endo-BCN-PEG8-acid

Safety Features

1. User-Friendly Design: The chamber lid and tabletop are covered with heat-insulating resin materials, providing both protection against burns and an aesthetically pleasing appearance. The upward-opening flip-top door saves space, while the rounded corners prevent injury. The specially designed steam discharge and collection system minimizes steam burn risks and enhances operational convenience.

2. Interlock Mechanism and Safety Protection: The safety interlock system is designed to be more sensitive and secure. The chamber lid cannot be opened if there is pressure or steam inside the chamber. The lid can only be opened when the pressure gauge reads “0” MPa. The sterilizer will not start heating if the chamber lid is not properly locked. These features enhance the overall safety of the machine.

3. Over-temperature and Heating Protection: The system continuously monitors the temperature inside the sterilization chamber. If the temperature becomes too high or heating is abnormal, power will be automatically cut off to prevent overheating.

4. Automatic Fault Detection System: The machine performs an automatic self-check when powered on. If a fault occurs during operation, an audible alarm will sound, and a fault code will be displayed.

5. Lid Closure Check System: The system automatically detects whether the chamber lid is securely locked. If the lid is not properly locked, the sterilizer will not start.

6. Leakage, Over-current, and Short-Circuit Protection: If there is leakage in the heating elements or other components, or if over-current or short-circuit conditions occur, the system will automatically cut off power to prevent user injury.

7. Water Shortage and Independent Dry-Burning Protection: Equipped with a low water level sensor and independent dry-burning protection device, the system can monitor the water level in the chamber in real-time to prevent dry burning and avoid false readings. If the low water level sensor fails, the overheat and dry-burning protection system will automatically activate, cut off power to the heating ring, and sound an alarm to ensure safety.

8. Dual Pressure Protection: The system includes both a mechanical safety valve and an electronic over-pressure protection system. If pressure becomes abnormal, the system will relieve pressure and cut off power while sounding an alarm.

9. Back end Safety Testing: The system can be periodically tested for safety and protective measures.

10. Over-pressure Testing: Regular testing ensures that the instrument’s over-pressure protection system can automatically cut off power or that the safety valve can open to relieve pressure.

11. Performance Testing: The instrument’s safety performance has been tested by national authorized inspection agencies, and a test report is available.

Technical Parameters

Model	HB65A Standard TypeHB65B  Auto Water Replenishment TypeHB65C Auto Drying Type	HB90AStandard TypeHB90BAuto Water Replenishment TypeHB90CAuto Drying Type	HB110AStandard TypeHB110BAuto Water Replenishment TypeHB110CAuto Drying Type
Capacity	65L	90L	110L
Dimensions (L × W × H) mm	664×660×994.5	664×660×994.5	664×660×1200
Sterilization Chamber Dimensions (Diameter × Height) mm	φ400×530	φ400×730	φ400×920
Rated Power	2800W	3400W	4500W
Rated Voltage	220V±10%50Hz
Temperature Display Accuracy	0.1℃
Operating Environment	5℃~40℃、Relative Humidity10%～85%
Sterilization Chamber Material	SUS304Stainless Steel
Sterilization Working Temperature	105℃~143℃
Sterilization Time Pre-set Range	1minute ～9999minutes
Melting Temperature Pre-set Range	60℃~100℃
Melting Time Pre-set Range	1minute～9999minutes
Insulation Temperature Pre-set Range	45℃~60℃
Insulation Time Pre-set Range	1minute～9999minutes
Door Opening Temperature Pre-set Range	Solid, Agar, and Waste Modes: 40°C ~ 99°C        Liquid Mode: 40°C ~ 80°C
Clock FunctionTimer Pre-set Range	Timer Pre-set Range: Set operating time (year, month, day, hour, minute), check current time (year, month, day, hour, minute), total sterilization cycles, fault occurrence time, and code.
Pressure Gauge Display Range	0～0.6Mpa
Pressure	Chamber Design Pressure: 0.35 MPa; Each product comes with a quality certificate and a certificate issued by the special equipment manufacturing supervision and inspection department.
Pressure Safety Protection	Dual independent pipeline measurement and control, mechanical and electronic dual pressure protection
Sterilization Modes	·  Solid Mode: Heating → Sterilization → Exhaust, Air Cooling·  Solid with Drying Mode: Heating → Sterilization → Drainage, Exhaust → Drying·  Liquid Mode: Heating → Sterilization → Pre-cooling → Exhaust·  Liquid with Insulation Mode: Heating → Sterilization → Pre-cooling → Exhaust → Insulation·  Waste Mode: Heating → Sterilization → Exhaust, Air Cooling·  Agar Mode: Heating → Melting → Insulation
Exhaust Control and Water Tank	Fully automatic internal exhaust (see instructions for exhaust temperature settings), built-in large-capacity steam condensate collection bottle and water tank
Cover Opening Method and Interlocking Device	Unique eight-column interlocking device, flip-cover switch, touch-type handle
Controller and Memory Storage Function	Microcomputer intelligent control system. 6 fixed operation modes, 82 modifiable modes, 88 memory storage programs
Safety Devices	Door lock interlocking device; Cover closing check; Dry burn protection; Water level sensor monitoring; Electronic over pressure protection; Mechanical safety valve; Over temperature and heating protection; Over current and short circuit protection; Leakage protection; Cooling lock; Burn injury safety protection; Automatic fault detection system
Accessories	Condensate collection bottle, water separation plate, drainage hose, stainless steel basket
Optional Accessories	Printer, cooling fan, item temperature sensor, USB output
Stainless Steel Baskets	(φ360×230)1pcs(φ360×200)1pcs	(φ360×200)1pcs(φ360×400)1pcs		(φ360×200)2pcs(φ360×400)1pcs

