Buffer	15 ml
Buffer SDS	15 ml
Buffer MLK	500 ml
Buffer MAW1	250 ml
Buffer MW2*	50 ml
Elution Buffer	60 ml

Storage and Stability

Proteinase K, Carrier RNA and MagPure Particles F should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance.Theremaining kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions.The entire kit can be stored at 2–8°C, but in this case buffers should beredissolved before use. Make sure that all buffers are at room temperature when used.

Experiment Data

This Kit is designed forpurification of high quality circulating DNA (cfDNA) from 1-6ml cell-free bodyfluids (such as plasma, serum). The purified DNA is suitable for direct use indownstream applications such as PCR, real-time PCR, Biochip analysis and NGS.

endo-BCN-PEG2-PFP ester is a click chemistry active ester. The PFP esters have similar applications as the NHS esters, but are more stable in aqueous solution. They can be used to label the primary amines (-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules. The BCN group can react with azide-tagged biomolecules. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

endo-BCN-PEG2-PFP ester is a click chemistry active ester. The PFP esters have similar applications as the NHS esters, but are more stable in aqueous solution. They can be used to label the primary amines (-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules. The BCN group can react with azide-tagged biomolecules. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

Introduction

The HiPure Liquid RNA & miRNA Kit integrates phenol/guanidine-based sample lysis and silica membrane purification of total RNA. MagZol LS Reagent, included in the kits, is a monophasic solution of phenol and guanidine thiocyanate designed to facilitate lysis of liquid sample and inhibit RNase. The high lysis efficiency of the reagent and the subsequent removal of contaminants by organic phase extraction enable the use of up to 0.25ml liquid sample per mini spin column.

Details

Specifications

Features	Specifications
Main Functions	Isolation total RNA from 0.25ml body fluids using column and MagZol LS reagent
Applications	qPCR / RT-PCR, liquid or solid-phasechip analysis, hybridization and SNP detection
Purification method	Mini spin column
Purification technology	Silica technology, acidphenol / guanidine extraction technology (MagZol pretreatment technology)
Process method	Manual (centrifugation or vacuum)
Sample type	Blood, serum, plasma
Sample amount	250μl
Elution volume	≥20μl
Liquid carrying volume per column	800µl
Binding yield of column	100μg

Principle

0.25ml liquid samples are homogenized in 0.75ml MagZol LS Reagent. After addition of chloroform, the homogenate is separated into aqueous and organic phases by centrifugation. The upper, aqueous phase is extracted, and ethanol is added to provide appropriate binding conditions. The sample is then applied to the spin column, where the total RNA (up to 100 µg) binds to the membrane and phenol and other contaminants are efficiently washed away. High-quality RNA is then eluted in 30–100µl of RNase-free water.

Advantages

• High quality – high purity total RNA can be directly used in various sensitive downstream applications
• Fast – isolation of several samples can be completed in 40 minutes by using column purification method
• Safety – no phenol chloroform extraction required
• Sensitive – direct lysis of blood, plasma and other samples without separation of leukocytes

Kit Contents

Contents	R416302	R416303
Purification Times	50 Preps	250 Preps
HiPure RNA Mini Columns	50	250
2ml Collection Tubes	50	2 x 125
MagZol LS Reagent	60 ml	270 ml
Buffer RWC	20 ml	60 ml
Buffer RW2*	20 ml	2 x 50 ml
RNase Free Water	10 ml	30 ml

Storage and Stability

MagZol LS Reagent should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

The HiPure Liquid RNA & miRNA Kit integrates phenol/guanidine-based sample lysis and silica membrane purification of total RNA. MagZol LS Reagent, included in the kits, is a monophasic solution of phenol and guanidine thiocyanate designed to facilitate lysis of liquid sample and inhibit RNase. The high lysis efficiency of the reagent and the subsequent removal of contaminants by organic phase extraction enable the use of up to 0.25ml liquid sample per mini spin column.