The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.
Specifications
| Features | Specifications |
| Main Functions | Isolation up to 20µg plasmid DNA from 1.5ml bacterial culture using 96 well bind plate and 96 filterplate |
| Applications | Enzyme digestion, sequencing, PCR, labeling, etc. |
| Purification method | 96 well plate |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Conventional plasmid, plasmid less than 30KB |
| Sample amount | 1-1.5ml（x96） |
| Yield | 1-15µg/1ml |
| Elution volume | ≥70μl |
| Time per run | ≤60 minutes |
| Liquid carrying volume per column | 800µl |
| Binding yield of column | 70µg |
The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
Kit Contents
| Contents | P100601 | P100602 | P100603 |
| Purification Times | 1 x 96 Preps | 4 x 96 Preps | 20 x 96 Preps |
| RNase A | 5 mg | 20 mg | 100 mg |
| Buffer P1 | 30 ml | 120 ml | 600 ml |
| Buffer P2 | 30 ml | 120 ml | 600 ml |
| Buffer P3 | 40 ml | 180 ml | 800 ml |
| Buffer PW1 | 100 ml | 500 ml | 2 x 1000 ml |
| Buffer PW2 | 50 ml | 2 x 100 ml | 4 x 200 ml |
| Elution Buffer | 150 ml | 60 ml | 300 ml |
| Lysate Clear Plate | 1 | 4 | 20 |
| HiPure DNA Plate | 1 | 4 | 20 |
| 1.6 ml Collection Plate | 1 | 4 | 20 |
| 0.5ml Elute Plate | 1 | 4 | 20 |
Storage and Stability
The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.
For any technical problems or customized products, please contact us.
F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here
The HiPure Plasmid DNA Plus 96 Kit enables up to 96 minipreps to be performed simultaneously in less than 45 minutes on the Vacuum Manifold (Qiavac 96). This kit provides a fast, simple,and cost-effective plasmid DNA high-throughput method for routine molecular biology laboratory applications. HiPure Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries.Plasmid DNA purified with Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of Tris buffer or water.
Product Description
Lyophilized RNA Amplification Kit -20°C Format Easy And Efficient
Kit Storage and term of Validity
Storage term: stored at ≤-20℃,keep away from light, avoid heavy weight and repeated freezing and thawing.
Term of Validity: 14 months
Isothermal nucleic acid Principle Summary
This kit is based on a rapid nucleic acid amplification technology at room temperature and constant temperature: at room temperature and constant temperature (generally 39 ºC~42 ºC), reverse transcriptase uses specific primers and template RNA to synthesize cDNA strands, and binds the auxiliary protein and single strand With the help of the protein, the recombinase and the primer form a complex; perform a homology search and bind the target homology domain, at this time a D-loop region is formed at the homology position and strand exchange begins; accompanied by the recombinase from the complex Upon dissociation, the polymerase also binds to the 3′ end of the primer, initiating chain extension. Relying on the action of nfo enzyme, adding specific molecular probes designed according to the template, and using colloidal gold technology (sandwich method) can detect the final result.
Isothermal nucleic acid Product Features
1/ High sensitivity and specificity, short reaction time.
2/ The reagent form is freeze-dried, stable and easy to operate.
3/ The reaction can be operated by metal bath and water bath pot without purchasing expensive PCR apparatus.
Technical Parameters:
| Parameters | Details |
|---|---|
| Product Name | RNA Isothermal Amplification Kit NFO |
| Manufacturer | Amp-future |
| Storage Temperature | -20°C |
| Kit Components | Enzymes, Buffers ,Reagents |
| Packaging | 48 Tests/box |
| Detection Limit | 500-1000copies/µL |
| Shipping | ICE |
| Test Time | 5-20mins |
Isothermal nucleic acid Applications
Suitable for RNA isothermal rapid amplification kit(NFO type)
Primer: Require pair of nucleotide primers with the length of 25-35 bp.
RNA NFO kit reaction temperature is 39 to 42℃ and time is 5-20 minutes.
