Overview

• Ensure optimal results for sensitive applications like NGS
• Up to a tenfold increase in microRNA mapping during sequencing runs to reduce costs
• Isolates all sizes of exosomal and extracellular vesicle RNA, including microRNA.
• Bind and elute all RNA irrespective of size or GC content, without bias.
• No phenol extractions.
• No Proteinase K treatment.
• No carrier RNA.
• Concentrate isolated RNA into a flexible elution volume ranging from 50 μL to 100 μL.
• Purify high-quality RNA in 15-20 minutes.
• Purified RNA is suitable for a variety of downstream applications, including Small RNA Sequencing.
• Purification is based on EXTRAClean spin column chromatography that uses Norgen’s proprietary separation matrix.

The kit is designed to isolate all sizes of RNA, including microRNA. The kit provides a clear advantage over other available kits in that it does not require any special instrumentation, protein precipitation reagents, extension tubes, phenol/chloroform or protease treatments. Moreover, the kit allows the user to elute into a flexible elution volume ranging from 50 μL to 100 μL. The purified RNA is of the highest integrity, and can be used in a number of downstream applications including real time PCR, reverse transcription PCR, Northern blotting, RNase protection and primer extension, and expression array assays.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Sample Type	Exosomes purified using Norgen’s Purification Kits
Size of RNA Purified	All sizes, including miRNA and small RNA (< 200 nt)
Elution Volume	50-100 μL
Time to Complete 10 Purifications	35-40 minutes
Average Yields	Variable depending on specimen

Storage Conditions and Product Stability
All buffers should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.

Introduction

MagPure Circulating DNA Rich Kit designed for purification of high quality circulating DNA (cfDNA) from cell-free body fluids (such as plasma, serum). The purified DNA is suitable for direct use in downstream applications such as PCR, real-time PCR, biochip analysis and NGS.

Details

Specifications

Features	Specifications
Main Functions	Rich small fragment cfDNA from 0.6ml serum plasma, remove DNA fragments＞500bp
Applications	qPCR, NGS, etc.
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Serum, plasma
Sample amount	0.6ml
Elution volume
Time per run

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysedand digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, Large DNA(>500bp) will be adsorbed on the surface of magBindparticles. After removal of large size, small size of DNA(<500bp) will be adsorbed on the surface ofMagPure Particle F and impurities such as proteins will be removed without adsorption. The adsorbedparticles were washed with washing solution to remove proteins and impurities, washed with ethanol toremove salts, and finally DNA

Advantages

• Economy – less than 50% of the price of Qiagen and other imported products
• Automatic – without labour

Kit Contents

Contents	1292750	12927200
Purification Times	50 preps	200 preps
MagPure Particles F	1.2 ml	4.5 ml
MagBind Particles	1.2 ml	4.5 ml
Proteinase K	24 mg	90 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer MLB	30 ml	120 ml
Buffer GDP	15 ml	60 ml
Buffer MAW1	40 ml	250 ml
Buffer MW2*	20 ml	50 ml
Elution Buffer	15 ml	60 ml

Storage and Stability

Proteinase K, MagBind Particles and MagPure Particles F should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

MagPure Circulating DNA Rich Kit designed for purification of high quality circulating DNA (cfDNA) from cell-free body fluids (such as plasma, serum). The purified DNA is suitable for direct use in downstream applications such as PCR, real-time PCR, biochip analysis and NGS.

Introduction

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.

Details

Specifications

Features	Specifications
Concentration	10 mg/ml
Appearance	Suspension of yellowish brown particles
Surface functional group	Carboxyl, COOH
Dispersibility	Monodisperse, spherical
Particle size	0.8-1 μm
Preservation conditions	Room temperature, valid for up to 2 years.It is recommended to store in 2-8°C to prevent microbial growth.
Magnetic response speed	120 seconds
Settling velocity	>2 hours
High salt mediated binding	No adsorption
Alcohol mediated binding	1M NaClO4/ethanol(50%), DNA/RNA recovery up to 90%
PEG8000 mediated binding	The recovery of DNA/RNA was up to 90%
DNase/RNase	Not detected
DNA residue	Not detected
Recommended application	Plasmid extraction, gel DNA recovery, genomic DNA extraction and RNA extraction.

