Permagen’s 24-Well magnetic separation plate was designed specifically for large volumes either manually or on a robotic platform. Dual ring magnet feature provide a ring of beads leaving the well bottoms clean for easy removal
Detail
Permagen’s 24-Well magnetic separation plate was designed specifically for large volumes either manually or on a robotic platform. Dual ring magnet feature provide a ring of beads leaving the well bottoms clean for easy removal
SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
This product provide fast and easy methods for purification of total DNA from whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 40 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
This kit can use on manual protocol or 16/32/48 channel automated extraction system. No need to pause for the addition of binding solution (not applicable to 96/192 instruments)
Details
Kit Contents
Contents
D631001C
D631002C
D631003C
Purification Times
48
96
480
MagPure Particles
1.7 ml
3.5 ml
16 ml
Proteinase K
24 mg
50 mg
220 mg
Protease Dissolve Buffer
1.8 ml
3 ml
15 ml
Buffer MLA
30 ml
70 ml
300 ml
Buffer DW1
30 ml
70 ml
300 ml
Buffer EW
60 ml
120 ml
2 x 300 ml
Buffer MWX1
30 ml
70 ml
300 ml
Elution Buffer
10 ml
20 ml
60 ml
Prefilled Kit Contents
Product
Contents and volume
D6310-TL-06C
D6310-S-48
Proteinase K
50 mg
24 mg
Protease Dissolve Buffer
3 ml
1.8 ml
TL-Tip
12 pcs
24 pcs
Tip bottom plate/ Tip base reagent strip
Row 1/7：600μl Buffer MLA
6 plates
48 strips
Row 2/8：600μl Buffer MWX1
Row 3/9：600μl Buffer DW1
Row 4/10：30μl MagPure Particles 600μl Buffer EW
Row 5/11：600μl Buffer EW
Row 6/12：100μl Elution Buffer
Storage and Stability
Proteinase K Powder should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these condition.
Document
This product provide fast and easy methods for purification of total DNA from whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 40 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
D-Glucose
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
510
Signal Response:
Increase
Linear Range:
4 to 100 μg of glucose per assay
Limit of Detection:
40 mg/L
Reaction Time (min):
~ 20 min
Application examples:
Wine, beer, fruit juices, soft drinks, milk, jam, dietetic foods, bakery products, candies, fruit and vegetables, tobacco, cosmetics, pharmaceuticals, feed, paper and other materials (e.g. biological cultures, samples, etc.).
Method recognition:
Widely used and accepted in clinical chemistry and food analysis
The D-Glucose test kit contains high purity reagents for the measurement and analysis of D-glucose in cereal extracts and for use in combination with other Megazyme kits.
All reagents stable for > 12 months after preparation
Very competitive price (cost per test)
Simple format
Standard included
Document
The D-Glucose test kit contains high purity reagents for the measurement and analysis of D-glucose in cereal extracts and for use in combination with other Megazyme kits.
resDNASEQ E.coli Residual DNA Quantitation kit (Without DNA Control)
Product Info
Document
Product Info
Description
Features of the sDNASEQ E.coli Residual DNA
Quantitation kit include:
Simpler and Rapid
Only three steps will be need for Sample Preparation and All components of the Sample Preparation Kit can be stored at room temperature.
Only one Reagent for qPCR;
Only 1.5 hours will be needed for the whole test.
Accurate
Perfect amplification curve, good amplification efficiency and good precision.
Highly sensitive quantitation using proven TaqMan™ real-time qPCR technology.
Limit of Detection (LOD): 1 pg/mL; Limit of Quantification (LOQ): 5 pg/mL
The recovery rate of different concentration samples in the linear range is between 70% and 130%
Kit Performance
Fig 1. Only three steps will be need for Sample Preparation and only 20 minitutes will be taken for Sample Preparation.
Fig 2. Seven concentration samples of 5fg/μL, 10fg/μL, 20fg/μL, 30fg/μL, 300fg/μL, 3pg/μL, 30pg/μL, 300pg/μL were detected. CV of each concentration was < 30%, Regression coefficient associated with standard solutions was 0.99975, and amplification efficiency was 100.068%.
Fig 3. Four concentration samples of 5fg/μL, 10fg/μL, 20fg/μL, and 30fg/μL were detected, and 10 multiple holes were detected for each concentration. The detection values of 5fg/μL and above were CV ＜30%.
Fig 4. DNA recovery can be determined by including samples spiked with known DNA amounts which are prepared from the corresponding DNA standards. Typically, the range for this value varies from 70% to 130%.
Fig 5. Only one Reagent for qPCR MIX.
Document
Note: Price not include shipment & duty, contact us to get full quote.
The resDNASEQ E.coli Residual DNA Quantitation kit is designed for the quantification of residual DNA from E. coli, in cell lines which are used for production of biopharmaceutical products. The resDNASEQ E.coli Residual DNA Quantitation kit use TaqManTM quantitative PCR to perform rapid, specifc quantitation of femtogram levels of residual host-cell or plasmid DNA. The kit was developed to meet the sensitivity requirements defined by WHO (10 ng E. coli DNA per therapeutic dose).
