Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
Detail
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
The HiPure Mini system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Plasmid Mini Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of tris buffer or water.
Compared to other domestic products, Magen was the first to solve the stability problem of the column. Many other brands have unstable extraction concentrations, and the longer the time, the more unstable the column becomes. However, in our test of Magen kit, the quality and yield of plasmid extraction still remain stable after 5 years’ storage. For different customers, our kits can be customized. For example, Classic type is suitable for customers with low copy or unclear plasmid types. The rapid type is suitable for customers with high copy plasmids. Compared to many other brands, the plasmid DNA extracted by Magen has a longer preservation time and more thoroughly RNA removal.
Details
Specifications
Features
Specifications
Main Functions
Isolation up to 35μg plasmid DNA from 1-5ml bacterial culture
Applications
Enzyme digestion, sequencing, PCR, cloning, etc.
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Conventional plasmid, plasmid less than 30KB
Sample amount
High copy plasmid: 1-5ml culture mediumLow copy number plasmid : 5-10ml culture medium
Yield
5-35µg
Elution volume
≥30μl
Time per run
Complete 1-24 samples in 30 minutes
Liquid carrying volume per column
800µl
Binding yield of column
35µg
Principle
The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
Fast – it takes only 1 minute to obtain supernatant by optimized solution (10 minutes for other brands)
High yield – up to 35µg plasmid can be binded in one column
Kit Contents
Contents
P100102
P100103
Purification Times
100 Preps
250 Preps
RNase A
5 mg
10 mg
Buffer P1
30 ml
80 ml
Buffer P2
30 ml
80 ml
Buffer P3
40 ml
100 ml
Buffer PW1
60 ml
140 ml
Buffer PW2*
20 ml
50 ml
Elution Buffer
15 ml
30 ml
HiPure DNA Mini Columns II
100
250
2 ml Collection Tubes
100
250
Storage and Stability
The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.
The HiPure Mini system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Plasmid Mini Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of tris buffer or water.
m-PEG6-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Document
m-PEG6-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
