Introduction

This product is suitable for rapid extraction of DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from blood, buffy coat, tissue and other samples
Applications	Second generation sequencing, PCR, real time PCR, etc.
Purification method	Polydisperse magnetic beads
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Anticoagulant blood, concentrated blood, buffy coat, lymphocytes and cultured cells
Sample amount	Whole blood :< 200μl; Saliva / swab:< 400μl; Tissue :< 20mg
Yield	0.1 – 50μg
Elution volume
Time per run

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

• High purity – OD 260 / 280 : 1.7- 1.9, OD 260 / 230 : 1.5 – 2.0
• Economy – less than 50% of the price of Qiagen and other imported products
• High yield – most optimal process, ensuring the recovery up to 90%
• Strong processing ability – samples including animal blood, cultured cells, animal tissues, etc.

Kit Contents

Contents	IVD3102
Purification Times	200
MagPure Particles	5 ml
Proteinase K	100 mg
Protease Dissolve Buffer	10 ml
Rnase A	40 mg
Buffer ATL	60 ml
Buffer AL	60 ml
Buffer BD*	20 ml
Buffer BW1*	110 ml
Elution Buffer	30 ml

Cat.No	Reagent	IVD3102-F-96
Proteinase K		50 mg
Protease Dissolve Buffer		6 ml
RNase A		20 mg
Buffer ATL		30 ml
Buffer AL		30 ml
96-Tip		1
Sample plate (DW Plate)	450µl Buffer BD(Ethanol Added)	1
Wash 1 Plate (DW Plate)	600µl Buffer BW1(Ethanol Added)	1
Wash 2 Plate (DW Plate)	600µl Buffer BW1(Ethanol Added)	1
Wash 3 Plate (DW Plate)	750µl Buffer GW2, 20µl MagPure Particle	1
Elution plate (DW Plate)	80µl Elution Buffer	1

Cat.No	Reagent	IVD3102-TL-06
Proteinase K		50 mg
RNase A		20 mg
Protease Dissolve Buffer		6 ml
Buffer ATL		40 ml
Buffer AL		40 ml
AS-Tip		12
2.0ml V-bottom plate	Row 1/7：450µl Buffer BDRow 2/8：450µl Buffer BW1Row 3/9：450µl Buffer BW1Row 4/10：20μl Magpure Particle450μl Wash Buffer GW2 Row 5/11：450μl Wash Buffer GW2 Row 6/12：80µl Elution Buffer	6

Storage and Stability

Proteinase K, RNase A, MagPure Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Experiment Data

This product is suitable for rapid extraction of DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has  you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.

Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads 

SKU #

A040523

A040523KT (Kit for 0.2 ml tubes)

Features

• ANSI/ SBS footprint
• Compatible with 384-well and 96-well plates
• Cushion base for added benefits
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Made in USA 
• For Research use only

Compatibility

• 384-well pcr plates
• Some 384-well deep well plates
• Full-, Semi-, and un-Skirted 96-well PCR Plates
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volume

384-Well PCR

Maximum – 39 µL 

Minimum – 5 µL 

__________

96-Well PCR

Maximum – 60 µL (0.2 mL for some beads)

Minimum – 4 µL

Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.