Description 

The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is a ready-to-use three-color protein standard with 13 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine Buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and 10 to 170 kDa Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.

Features

• Ready-to-use — Premixed with a loading buffer for direct loading, no need to boil.
• Three reference bands — 75 kDa (red), 40 kDa (green), and 20 kDa (blue)

Contents 

Approximately 0.1~0.4 mg/ml of each protein in the buffer (20 mM Tris-phosphate (pH 7.5 at 25°C), 2% SDS, 0.2 mM DTT, 3.6 M urea, and 15% (v/v) glycerol). 

Quality Control 

Under suggested conditions, PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range resolves 13 major bands in SDS-PAGE (Tris-Glycine, MOPS, and MES buffer) and after Western blotting to nitrocellulose membrane. 

Storage

4°C for 3 months 
-20°C for long term storage

The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is a ready-to-use three-color protein standard with 13 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine Buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and 10 to 170 kDa Bis-Tris (MES) buffer). Proteins are covalently coupled with different chromophores for easy identification of bands, with three reference proteins carrying enhanced intensity corresponding to a blue band at 20 kDa, green at 40 kDa, and red at 75 kDa, respectively, as separated on SDS-PAGE (Tris-Glycine buffer). The PM5000 ExcelBand™ 3-color Pre-Stained Protein Ladder Regular Range is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.

Introduction

The Kit is specially designed for simultaneous purification of genomic DNA and total RNA from formalin-fixed, paraffin-embedded (FFPE) tissue sections. Purified DNA/RNA is suitable for use in applications such as real-time PCR and pyrosequencing.

Details

Specifications

Features	Specifications
Main Functions	Co-isolation DNA and RNA from FFPE tissue
Applications	RT-PCR, cDNA synthesis, PCR and second-generation sequencing, etc.
Purification method	Polydisperse silicon based magnetic beads (DNA)Monodisperse carbonyl magnetic beads (RNA)
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Adaptive instrument	Nucleic acid extractor and pipetting workstation
Sample type	FFPE slice, FFPE puncture sample, embedded tissue
Sample amount	No more than six 10 µm sections of 150 mm2 surface area or three 20µm sections of 150 mm2 surface area
Yield	DNA: 1 – 10 μg,  RNA: 1 – 25 μg

Principle

The sample is lysed and digested under the action of lysate and protease. DNA/RNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, the supernatant contain RNA was collected and bind to MagBind Particles. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA/RNA was eluted by Elution Buffer.

Advantages

• High quality – high purity total RNA / DNA can be directly used in various downstream applications
• Safe – no phenol chloroform extraction required
• Simultaneous extraction – simultaneously isolate DNA and RNA from one sample
• Post digestion sorting – higher DNA and RNA yields
• High RNA yield – monodisperse carbonyl adsorption

Kit Contents

Contents	R632701	R632702	R632703
Purification Times	48 Preps	96 Preps	5 x 96 Preps
MagBind Particles	1.1 ml	2.5 ml	11 ml
MagPure Particles N	1.1 ml	2.5 ml	11 ml
Proteinase K	24 mg	48 mg	220 mg
Protease Dissolve Buffer	3 ml	10 ml	15 ml
Buffer DPS	50 ml	100 ml	2 x 250 ml
Buffer ATL	20 ml	30 ml	120 ml
Buffer BST1	20 ml	40 ml	200 ml
Buffer BXW1*	44 ml	110 ml	3 x 110 ml
RNase Free Water	15 ml	30 ml	120 ml

Storage and Stability

Proteinase K, MagPure Particles N and MagBind Particles should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stablefor at least 18 months under these conditions.

Experiment Data

The Kit is specially designed for simultaneous purification of genomic DNA and total RNA from formalin-fixed, paraffin-embedded (FFPE) tissue sections. Purified DNA/RNA is suitable for use in applications such as real-time PCR and pyrosequencing.

Description

Attogene’s Human IgG/IgM universal fluorescent lateral flow assay kit is a ready-to-use, universal test strip, which is based on the lateral flow technology that uses 655nm Emission Quantum Dot particles containing streptavidin to conveniently capture biotinylated antigens. The device is designed to easily develop qualitative or quantitative rapid test systems for detection of anti-human IgG and IgM antibody that react to the any antigen that can be biotinylated (i.e. viral antigen, autoimmune antigen) and is easily customizable providing every laboratory with the possibility to perform assay feasibility.

Formats (fluorescent broad range UV light excitation range of 300nm to 400nm, 610nm emission) Streptavidin conjugate pad):

Antibody tests are a method of choice to determine if a person has been exposed to a pathogen or not. They are also incredibly valuable in the detection of autoantibodies that can be found in human autoimmune disorders. In this test, a biotinylated antigen (User supplied) is mixed with a biotinylated rabbit IgG (bind to goat anti rabbit control line) and sample (human sera or plasma) is simply mixed into with the specially designed assay running buffer in a well of the supplied 96-well plate, mixed and is then added to the sample port of the cassette. Generally, the reaction is complete in 10-15 minutes. It is very important to note that the relative stoichiometry between the biotinylated antigen, biotinylated rabbit IgG added, and the streptavidin gold is critical for assay optimization. The appropriate concentration of biotinylated antigen to use with strips is dependent upon the purity and sequence and a standard curve can be used to determine the relative ratio (generally between 1ng-100ng per test). A positive control line (biotin-rabbit IgG) antibody will bind to the goat anti rabbit (GAR) line on the test to ensure the assay is running appropriately.