Lateral flow strips designed to detect a biotin and FITC/FAM labelled amplicon. Milenia Genline HybriDetect 1 (PDF 276 KB) lateral flow strips can be used to detect amplification products generated when using a TwistAmp® nfo kit in combination with a TwistAmp® nfo probe and labelled amplification primer.
Detail
Lateral flow strips designed to detect a biotin and FITC/FAM labelled amplicon. Milenia Genline HybriDetect 1 (PDF 276 KB) lateral flow strips can be used to detect amplification products generated when using a TwistAmp® nfo kit in combination with a TwistAmp® nfo probe and labelled amplification primer.
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
D-Fructose, D-Glucose
Assay Format:
Spectrophotometer, Microplate, Auto-analyser
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Increase
Linear Range:
4 to 80 µg of D-glucose, D-fructose or sucrose per assay
Limit of Detection:
0.66 mg/L
Reaction Time (min):
~ 13 min
Application examples:
Wine, beer, fruit juices, soft drinks, milk, jam, honey, dietetic foods, bread, bakery products, candies, desserts, confectionery, ice-cream, fruit and vegetables, condiments, tobacco, cosmetics, pharmaceuticals, paper and other materials (e.g. biological cultures, samples, etc.).
Method recognition:
Methods based on this principle have been accepted by AOAC Method 985.09, EN, NEN, NF, DIN, GOST, OIV, IFU, AIJN, MEBAK and IOCCC
D-Fructose/D-Glucose test kit, an enzymatic UV-method for the measurement and analysis of D-fructose and/or D-glucose in plant and food products.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
High quality DNA is suitable for sensitive downstream applications including PCR, qPCR, sequencing, SNP analysis, microarrays, RFLP and Southern Blot Analysis
Norgen’s Saliva DNA Collection and Preservation Devices are designed for 1) simple and non-invasive saliva collection and 2) preservation of DNA in saliva samples at ambient temperature. Each of the 50 Saliva DNA Collection and Preservation Devices consists of 3 components:
Saliva Collection Funnel and Collection Tube
Collection Tube Cap
Norgen’s Saliva DNA Preservative contained within a sealed squeezable ampoule
Saliva samples are collected by spitting inside the Collection Funnel which has been assembled with the Collection Tube. After collecting the required volume of saliva the Collection Funnel is removed and the contents of the Preservative Ampoule are then added and mixed with the collected saliva. The Saliva Collection Tube is subsequently sent to the laboratory for DNA isolation and analysis. DNA can be isolated from the preserved saliva samples using Norgen’s Saliva DNA Isolation Kit (Cat. RU45400). Each of Norgen’s Collection Tubes is labeled with a unique serial number that can be used for secure and anonymous tracking of the sample. The saliva DNA in preserved samples is stable for more than 2 years at room temperature. This kit is ideal for collecting and preserving DNA samples for epidemiological and population studies.
Saliva DNA Preservative
Norgen’s Saliva DNA Preservative is an aqueous storage buffer designed for rapid cellular lysis and subsequent preservation of DNA from fresh specimens. The buffer prevents the growth of Gram-negative and Gram-positive bacteria and fungi, and also inactivates viruses allowing the resulting non-infectious samples to be handled and shipped safely. In addition, the buffer eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperature. The components of the buffer allow samples to be stored for more than 2 years without any detectable DNA degradation.
When stored at room temperature, unused Norgen Saliva Preservative Tubes are stable through to the collect-before date without any reduction in performance. Please see the device insert or tube label for collect-before date.
Once collected, saliva is stable for more than 2 years when kept tightly sealed and stored at room temperature.
The Collection Tube, the Collection Funnel and the Device Container of each Individual Saliva DNA Collection and Preservation Device are recyclable.
Kit Components
Cat. RU49000 (50 Devices)
Individual Saliva DNA Collection and Preservation Devices
50
Donor Procedure Flowchart
1
Product Insert
1
Individual Saliva DNA Collection and Preservation Device Contents
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
Glucuronoyl Esterase
Assay Format:
Spectrophotometer, Auto-analyser
Detection Method:
Absorbance
Wavelength (nm):
400
Signal Response:
Increase
Reproducibility (%):
~ 3%
Total Assay Time:
10 min
Application examples:
Fermentation broths, industrial enzyme preparations and biofuels research.
Method recognition:
Novel method
The Glucuronoyl Esterase Assay Kit provides a simple robust method for the measurement of glucuronoyl esterase. The assay kit employs a novel colourimetric reagent, termed GEUX3 that is highly specific for glucuronoyl esterase.
The Glucuronoyl Esterase Assay Kit provides a simple robust method for the measurement of glucuronoyl esterase. The assay kit employs a novel colourimetric reagent, termed GEUX3 that is highly specific for glucuronoyl esterase.