Note: The upper limits for cooling lock door temperature and exhaust temperature are related to the boiling point.

Other Optional Accessories

1. Dot Matrix Printer: Capable of printing temperature, time, F0 value, and pressure data. USB data export and curve plotting.

2. Stainless Steel Basket with Base.

3. Pressure Sensor

4. Stainless Steel Bucket

5. Item Thermometer

6. 3Q Validation Adapter

Features and functions:

1. Large-diameter sterilization chamber：The 40 cm large-diameter sterilization chamber provides an exceptionally spacious environment to meet a wide range of sterilization needs.

2. Sterilization temperature：105-138℃.

3. Exhaust control ：After sterilization is complete, the exhaust valve can automatically open to release the exhaust at a pre-set temperature.

4. Verification interface: Provides temperature and pressure inspection ports for easy calibration.

5. Saturated steam monitoring：The system automatically monitors the expulsion of cold air to ensure a pure steam sterilization environment, guaranteeing optimal sterilization effectiveness.

6. Pressure performance：The chamber is designed to withstand a pressure of up to 0.35 MPa, and each unit is tested with a water pressure of up to 0.44 MPa. Advanced pressure protection ensures the safety load of the equipment.

7. Intelligent control system:The microcomputer chip-based intelligent control system monitors the temperature and pressure inside the sterilization chamber in real-time. The chamber lid can only be opened under safe temperature and pressure conditions. The system also provides fully automatic control of the sterilization process and allows for convenient maintenance, inspection, calibration, recording, and future upgrades.

8. Six preset programs:Includes six fixed programs for liquid sterilization and holding, solid sterilization and drying, agar melting and holding, and waste sterilization.

9. Memory storage system:Users can set their own parameters, create multiple programs, and access them at any time. The system allows for operation permissions to be set at three levels—user, administrator, and engineer—to facilitate effective use and management of the sterilizer.

10. Door-opening temperature: Each program can be set with a specific cooling lock door-opening temperature based on the thermal inertia of the sterilized items. This prevents users from opening the door when the items (especially liquid sterilized items) are still in an unsafe condition, thus avoiding burns.

11. Drying function: Thorough drying that meets CE standards, with a cooling lock mechanism.

12. One-touch inquiry function: Allows checking of current time, total number of sterilization cycles, fault occurrence time, and codes.

13. Scheduled start function: Allows you to set a start time so that the sterilizer automatically starts at the scheduled time.

Model:
HB65/ HB90/ HB110

K-CARREZ

SKU: 700004270

40-1000 assays per kit (depending on application)

Content:	40-1000 assays per kit (depending on application)
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: Ambient, Long term stability: See individual component labels
Stability:	> 2 years under recommended storage conditions

Reaction Time (min):	~ 15 min
pH Range:	7.5-8 (recommended)
Application examples:	Dairy samples including milk, cream, whey protein, cheese, yoghurt and infant formula. Other foodstuffs such as meat, fish may also be possible.

The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.

This product is intended to be used as an accessory kit to the K-LOLAC, K-LACTUL, K-LACGAR, K-LATE, K-DLATE and K-FRHYD assay kits. It may also be suitable for other assay methods where sample clarification is required to remove fats or proteins before sample determination steps.

