Techinical parameter

ltem No	SH7006	SH9006	SH9009
Ice condenser capacity	6kg	6kg	9kg
Ice condenser temperature	-70℃	-90℃	-90℃
Chamber volume	12L	15L
Freeze dried chamber	Square cavity/front door opening/door opening angle up to 180 degrees
Sample shelf	·Stainless steel template partition● Electric heating/optional
Vacuum pump	Extreme vacuum5*10mbar ,with a pumping capacity of 8m³/hbuilt-in to the host/optional for various types of pumps
Oil mist filter	Standard configuration
Vacuum pump connection pipe	Cold trap,condensing coil/all equipped with PTFE anti-corrosion treatment as standard. Freeze-drying organic solvents
Anti-corrosive treatment	Single forming stainless steel flexible pipe DN16 ISO-KF L-1.2m
Fxternal valve	12 ports/optional	1-48 ports/optiona
Eutectic point detection system	Support/Optional
Data export analysis	Support/Optional
Power	0.95kw	1.65kw
Size	700*580*1600mm

Model:
SH7006,SH9006,SH9009

Brand:
Yingtai

Introduction

The HiPure Mini system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Plasmid Mini Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of tris buffer or water.

Compared to other domestic products, Magen was the first to solve the stability problem of the column. Many other brands have unstable extraction concentrations, and the longer the time, the more unstable the column becomes. However, in our test of Magen kit, the quality and yield of plasmid extraction still remain stable after 5 years’ storage. For different customers, our kits can be customized. For example, Classic type is suitable for customers with low copy or unclear plasmid types. The rapid type is suitable for customers with high copy plasmids. Compared to many other brands, the plasmid DNA extracted by Magen has a longer preservation time and more thoroughly RNA removal.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 35μg plasmid DNA from 1-5ml bacterial culture
Applications	Enzyme digestion, sequencing, PCR, cloning, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Conventional plasmid, plasmid less than 30KB
Sample amount	High copy plasmid: 1-5ml culture mediumLow copy number plasmid : 5-10ml culture medium
Yield	5-35µg
Elution volume	≥30μl
Time per run	Complete 1-24 samples in 30 minutes
Liquid carrying volume per column	800µl
Binding yield of column	35µg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – it takes only 1 minute to obtain supernatant by optimized solution (10 minutes for other brands)
• High yield – up to 35µg plasmid can be binded in one column

Kit Contents

Contents	P100102	P100103
Purification Times	100 Preps	250 Preps
RNase A	5 mg	10 mg
Buffer P1	30 ml	80 ml
Buffer P2	30 ml	80 ml
Buffer P3	40 ml	100 ml
Buffer PW1	60 ml	140 ml
Buffer PW2*	20 ml	50 ml
Elution Buffer	15 ml	30  ml
HiPure DNA Mini Columns II	100	250
2 ml Collection Tubes	100	250

Storage and Stability

The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2-8°C.

Experiment Data

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Mini system provides a fast, simple, and cost-effective plasmid DNA miniprep method for routine molecular biology laboratory applications. HiPure Plasmid Mini Kits use silica membrane technology to eliminate the cumbersome steps associated with loose resins or slurries. Plasmid DNA purified with Mini Kits is immediately ready for use. Phenol extraction and ethanol precipitation are not required, and high quality plasmid DNA is eluted in a small volume of tris buffer or water.