Phytic Acid Assay Kit

Overview

• All-in-one solution for inclusion body protein isolation and purification
• Fast and convenient spin column protocol
• Complete kit with Cell Lysis Reagent, Inclusion Body Solubilization Reagent, buffers and spin columns to purify proteins
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits provide everything required to isolate and purify inclusion body proteins from induced bacterial cultures. First a proprietary Cell Lysis Reagent is used to selectively lyse the cells and release inclusion bodies in their solid form. Next, inclusion bodies are dissolved and their contents released using the provided IB Solubilization Reagent. Inclusion body proteins are then further purified using spin columns for rapid and convenient buffer exchange and desalting. This kit provides a convenient way to screen recombinants prior to scaling up.

ProteoSpin™ Inclusion Body Protein Isolation Micro Kit

The process is efficient and streamlined and can process up to 12 samples in only 60 minutes. Each spin column is able to recover up to 50 µg of acidic or basic proteins. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

ProteoSpin™ Inclusion Body Protein Isolation Maxi Kit

The procedure is efficient and streamlined and can process up to 4 samples in approximately 2 hours. Each spin column is able to recover up to 12 mg of acidic or basic proteins from 100 mL of induced bacterial culture. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

About Inclusion Bodies

Bacteria are widely used for the expression of different proteins. However, 70-80% of the proteins expressed in bacteria by recombinant techniques are typically contained in insoluble inclusion bodies (i.e., protein aggregates). The protein of interest found in these subcellular structures is often inactive, due to incorrect folding. The production rate of recombinant proteins stored in inclusion bodies is invariably higher than those synthesized as soluble proteins. The reason behind this is thought to be the resistance of insoluble proteins to proteolysis by cellular enzymes. In addition, separation of insoluble recombinant proteins in inclusion bodies is considerably easier than that of soluble proteins. These factors have been the major influences favoring scale-up of high-value proteins using bacterial fermentation for example. Procedures for the purification of the expressed proteins from inclusion bodies are often labour-intensive, time-consuming and not cost-effective. This kit provides the essential reagents for cell disruption, inclusion body solubilization and purification using spin column chromatography – all optimized to work together thereby simplifying the process and saving a tremendous amount of time and cost.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications
Maximum Culture Volume	100 mL
Yield from 100 mL of Culture	Up to 12 mg
Minimum Elution Volume	4 mL
Time to Process 1 Sample	1 hour

Storage Conditions
The Cell Lysis Reagent and IB Solubilization Reagent should be stored at 4°C upon receipt of this kit. This kit is stable for 2 years after the date of shipment. Once opened, the solutions should be stored at 4°C when not in use except for Binding Buffer C and Binding Buffer N. Some precipitation will occur with 4°C storage. This precipitation should be dissolved with slight heating to room temperature before using.

Component	Cat. 10300 (Micro – 25 preps)	Cat. 17700 (Maxi – 4 preps)
Wash Solution C	30 mL	130 mL
Wash Solution N	30 mL	130 mL
Binding BUffer A	4 mL	20 mL
Binding Buffer N	4 mL	20 mL
Elution Buffer C	8 mL	2 x 30 mL
Protein Neutralizer	4 mL	4 mL
Cell Lysis Reagent	15 mL	110 mL
IB Solubilization Reagent	2 mL	50 mL
Syringes, 1cc, slip tip	25	–
Needles (Bev, 20G x 1 inch)	25	–
Syringes, 10 mL, Luer-Lok™ Tip	–	4
Needles (18G x 1.5 inch)	–	4
Micro Spin Columns	25	–
Maxi Spin Columns (filled with SiC) inserted into 50 mL collection tubes	–	4
Collection Tubes	25	–
Elution Tubes (1.7 mL)	25	–
Elution Tubes (50 mL)	–	4
Product Insert	1	1

Tri(propargyl-PEG5-NHCO-ethyloxyethyl)amine is a click chemistry branched linker. The propargyl groups can react with azide-bearing molecules via copper catalyzed Click Chemistry.

Tri(propargyl-PEG5-NHCO-ethyloxyethyl)amine is a click chemistry branched linker. The propargyl groups can react with azide-bearing molecules via copper catalyzed Click Chemistry.

Overview

• CE-IVDR marked in accordance with the European Commission Regulation (EU) No. 2017/746.
• Ideal for use in in vitro diagnostic workflows
• Simultaneous isolation of both host RNA and microbial RNA (universal protocol)
• Isolate full diversity of RNA from large RNA down to small and microRNAs
• Eliminates PCR inhibitors including humic acids
• High quality RNA for sensitive downstream applications

This kit provides a convenient and rapid method to purify total RNA from small amounts of stool samples. All types of stool samples can be processed with this kit, including animal fecal samples, manure and samples collected using Norgen’s Stool Nucleic Acid Collection and Transport Devices Dx (Cat. Dx45660). The kit removes all traces of humic acids using rapid and simple spin column procedures. Bead tubes are also provided for effective homogenization of stool. The kit purifies all sizes of RNA, from large mRNA and ribosomal RNA down to microRNA and small interfering RNA. Both host and microbial RNA is recovered. The protocol does not rely on the use of phenol or chloroform, thereby providing a user friendly procedure and allowing high-throughput analysis. The purified RNA is of the highest integrity, and can be used in a number of downstream applications including real time PCR and reverse transcription PCR for gene expression analysis. The procedure can be completed in approximately 30 minutes.

NOTE: This product is not available for sale in the United States.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Kit Specifications
Maximum Stool Input	200 mg
Type of Stool Processed	Frozen and fresh stool
Maximum Column Binding Capacity	50 μg
Maximum Column Loading Volume	650 μL
Time to Complete 10 Purifications	30 minutes

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.

Component	Cat. Dx49500 (50 preps)
Lysis Solution	60 mL
Wash Solution	22 mL
Elution Buffer	6 mL
Bead Tubes	50
Spin Columns	50
Collection Tubes	50
Elution Tubes (1.7 mL)	50
Product Insert	1