Introduction

HiPure FFPE Nucleic acid Kit supplies a simple and rapid DNA extraction for formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 20 minutes (not including digestion time). DNA can be directly used for downstream applications such as PCR, southern blot and viral DNA detection, etc.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from FFPE tissue samples
Applications	PCR, southern blot and viral DNA detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples
Sample amount	<20mg
Elution volume	>15µl
Time per run	≤20 minutes
Liquid carrying volume per column	4ml
Binding yield of column	100μg

Principle

Hipure FFPE Nuclear acid kit adopts silica gel column purification. The sample is deparaffinated by xylene and digested by lysate and protease. After de crosslinked at 90 ℃, DNA/RNA is released into the lysate. Adding ethanol to adjust the binding conditions, the sample is transferred to the column where DNA/RNA is adsorbed on the membrane and protein is removed without adsorption. Protein and other impurities are washed by buffer GW1, and the salt is removed by buffer GW2. Finally, the DNA / RNA is eluted by low salt buffer.

Advantages

• Safety – deparaffinating without contacting with xylene or other toxic solution
• Fast – without overnight incubation and digestion, several samples can be extracted within 2hours
• High efficiency -remove the formaldehyde modification of DNA, greatly enhancing the sensitivity of PCR

Kit Contents

Contents	D312602	D312603
Purification Times	50 Preps	250 Preps
HiPure DNA Mini Columns I	50	250
2ml Collection Tubes	50	250
Buffer DPS	30 ml	150 ml
Buffer ATL	15 ml	60 ml
Buffer AL	15 ml	60 ml
Buffer GW1*	22 ml	88 ml
Buffer GW2*	12 ml	50 ml
Proteinase K	24 mg	120 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer AE	10 ml	30 ml

Storage and Stability

Proteinase K should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Experiment Data

HiPure FFPE Nucleic acid Kit supplies a simple and rapid DNA extraction for formalin-fixed, paraffin-embedded (FFPE) tissue and sections samples. This kit is based on silica gel column purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction only takes 20 minutes (not including digestion time). DNA can be directly used for downstream applications such as PCR, southern blot and viral DNA detection, etc.

Overview

Adhesive film with 96 optically clear windows. This seal is peelable, suitable for qPCR and optical applications.

• These unique seals combine the strong sealing integrity of our QuickSeal PCR Seal with improved optical properties, thanks to the 96 adhesive-free windows
• The seal is made of a durably transparent polyester film, and a strong adhesive is applied across the seal, apart from the 96 round windows
• The QuickSeal qOptic seal is recommended for qPCR and other optical applications, such as fluorescence or colorimetric measurements
• For all adhesive seals, the best sealing results are achieved using our Hand Roller or KAPS 500 Auto Sealer

Adhesive film with 96 optically clear windows. This seal is peelable, suitable for qPCR and optical applications.

K-ARAB

100 assays per kit

Content:	100 assays per kit
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:	> 2 years under recommended storage conditions

Analyte:	Arabinan
Assay Format:	Spectrophotometer
Detection Method:	Absorbance
Wavelength (nm):	340
Signal Response:	Increase
Limit of Detection:	1.3 mg/L
Reaction Time (min):	~ 70 min
Application examples:	Fruit juices and other materials.
Method recognition:	Novel method

This product has been discontinued (read more).

The Arabinan test kit is suitable for the measurement and analysis of Arabinan in fruit juice concentrates.

View all of our polysaccharide assay kits.

Advantages

• Very rapid reaction due to inclusion of galactose mutarotase (patented technology) 
• Very cost effective 
• All reagents stable for > 2 years after preparation 
• Only enzymatic kit available 
• Very specific 
• Simple format 
• Mega-Calc™ software tool is available from our website for hassle-free raw data processing 
• Standard included

The Arabinan test kit is suitable for the measurement and analysis of Arabinan in fruit juice concentrates.