K-LATE

SKU: 700004310

50 assays (manual) / 500 assays (microplate) / 450 assays (auto-analyser)

Content:	50 assays (manual) / 500 assays (microplate) / 450 assays (auto-analyser)
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:	> 1 year under recommended storage conditions

Analyte:	L-Lactic Acid
Assay Format:	Spectrophotometer, Microplate, Auto-analyser
Detection Method:	Absorbance
Wavelength (nm):	340
Signal Response:	Increase
Linear Range:	0.3 to 30 µg of L-lactic acid per assay
Limit of Detection:	0.21 mg/L
Reaction Time (min):	~ 10 min
Application examples:	Wine, beer, soft drinks, milk, dairy products (e.g. cream, milk / whey powder, cheese, condensed milk and yogurt), foods containing milk (e.g. dietetic foods, bakery products, baby food, chocolate, sweets and ice-cream), egg, egg products (e.g. egg powder), baking additives, vinegar, fruit and vegetables, processed fruit and vegetables (e.g. tomatoes), meat products, food additives, feed, paper (and cardboard), cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.).
Method recognition:	Methods based on this principle have been accepted by DIN, GOST, IDF, EEC, EN, ISO, OIV, IFU, AIJN and MEBAK

The L-Lactic Acid (L-Lactate) Assay Kit is used for the specific measurement and analysis of L-lactic acid (L-lactate) in beverages, meat, dairy and food products.

Note for Content: The number of manual tests per kit can be doubled if all volumes are halved.  This can be readily accommodated using the MegaQuant^TM  Wave Spectrophotometer (D-MQWAVE).

Explore our complete list of organic acid assay kits.

Advantages

• Extended cofactors stability. Dissolved cofactors stable for > 1 year at 4^oC.
• Very competitive price (cost per test) 
• All reagents stable for > 2 years after preparation 
• Rapid reaction 
• Mega-Calc™ software tool is available from our website for hassle-free raw data processing 
• Standard included
• Suitable for manual, microplate and auto-analyser formats

The L-Lactic Acid (L-Lactate) Assay Kit is used for the specific measurement and analysis of L-lactic acid (L-lactate) in beverages, meat, dairy and food products.

Overview

• Sequentially purify total RNA (and miRNA), DNA and proteins from a single sample
• No sample splitting or need to use phenol or precipitation methods
• Purify RNA/DNA/Protein from cultured animal cells, tissues, blood, bacteria, yeast, fungi or plants
• Purification is based on spin column chromatography that uses Norgen’s proprietary resin separation matrix

RNA/DNA/Protein Purification Plus Kit

This kit provides a rapid method for the high throughput isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, or yeast. The kit employs two columns: 1) for gDNA purification and 2) for RNA purification utilizing Norgen’s resin columns (superior for the binding of all RNA sizes including miRNA). The proteins are also purified on the second column after RNA elution. The proteins are eluted in buffer and are ready for downstream application without any further clean up required. The proteins can be quantified directly, used in western blots, ELISA or mass spectrometry. This kit provides a rapid spin-column method for the isolation and purification of total RNA, genomic DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, yeast, fungi or plants.

RNA/DNA/Protein Purification Plus Micro Kit

This kit provides a rapid spin-column method for the isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, microdissected samples including LCM, stem cells, sorted cells, and CTC. The total RNA, genomic DNA and proteins are all column purified in less than 30 minutes. The RNA and DNA can be eluted in as little as 20 µL while the protein can be eluted in as little as 50 µL. This kit provides the same performance as if the samples were isolated from dedicated kits.

RNA/DNA/Protein Purification 96-Well Plus Kit

The kit employs two plates: 1) for DNA purification and 2) for RNA purification utilizing Norgen’s resin (superior for the binding of all RNA sizes including miRNA). Please see the protocol schematic below.