Notes
1/ Please avoid nucleic acid contamination and set blank control during reaction due to the high sensitivity of the kit.
2/ Please take out the required quantity of MIRA reaction units for the experiment, and put the rest under storage conditions when performing the experiment.
Both high molecular weight DNA (greater than 1 kb in size; mostly cell associated) and the smaller DNA (150 – 250 bp; derived from the circulation) is effectively isolated and purified using a rapid and convenient spin column protocol. This kit can be used to isolate DNA from a broad range of viruses in urine as well. Salts, metabolic wastes, proteins and other contaminants are removed to yield inhibitor-free DNA for use in sensitive applications. The DNA is of excellent quality for various downstream applications such as PCR, qPCR and DNA fingerprinting, methylation studies and more.
This kit is fully compatible with Norgen’s Urine Collection and Preservation Tubes.
Urine DNA Isolation Kit
This kit provides a fast, reliable and simple procedure for isolating DNA from urine volumes ranging from 50 μL to 1.75 mL of urine. Multiple samples can be processed in 30 minutes.
Urine DNA Isolation Kit (Slurry Format)
This kit provides a fast, reliable and simple procedure for isolating DNA from urine volumes ranging from 3 mL to 25 mL. Multiple samples can be processed in 30 minutes. Multiple samples can be processed in 45 minutes.
Urine DNA Isolation Maxi Kit (Slurry Format)
This kit provides a fast, reliable and simple procedure for isolating DNA from urine volumes ranging from 25 mL of urine up to 80 mL. Multiple samples can be processed in 45 minutes.
Background
DNA found in urine can be divided into 2 basic categories. The larger species, genomic-DNA (gDNA), is generally greater than 1 kb in size, and appears to be derived mainly from exfoliated cells. The second species is smaller, generally between 150 and 250 bp (apoptotic-DNA), and derives, at least in part, from the circulation. The second species is also considered as an RNA/DNA hybrid as reported by Halicka et al. (2000). Both types of DNA can be isolated reliably using this kit.
Figure 1 / 8
Click for expanded view
| Kit Specifications – Spin Column | |
| Minimum Urine Input | 3 mL |
| Maximum Urine Input | 25 mL |
| Time to Complete 10 Purifications | < 30 minutes |
| Size of Urine DNA Purified | Large (> 1 kb) and small (150-250 bp) |
| Kit Specifications – 96-well | |
| Urine Input Volume | 3 – 25 mL |
| Elution Volume | 1st Elution 100 μL 2nd Elution 100 μL |
| Size of DNA Purified | Large (> 1 kb) and small (150-250 bp) |
| Time to Complete 96 Purifications | < 1 hour |
Storage Conditions and Product Stability
All buffers should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm up Slurry B1 and Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed. Slurry B1 contains a grey resin that will not dissolve when warmed.
| Component | Cat. 18100 (50 preps) | Cat. 48800 (50 preps) | Cat. 50100 (50 preps) |
|---|---|---|---|
| Binding Solution K | 15 mL | – | – |
| Slurry B1 | – | 18 mL | 18 mL |
| Proteinase K in Storage Buffer | 2 mL | – | – |
| Pronase K in Storage Buffer | 2 mL | – | – |
| Soluton WN | 9 mL | – | – |
| Binding Buffer A | – | – | 50 mL |
| Lysis Buffer A | – | 30 mL | 30 mL |
| Wash Solution A | – | 38 mL | 38 mL |
| Wash Solution B | 30 mL | – | – |
| Wash Solution D | 9 mL | – | – |
| Binding Solution K | 15 mL | – | – |
| Elution Buffer B | 15 mL | 15 mL | 15 mL |
| Micro Spin Columns | 50 | – | – |
| Mini Filter Spin Columns | – | 50 | 50 |
| Collection Tubes | 50 | 50 | 50 |
| Elution Tubes (1.7 mL) | 100 | 100 | 100 |
| Product Insert | 1 | 1 | 1 |