Note: this method is unsuitable for sample preparation prior to the determination of ascorbic acid (vitamin C), citrate and urea/ammonia.

Advantages

• User-friendly procedure
• Ready to use reagents
• Allows easy sample clarification of complex matrices with high protein and fat content

The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.

Overview

• Sequentially purify total RNA (and miRNA), DNA and proteins from a single sample
• No sample splitting or need to use phenol or precipitation methods
• Purify RNA/DNA/Protein from cultured animal cells, tissues, blood, bacteria, yeast, fungi or plants
• Purification is based on spin column chromatography that uses Norgen’s proprietary resin separation matrix

RNA/DNA/Protein Purification Plus Kit

This kit provides a rapid method for the high throughput isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, or yeast. The kit employs two columns: 1) for gDNA purification and 2) for RNA purification utilizing Norgen’s resin columns (superior for the binding of all RNA sizes including miRNA). The proteins are also purified on the second column after RNA elution. The proteins are eluted in buffer and are ready for downstream application without any further clean up required. The proteins can be quantified directly, used in western blots, ELISA or mass spectrometry. This kit provides a rapid spin-column method for the isolation and purification of total RNA, genomic DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, blood, bacteria, yeast, fungi or plants.

RNA/DNA/Protein Purification Plus Micro Kit

This kit provides a rapid spin-column method for the isolation and purification of total RNA, DNA and proteins sequentially from a single sample of cultured animal cells, small tissue samples, microdissected samples including LCM, stem cells, sorted cells, and CTC. The total RNA, genomic DNA and proteins are all column purified in less than 30 minutes. The RNA and DNA can be eluted in as little as 20 µL while the protein can be eluted in as little as 50 µL. This kit provides the same performance as if the samples were isolated from dedicated kits.

RNA/DNA/Protein Purification 96-Well Plus Kit

The kit employs two plates: 1) for DNA purification and 2) for RNA purification utilizing Norgen’s resin (superior for the binding of all RNA sizes including miRNA). Please see the protocol schematic below.

Details

Supporting Data

Figure 1 / 4

Previous

Next

Click for expanded view

Kit Specifications
Maximum Column Binding Capacity	35 μg for RNA 10 μg for DNA 100 μg for protein
Maximum Column Loading Volume	650 μL
Size of RNA Purified	All sizes, including small RNA (< 200 nt)
Size of DNA Purified	≥ 30 kb
Time to Complete 10 Purifications	30 minutes
Maximum Amount of Starting Material:Animal CellsAnimal TissuesBloodPlant / Fungi Tissues	5 x 105 cells5 mg (for selected tissues)50 µL25 mg
Average Yield* HeLa Cells (5 x 105 cells) HeLa Cells (5 x 105 cells) HeLa Cells (5 x 105 cells)	RNA: 7.5 μg DNA: 1-2 μg Protein: 70 μg

Storage Conditions and Product Stability
The Protein Loading Dye should be stored at -20°C after the addition of DL-Dithiothreitol (DTT). All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.

Component	Cat. 47700 (50 preps)	Cat. 51600 (50 preps)	Cat. 51700 (96 preps)
Buffer SKP	40 mL	40 mL	–
Lysis Buffer Q	–	–	40 mL
Wash Solution A	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL	2 x 38 mL 1 x 18 mL
Elution Solution A	6 mL	6 mL	20 mL
Elution Buffer F	15 mL	15 mL	2 x 15 mL
Wash Solution C	30 mL	30 mL	60 mL
Binding Buffer A	8 mL	8 mL	8 mL
Elution Buffer C	8 mL	8 mL	30 mL
Protein Neutralizer	4 mL	4 mL	4 mL
Protein Loading Dye	2 mL	2 mL	3 x 2 mL
gDNA Purification Columns	50	–	–
gDNA Purification Micro Columns	–	50	–
gDNA Purification 96-Well Plate	–	–	1
RNA/Protein Purification Columns	50	–	–
RNA/Protein Purification Micro Columns	–	50	–
RNA/Protein Purification 96-Well Plate	–	–	1
Collection Tubes	150	150	–
Collection Plate	–	–	5
Elution Tubes (1.7 mL)	150	150	–
Elution Plate	–	–	3
Lysis Preparation Plate	–	–	2
Adhesive Tape	–	–	4
Product Insert	1	1	1