Details

Supporting Data

Figure 1 / 4

Previous

Next

Click for expanded view

Kit Specifications
Binding Capacity Per Well	50 μg for RNA 20 μg for DNA 150 μg for protein
Size of RNA Purified	All sizes, including small RNA (< 200 nt)
Size of DNA Purified	≥ 30 kb
Time to Complete 10 Purifications	35 minutes
Maximum Amount of Starting Material:Animal CellsAnimal TissuesBloodBacteriaYeastFungiPlant Tissues	1 x 106 cells10 mg100 µL1 x 109 cells1 x 108 cells40 mg40 mg
Average Yield* Liver (5 mg)	12.5 μg RNA 2 μg DNa  55 μg Protein

* average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage.

Storage Conditions and Product Stability
The Protein Loading Dye should be stored at -20°C after the addition of DL-Dithiothreitol (DTT).

Component	Cat. 47700 (50 preps)	Cat. 51600 (50 preps)	Cat. 51700 (96 preps)
Buffer SKP	40 mL	40 mL	–
Lysis Buffer Q	–	–	40 mL
Wash Solution A	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL
Elution Solution A	6 mL	6 mL	20 mL
Elution Buffer F	15 mL	15 mL	2 x 15 mL
Wash Solution C	30 mL	30 mL	60 mL
Binding Buffer A	8 mL	8 mL	8 mL
Elution Buffer C	8 mL	8 mL	30 mL
Protein Neutralizer	4 mL	4 mL	4 mL
Protein Loading Dye	2 mL	2 mL	3 x 2 mL
gDNA Purification Columns	50	–	–
gDNA Purification Micro Columns	–	50	–
gDNA Purification 96-Well Plate	–	–	1
RNA/Protein Purification Columns	50	–	–
RNA/Protein Purification Micro Columns	–	50	–
RNA/Protein Purification 96-Well Plate	–	–	1
Collection Tubes	150	150	–
Collection Plate	–	–	5
Elution Tubes (1.7 mL)	150	150	–
Elution Plate	–	–	3
Lysis Preparation Plate	–	–	2
Adhesive Tape	–	–	4
Product Insert	1	1	1

Introduction

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

1. The sample is highly infectious, posing great harm to operators and the environment.

2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;

3. Blood sample contains a large amount of impurities and inhibitory factors.

Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.

The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from tissue, whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from blood, tissue, culture cells, swab, blood spots using 96 plate
Applications	PCR, southern bolt and virus detection, etc
Purification method	96 well plate
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Blood, serum, plasma, milk, saliva, and other liquid samples and cultured cells
Sample amount
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column

Principle

This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• High throughput – 96 samples can be processed simultaneously

Kit Contents

Contents	D311701	D311702
Purification Times	1 x 96	4 x 96
HiPure gDNA Plate	1	4
96 well Plate (2.2ml)	1	4
1.6ml Collection Plate	1	4
0.5ml Collection Plate	1	4
Silicon Seal Tape	1	4
Seal Film	5	25
Buffer ATL	30 ml	100 ml
Buffer AL	30 ml	100 ml
Buffer DW1	60 ml	250 ml
Buffer GW2	50 ml	2 x 100 ml
Proteinase K	50 ml	200 ml
Protease Dissolve Buffer	5 ml	15 ml
Buffer AE	30 ml	120 ml

Storage and Stability

Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Purchase Guide

Name	CAT NO	Sample amount	Leukocyte protocol*	Colum type	Elutio volume	Average yield	Time per run
HiPure Blood DNA Mini Kit	D3111	10-200μl	1ml	2ml column	≥20μl	5-9μg/200μl	≤30 minutes
HiPure Tissue&Blood DNA Midi Kit	D3113	0.2-2ml	10ml	1.5ml column	≥300μl	20-40μg/1m	≤80 minutes
HiPure Tissue&Blood DNA Maxi Kit	D3115	3 -10ml	10ml	15ml column	≥700μl	20-40μg/1m	≤90 minutes
HiPure Tissue&Blood DNA 96 Kit	D3117	1-200μl	1ml	96 well plate		3-8μg/200μl

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples: