TGL20 Table Top High Speed Refrigerated Centrifuge 

K-ARAB

100 assays per kit

Content:	100 assays per kit
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:	> 2 years under recommended storage conditions

Analyte:	Arabinan
Assay Format:	Spectrophotometer
Detection Method:	Absorbance
Wavelength (nm):	340
Signal Response:	Increase
Limit of Detection:	1.3 mg/L
Reaction Time (min):	~ 70 min
Application examples:	Fruit juices and other materials.
Method recognition:	Novel method

This product has been discontinued (read more).

The Arabinan test kit is suitable for the measurement and analysis of Arabinan in fruit juice concentrates.

View all of our polysaccharide assay kits.

Advantages

• Very rapid reaction due to inclusion of galactose mutarotase (patented technology) 
• Very cost effective 
• All reagents stable for > 2 years after preparation 
• Only enzymatic kit available 
• Very specific 
• Simple format 
• Mega-Calc™ software tool is available from our website for hassle-free raw data processing 
• Standard included

The Arabinan test kit is suitable for the measurement and analysis of Arabinan in fruit juice concentrates.

Description 

The DM4160 FluoroBand™ XL 25 kb Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM4160 is composed of 14 individual DNA fragments: 25k, 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank. 

Features

• Sharp bands
• Quick reference— enhanced bands 
• Ready-to-use— premixed with loading dye for direct loading
• Stable— room temperature storage over 6 months
• Directly observed by UV or blue light— premixed with high sensitive DNA fluorescent dye

Source 

Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.

Range 

250 ~ 25,000 bp 

Concentration 

51.6 µg/ 500 µl 

Recommended loading volume 

5 µl/ well

Storage

Protected from light 
Room temperature for 6 months
4°C for 12 months 
-20°C for 24 months 

The DM4160 FluoroBand™ XL 25 kb Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM4160 is composed of 14 individual DNA fragments: 25k, 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains two enhanced bands (3 kb and 1 kb) for easier reference. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.

The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential. Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.  

Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added two angled, partial frames around the top of our plate, this helps with two things, straightening out the PCR plate, and leading it to the proper location on the magnets when using an automated liquid handling robot.

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

SKU #

MSP750 (Magnet Plate only)

MSP750KT (Includes top plate kit)

Features

• SBS/ SLAS footprint
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Beads are pulled to tube walls for easy removal
• Made in USA 
• For Research use only

Compatibility

• Full – Skirt PCR plates
• Semi- Skirted PCR plates 
• Non- Skirted PCR plates
• 0.2 mL PCR Strips and tubes  (With kit)
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volumes

Minimum – 30 µL 

Maximum – 0.2 mL

The Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual or automation applications where pulling beads to one side of the wells is essential. Also available in a kit form which includes our MTP96 clear top plate for 0.2 mL PCR tubes and strips.