Cell Culture Flask 5 Layers

Opentrons OT-2 Tips, 1000µL. Optimized for volumes 100µL to 1000µL Clear Tips, Polypropylene. These tips are DNAse/RNAse, pyrogen and protease free – they are sterilized from ebeam irradiation. Not autoclavable.

Compatible with: Opentrons Single-Channel GEN1 P1000 Electronic Pipettes, Opentrons Single-Channel GEN2 P1000 Electronic Pipettes

Opentrons OT-2 Tips, 1000µL. Optimized for volumes 100µL to 1000µL Clear Tips, Polypropylene. These tips are DNAse/RNAse, pyrogen and protease free – they are sterilized from ebeam irradiation. Not autoclavable.

Compatible with: Opentrons Single-Channel GEN1 P1000 Electronic Pipettes, Opentrons Single-Channel GEN2 P1000 Electronic Pipettes

Overview

• Sequentially purify total RNA (and miRNA), DNA and proteins from a single sample
• No sample splitting or need to use phenol or precipitation methods
• Purify RNA/DNA/Protein from cultured animal cells, tissues, blood, bacteria, yeast, fungi or plants
• Purification is based on spin column chromatography that uses Norgen’s proprietary resin separation matrix

RNA/DNA/Protein Purification Plus Kit

This kit provides a rapid method for the high throughput isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, or yeast. The kit employs two columns: 1) for gDNA purification and 2) for RNA purification utilizing Norgen’s resin columns (superior for the binding of all RNA sizes including miRNA). The proteins are also purified on the second column after RNA elution. The proteins are eluted in buffer and are ready for downstream application without any further clean up required. The proteins can be quantified directly, used in western blots, ELISA or mass spectrometry. This kit provides a rapid spin-column method for the isolation and purification of total RNA, genomic DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, yeast, fungi or plants.

RNA/DNA/Protein Purification Plus Micro Kit

This kit provides a rapid spin-column method for the isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, microdissected samples including LCM, stem cells, sorted cells, and CTC. The total RNA, genomic DNA and proteins are all column purified in less than 30 minutes. The RNA and DNA can be eluted in as little as 20 µL while the protein can be eluted in as little as 50 µL. This kit provides the same performance as if the samples were isolated from dedicated kits.

RNA/DNA/Protein Purification 96-Well Plus Kit

The kit employs two plates: 1) for DNA purification and 2) for RNA purification utilizing Norgen’s resin (superior for the binding of all RNA sizes including miRNA). Please see the protocol schematic below.

Details

Supporting Data

Figure 1 / 4

Previous

Next

Click for expanded view

Kit Specifications
Maximum Column Binding Capacity	50 μg for RNA 20 μg for DNA 200 μg for protein
Maximum Column Loading Volume	650 μL
Size of RNA Purified	All sizes, including small RNA (< 200 nt)
Size of DNA Purified	≥ 30 kb
Maximum Amount of Starting Material: Animal Cells Animal Tissues Blood Bacteria Yeast Fungi Plant Tissues	5 x 106 cells 25 mg (for selected tissues) 100 μL 1 x 109 cells 1 x 108 cells 50 mg 50 mg
Time to Complete 10 Purifications	30 minutes
Average Yield:HeLa Cells (1 x 106 cells)HeLa Cells (1 x 106 cells)HeLa Cells (1 x 106 cells)	15 μg RNA8 μg DNA150 μg protein

 
Storage Conditions and Product Stability
The Protein Loading Dye should be stored at -20°C after the addition of DL-Dithiothreitol (DTT). All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.

Component	Cat. 47700 (50 preps)	Cat. 51600 (50 preps)	Cat. 51700 (96 preps)
Buffer SKP	40 mL	40 mL	–
Lysis Buffer Q	–	–	40 mL
Wash Solution A	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL
Elution Solution A	6 mL	6 mL	20 mL
Elution Buffer F	15 mL	15 mL	2 x 15 mL
Wash Solution C	30 mL	30 mL	60 mL
Binding Buffer A	8 mL	8 mL	8 mL
Elution Buffer C	8 mL	8 mL	30 mL
Protein Neutralizer	4 mL	4 mL	4 mL
Protein Loading Dye	2 mL	2 mL	3 x 2 mL
gDNA Purification Columns	50	–	–
gDNA Purification Micro Columns	–	50	–
gDNA Purification 96-Well Plate	–	–	1
RNA/Protein Purification Columns	50	–	–
RNA/Protein Purification Micro Columns	–	50	–
RNA/Protein Purification 96-Well Plate	–	–	1
Collection Tubes	150	150	–
Collection Plate	–	–	5
Elution Tubes (1.7 mL)	150	150	–
Elution Plate	–	–	3
Lysis Preparation Plate	–	–	2
Adhesive Tape	–	–	4
Product Insert	1	1	1

Overview

• Detection kits for RSV-A
• Available in TaqMan format for analysis

Norgen’s Respiratory Syncytial Virus A (RSV-A) TaqMan RT-PCR Detection Kit is designed for the detection of RSV-A specific RNA in a real-time PCR based on the use of TaqMan technology. This kit is designed for research use only and not for use in diagnostic procedures. The detection of RSV-A specific RNA is based on TaqMan one-step RT-PCR providing a simple, reliable and rapid result for the detection of RSV-A infection. Norgen’s TaqMan RT-PCR Kit includes a PCR control to monitor for PCR inhibition, and to validate the quality of the sample and the detection result. The RSV-A TaqMan RT-PCR Kit comprises Master Mix for the target and PCR control detection, Primer & Probe Mix, as well as a positive control and a negative control (nuclease-free water) to confirm the integrity of the kit reagents.

RSV-A TaqMan RT-PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

RSV-A TaqMan RT-PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s RT-PCR Master Mix (#28113) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 1 year after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. TM34250 (100 preps)	Cat. TM34210 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
RSV-A Primer & Probe Mix	280 μL	280 μL
RSV-A Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1