Propargyl-PEG12-amine is a heterobifunctional reagent that enables amide formation with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group is reactive with azide compounds via copper catalyzed azide-alkyne Click Chemistry to yield a stable triazole linkage. The PEG units enhance the hydrophilicity of the molecule in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Propargyl-PEG12-amine is a heterobifunctional reagent that enables amide formation with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The propargyl group is reactive with azide compounds via copper catalyzed azide-alkyne Click Chemistry to yield a stable triazole linkage. The PEG units enhance the hydrophilicity of the molecule in aqueous media. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Norgen’s Legionella sp. TaqMan PCR Kit is designed for the detection of Legionella sp. specific DNA in a real-time PCR based on the use of TaqMan technology. This kit is designed for research use only and not for use in diagnostic procedures. The detection of Legionella sp. specific DNA is based on TaqMan PCR providing a simple, reliable and rapid result for the detection of Legionella sp. infection. Norgen’s Legionella sp. TaqMan PCR Kit includes a PCR control to monitor for PCR inhibition, and to validate the quality of the sample and the detection result. The Legionella sp. TaqMan PCR Kit comprises Master Mix for the target and PCR control detection, Primer & Probe Mix, as well as a positive control and a negative control (nuclease-free water) to confirm the integrity of the kit reagents.
Legionella sp. TaqMan PCR Kit, 100 reactions
Legionella sp. TaqMan PCR Probe/Primer Set and Controls, 100 reactions
For research use only and NOT intended for in vitro diagnostics.
Figure 1 / 3
Click for expanded view
Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
| Component | Cat. TM64450 (100 rxns) | Cat. TM64410 (100 rxns) |
|---|---|---|
| MDx TaqMan 2X PCR Master Mix | 2 x 700 mμL | – |
| Legionella sp. Primer & Probe Mix | 280 μL | 3 x 70 μL |
| Legionella sp. Positive Control | 150 μL | 3 x 50 μL |
| Nuclease-Free Water (Negative Control) | 1.25 mL | 1.25 mL |
| Product Insert | 1 | 1 |
This product is suitable for rapid extraction of RNA (include miRNA) from tissue, cells, blood, s and other clinical samples. RNA can be used directly for RT-PCR, quantitative RT-PCR, test of virus DNA and so on.
Specifications
| Features | Specifications |
| Main Functions | Isolation total RNA（miRNA）from tissue, cell using two columns and DNase plus reagent |
| Applications | RT-PCR, cDNA synthesis, second generation sequencing |
| Products | RNA, miRNA |
| Purification method | Mini spin column |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Clinical tissues, cells, lymphocytes |
| Sample amount | Tissue: <20 mgCells: <5 x 106 |
| Yield | 2-50μg |
| Elution volume | ≥30μl |
| Time per run | ≤25 minutes |
This product is based on silica column purification. Remove paraffin by Buffer DPS. Sample lysis withproteinase K digestion requires only 15 minutes. After lysis, samples are incubated at 80ºC for 15 minutes. Transfer to an adsorption column and RNA is adsorbed on the membrane, while protein is not adsorbed andis removed with filtration. After washing proteins and other impurities, RNA was finally eluted with low-saltbuffer.
Advantages
Kit Contents
| Contents | IVD4121 |
| Purification Times | 50 Preps |
| HiPure DNA Mini Column Ⅱ | 50 |
| HiPure RNA Mini Columns | 50 |
| 2ml Collection Tubes | 150 |
| Proteinase K | 24 mg |
| Protease Dissolve Buffer | 1.8 ml |
| DNase I | 600 μl |
| DNase Buffer | 6 ml |
| Buffer RTL | 40 ml |
| RNA Digestion Buffer | 15 ml |
| Buffer RWC* | 20 ml |
| Buffer RW2* | 20 ml |
| Nuclease Free Water | 10 ml |
Storage and Stability
Proteinase K should be stored at 2–8°C upon arrival. DNase I should be stored at -20°C. However, short-term storage (DNase I up to 1 weeks, Proteinase K up to 8 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions.
This product is suitable for rapid extraction of RNA (include miRNA) from tissue, cells, blood, s and other clinical samples. RNA can be used directly for RT-PCR, quantitative RT-PCR, test of virus DNA and so on.
Description
The DM3260 FluoroBand™ 1 KB Plus (0.1-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM3260 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.
Features
Source
Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.
Range
100 ~ 10,000 bp
Concentration
87 µg/ 500 µl
Recommended loading volume
5 µl/ well
Storage
Protected from light
Room temperature for 6 months
4°C for 12 months
-20°C for 24 months
The DM3260 FluoroBand™ 1 KB Plus (0.1-10 kb) Fluorescent DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with high sensitivity DNA binding fluorescent dye and loading dye for direct gel loading. The DNA Ladder DM3260 is composed of 19 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 900, 800, 700, 600, 500, 400, 300, 200, and 100 base pairs derived from a mixture of PCR products and specifically digested plasmid DNA; these bands can be visualized when illuminated with 470 nm blue light or UV light. This product contains three enhanced bands (3 kb, 1.5 kb and 500 bp) for easier reference. In addition, three tracking dyes, Xylene cyanol FF, Bromophenol blue and Orange G which mimic the migration of 4,000 bp, 500 bp and 50 bp dsDNA during electrophoresis are also added for real time monitoring. Real time observation of the electrophoresis is also possible if compatible light source is fitted to the electrophoresis tank.