Principle

Highsalt mediated binding: in the solution containing 2-4M guanidine isothiocyanate, Magpure particles can selectively recover DNA molecules, and impurities such as protein polysaccharides are not adsorbed.

Alcohol mediated binding: in the solution containing guanidine salt and alcohol (>25%), Magpure particles can selectively recover DNA/RNA molecules, and proteins and other impurities are not adsorbed.

After biological samples are treated with digestive solution or lysis Buffer, DNA/RNA is released from cells, organelles and protein complexes (ribosomes and nucleosomes) into reagents. After Magpure particles and binding solution are added, DNA/RNA is adsorbed to the surface of Magpure particles to form DNA/RNA bead complex. Under the action of the magnetic field, the magnetic beads are separated and collected, and the impurities such as protein are removed with the waste liquid. After two or three steps of further cleaning, the DNA/RNA magnetic bead complex is resuspended in sterilized water or TE buffer, and the DNA/RNA falls off from the surface of the magnetic beads, so as to achieve the purpose of purification.

Ordering information

CAT.No.	Product Name	Package
C14130	MagBind Particles	10 ml
C14131	MagBind Particles	100 ml

Purchase Guide

Features	MagPure Particles	MagPure Particles N	MagPure Particles G	MagPure Particles F	MagBind Particles
Cat.No.	C1410	C1411	C1412	C1414	C1413
Concentration	100mg/ml	70mg/ml	40mg/ml	50mg/ml	10mg/ml
Form	Amorphous and Porous	Amorphous and Porous	Porous	Amorphous	Nonporous
Surface function	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	COOH, Carboxyl Beads
Dispersion	Polydisperse	Polydisperse	Monodisperse	Monodisperse	Monodisperse
Particle Size	1.5-5μm	0.2-2μm	1-1.5μm	0.2-1.5μm	0.8-1μm
Color	Black	Yellowish Brown	Dark Brown	Dark Brown	Yellowish Brown
Magnetic response	15-30s	~60s	~30s	20s	120s
Settling Time (1ml)	>5min	>10min	>3min	>3min	>2h
Usage (0.2ml Sample)	20μl	20μl	20-30μl	20-30μl	20-30μl
DNA Recover Rate (only 4M GITC)	>80%	>80%	>80%	>80%	0
DNA Recover Rate (10% PEG8000/NaCl)	>85%	>85%	>85%	>85%	>90%
Recommended Use	gDNA/RNA Isolation from Blood, Tissue, Plant, Swab, Spots, Stool, Soil and etc.Viral DNA/RNA IsolationAgarose Gel DNA Purification	DNA/RNA Isolation from low nucleic acid content samplesPlasmid IsolationDNA/RNA Clean Up	Circulating DNA IsolationViral Nucleic acid IsolationgDNA Isolation FFPE DNA/RNA Isolation	Plasmid extractiongel DNA recoverygenomicDNA/RNA extraction viral nucleic acid extractionCirculating DNA extraction	DNA/RNA Clean Up and concentrationDNA/RNA Isolation from low nucleic acid content samplesResearch immuno assays

• The MagPure magnetic-particle technology combines the speed and efficiency of silica-based DNA purification with the convenient handling of magnetic particles. DNA binds to the silica surface of the magnetic particles in the presence of a chaotropic salt. DNA bound to the particles is then efficiently washed, considerably improving the purity of DNA. High-quality DNA is eluted. The automated purification procedure completely removes enzymes, nucleotides, and other contaminants and inhibitors. Purified DNA is suitable for direct use in downstream applications, such as sequencing and microarray analysis.

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.