4x300ml Angle Rotor 

K-FRUC

SKU: 700004285

100 assays per kit

Content:	100 assays per kit
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:	> 2 years under recommended storage conditions

Analyte:	Fructan
Assay Format:	Spectrophotometer
Detection Method:	Absorbance
Wavelength (nm):	410
Signal Response:	Increase
Linear Range:	2.3 to 55 µg of D-fructose or D-glucose per assay
Limit of Detection:	0.16 g/100 g
Total Assay Time:	~ 90 min
Application examples:	Flours, infant formula, animal feed, pet foods, plant materials (e.g. onion), food products and other materials
Method recognition:	AACC Method 32-32.01, AOAC Method 999.03, AOAC Method 2016.14, AOAC Method 2018.07 and CODEX Method Type III

The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).

New, improved procedure.

In the most recent development, a recombinant endo-levanase has been incorporated into the fructanase mixture, extending the use of the method to the measurement of levan-type fructans as are present in grasses such as timothy, cocksfoot, ryegrass and red fescue.

The method described in this booklet employs ultra-pure, recombinant enzymes and specifically measures fructans including inulin-type fructans from chicory, dahlia, jerusalem artichoke; highly branched fructans from onion and wheat stems and leaves; and levan-type fructans from pasture grasses such as timothy grass. The enzymes employed are completely devoid of contaminating enzymes active on β-glucan or gluco-oligosaccharides.

Browse our full range of polysaccharide assay kits.

Validation of Methods

Advantages

• Very cost effective 
• All kit reagents stable for > 2 years after preparation 
• Unaffected by high sucrose / reducing sugar concentrations  
• Fructan kits are only available from Megazyme 
• Simple format 
• Mega-Calc™ software tool is available from our website for hassle-free raw data processing 
• Standard included

The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).

The Permagen 384-well post magnet plate was designed for use in manual or automation applications for Low Elution high throughput PCR 

Magnetic beads are pulled midway up onto well wall to help eliminate accidental bead pellet disruption and to achieve lower volumes

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, compatible with any magnetic beads, and integrated cushion base to help aid in robot/ consumable inconsistencies

SKU #

MSP384LE

Features

• SBS/ SLAS footprint
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• High throughput applications 
• Magnets sit lower on wells allowing lower volumes
• Made in USA 
• For Research use only

Compatibility

• Full- skirt 384 well PCR plates
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volumes

Maximum  – 39 µL 

Minimum  – 5 µL

The Permagen 384-well post magnet plate was designed for use in manual or automation applications for Low Elution high throughput PCR

The series of DNA Size Selection Kits (Magnetic Beads) were developed for DNA size selection using magnetic beads. A total of 11 kits are available, with different selection ranges spanning from 50 bp to over 10 kb. The kits provide a simple and quick approach for the enrichment of a specific range of DNA fragments. The kit workflow allows double-sided or single-sided size selection for specific size cutoffs.

Gel images of different ranges of size selection. Sheared human genomic DNA was used as input.

.

DNA size selection is a selective capture of DNA fragments of a specific range of size for next-generation sequencing (NGS) library preparations, PCR, ChIP assay, DNA ligations, endonuclease digestions, adapter removal, and other genomics and molecular biology applications. DNA size selection is preferred after NGS library prep in most of the cases. The NGS library preparation is related to the quality of the sequencing data. Precise NGS library size selection can increase sequencing efficiency, improve data quality, and reduce costs.

There are two types of sequencing technologies: short-read sequencing and long-read sequencing. Short-read sequencing uses DNA libraries that contain small insert DNA fragments of similar sizes, usually several hundred base pairs. The sequencing efficiency can be improved if the DNA size selection is in the right range. Cat.# 20104S and 20104L are the best kits for NGS library size selection of illumina paired-end 100 (PE100) sequencing with 100-200 bp library inserts; Cat.# 20105S and 20105L are the best kits for NGS library size selection of illumina paired-end 150 (PE150) sequencing with 150-300 bp library inserts; and Cat.# 20106S and 20106L are the best kits for NGS library size selection of illumina paired-end 300 (PE300) sequencing with 300-600 bp library inserts.

Long-read sequencing uses a large DNA fragment as input and makes very long reads. Usually, library size selection is preferred to remove smaller fragments. Cat.# 20110S and 20110L are the best kits for long-read sequencing size selection with DNA sizes >5 kb, and Cat.# 20111S and 20111L are the best kits for long-read sequencing size selection with DNA sizes >10 kb.

The magnetic beads technology uses paramagnetic particles, also known as SPRI (Solid Phase Reversible Immobilization) beads, to bind DNA reversibly and selectively. DNA fragments can be size-selected and purified by changing the properties of the magnetic beads or SPRI beads. The magnetic beads can easily separate the beads-binding DNA from the contaminants and unwanted components in the samples. The samples after DNA size selection are free of contaminants such as buffer components, enzymes, proteins, salts, dNTPs, primers, and adapters. Our proprietary magnetic beads reagents improve yield, selectivity, and reproducibility.

Specific DNA fragments at a certain length range can be purified simply using magnetic separation with different beads components, avoiding tedious and time-consuming gel extraction and column-based purification. The magnetic beads method is popular for common DNA size selection, including library size selection. The first beads-binding step, referred to as the right-side clean-up, removes large DNA fragments. The large DNA fragments are bound to the beads and are discarded. The desired DNA fragments in the supernatant are transferred to a new well, and new beads are added to the supernatant for the second beads-binding, referred to as the left-side clean-up. The double-size selected DNA fragments are eluted after ethanol rinsing.

DNA size selection with dual clean-ups.

.

A single clean-up is needed for DNA size selection with large fragments. In this case, only the large DNA fragments are bound to the beads. The selected larger DNA fragments are eluted after ethanol rinsing.

DNA size selection with single clean-up for >5 kb and >10 kb DNA.

.

Features of DNA size selection and library size selection

• • • High specificity and high recovery of size selection
    • 11 selection ranges are available, including 5 ranges for NGS library size selection
      • • 50-100 bp
        • 100-200 bp
        • 200-500 bp
        • 250-350 bp: ideal for illumina PE100 sequencing
        • 300-450 bp: ideal for illumina PE150 sequencing
        • 450-750 bp: ideal for illumina PE300 sequencing
        • 500-1000 bp
        • 1-3 kb
        • 1-5 kb
        • >5 kb: ideal for long-read sequencing
        • >10 kb: ideal for long-read sequencing
    • Fast and simple
      • • 20-min protocol
        • No gel purification required
        • No columns required
        • No centrifugation required
    • Efficient removal of contaminants and unwanted components